valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
Make sure all items listed on the front of this guide are included in the box. 2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT. 3. Study this setup diagram. 4. Note: This turntable can be used as a standalone unit, as well as with the items listed in the quick setup diagram. 5. Make sure all devices are turned off and all faders and gain knobs are set to “zero” 6. Connect all stereo input sources as indicated in the diagram. 7. Connect the stereo output devices to power amplifier(s), tape decks, and/or other audio sources. 8. Plug all devices into power. 9. Switch everything on in the following order. •Turntable •Mixer (not included) •last, any amplifiers or output devices (not included) 10. When turning off, always reverse this operation by, •turning off amplifiers (not included) •mixer (not included) •Turntable 11. Go to for product registration. More information about this product may be found at BATTERY INSTALLATION This product can be powered by 6 “D” Cell batteries. They should be loaded as show above, with the positive end toward the handle. PRODUCT FEATURES 1. Platter: Place your record on the platter. 2. Control Panel: Please see the alternate detailed section on the control panel features. 3. On Board Speaker: Use this speaker to listen to the audio. 4. Tone Arm Clip: Use this clip to secure your tonearm when storing and transporting the unit. 5. Tonearm: This unit comes with a ready to use prebalanced tonearm and cartridge. The cartridge is user replaceable with parts from your distributor located in the warranty guide. The platter starts spinning once the tonearm is lifted over the record. 6. 45 Adapter: Use this adapter with 45 rpm records. 7. Dust Cover: This cover protects the turntable from dust and abuse while not in use or while in transport. 8. Dust Cover Latch: This latch holds the dustcover securely in place, and can easily be opened by sliding it to the left. 9. Carry Handle: Use this handle easily remove the unit from record crates and bags, as well as carrying it in transport. 10. Battery Cover: This holds the batteries securely in place during use and transport. It easily slides open and closed as indicated on the cover itself. NOTE: This unit uses 6 “D” cell batteries (not included). They should be installed in the proper direction indicated OUTPUT PANEL 1. Power Switch: Use this switch to turn the power on and off. 2. AC In: This turntable is designed to work with either batteries or the power supply cord that comes with it. While the power is switched off, plug the power supply into the turntable first, then plug it into the wall power outlet, then switch on. NOTE: This unit can also be powered by 6 “D” Cell batteries (Not Included). 3. Master Output (RCA): This “line level” output is for connecting to the input of an external audio device such as a DJ mixer, tape recorder, CD Burner, PA system, powered speaker, or a home stereo. The level of the master stereo output signal is controlled by the audio level control. 4. 1/8” Headphone Jack: Use this jack with the 1/8” mini headphone plug. NOTE: Be sure the volume control is set to the OFF position before plugging in any headphones to avoid permanent hearing damage. 5. 1/4” Headphone Jack: Use this jack with the 1/4” headphone plug. NOTE: Be sure the volume control is set to the OFF position before plugging in any headphones to avoid permanent hearing damage. POWER PITCH 33 RPM 45 78 -10% +10% TONE LOW HIGH AUDIO OFF CONTROL PANEL FEATURES 1. Audio Level Control: This rotary control adjusts the volume level of the onboard speaker, headphone and line out outputs. NOTE: Make sure the Audio Level Control is set to OFF when connecting any alternate audio output devices. 2. Tone Control: This feature allows you to adjust the low and high frequency audio levels. 3. Pitch Control: This knob adjusts the pitch of the music +/- 10%. In the center position the pitch is at 0%. NOTE: In order for the pitch to be adjusted, the tempo also changes according to what the pitch setting. 4. RPM Selection Switch: This switch selects the RPM of the turntable platter -- 33, 45, and 78 RPM. 5. Power LED: This LED indicates that the power switch on. Make sure the power is off when storing or transporting the unit, to avoid wasting battery power. GUIA DE instalacion RAPID (ESPANOL) NORMAL FILTERS FLANGER AUTOPAN L R AUTOCUT FILTERED LOPASS RATE VARI-CUT RATE DJ HEADPHONE AUDIO RECORDER POWER MIXER 1. Asegurese de que todos los articulos incluidos al inicio de este manual estan incluidos en la caja. 2. LEA LAS INSTRUCCIONES DEL FOLLETO DE SEGURIDAD ANTES DE UTILIZAR EL PRODUCTO. 3. Estudie este diagrama de instalacion. Nota: Este giradiscos puede utilizarse como unidad de instalacion local ademas de ser utilizado junto con los articulos enumerados en el diagrama de instalacion rapida. 4. Asegurese de que todos los dispositivos estan apagados y de que todos los faders y potenciometros de ganancia estan en...