valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
3. Do not expose this unit to direct sunlight or a heat source such as a radiator or stove. 4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 5. When moving this equipment it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 7. DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON CONTROLS, SURFACES OR SWITCHES. IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT: 1 (732) 346-0061. DO NOT ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER. FUNCTIONS: 12 POWER SWITCH: The POWER SWITCH turns the unit ON or OFF. Make sure the switch is in the ‘OFF’ position prior to making any connections. START/STOP BUTTONS: These buttons start and stop the turntable motor. Both buttons have the same function. If they seem to not be functioning, check to make sure that the Motor Drive Belt is properly installed in the SETUP INSTRUCTIONS. MOTOR ON/OFF: This button allows you to start or stop the rotation of the platter. SPEED SELECTOR: Select the desired speed by depressing the 33, 45 or 78 (33 & 45 simultaneously) SPEED SELECTOR button. REVERSE: Push the REVERSE button to play your track in reverse. Push the REVERSE button again to cancel this feature. 45RPM RECORD ADAPTER PITCH SLIDE CONTROL: The TT-1000/TT-1100USB is equipped with a PITCH SLIDE CONTROL. When the PITCH SLIDE CONTROL is in the center position, the speed will be 33, 45, or 78 depending on which SPEED SELECTOR button is pushed. When the PITCH SLIDE CONTROL is positioned off center, the pitch can vary ± 10% or ± 20% depending on which Pitch setting was selected and the position of the PITCH SLIDE CONTROL. TARGET LIGHT: Plug the TARGET LIGHT into the RCA STYLE JACK, located adjacent to the PLATTER. Turn the POWER switch to the "ON" position, at which point the TARGET LIGHT will light up. COUNTERWEIGHT: Attach the COUNTERWEIGHT to the back of the tonearm, with the number scale facing forwards, by turning the weight counterclockwise. ANTI-SKATE ADJUSTMENT: This knob is used to compensate for inward tracking forces. HEADSHELL/TONE ARM LIFT: Using the handle on the HEADSHELL to carefully position the TONE ARM over the desired position on the record. Lower the TONE ARM slowly, while letting go of the TONE ARM over the record where you want to play. You may also use the TONE ARM LIFT to raise and lower the TONE ARM. ARM CLAMP: Release the ARM CLAMP found on the ARM REST When play is over, raise the TONE ARM, move it onto the ARM REST, and secure it with the ARM CLAMP. SLIPMAT: Put the SLIPMAT on the PLATTER. 13 14 15 16 17 18 5 TT-1000/TT-1100USB 8 9 10 11 6 7 4 5 ADDITIONAL TT-1100USB INFO PHONO/LINE SWITCH: There is a switch on the back panel, next to the RCA cables, that selects between PHONO/LINE. Use PHONO level for plugging into a turntable input on a home stereo. Use the LINE level for plugging into CD/AUX/TAPE inputs. WARNING: You may damage your receiver if you plug in a LINE level into a PHONO input. USB Audio Output: Use the included USB Cable to connect your turntable to your computer. The USB connection will provide audio from the turntable and stereo input to your computer. You may wish to install and use the AUDACITY software (PC and Mac), which allows you to take advantage of advanced audio editing features, such as audio normalization, noise removal and automatic track separation. White (L+)......................................Left Channel + Blue (L-)............................................Left Channel - Red (R+).......................................Right Channel + Green (R-).....................................Right Channel - SPECIFICATIONS: CARTRIDGE INSTALLATION: Connect the lead wires to the cartridge terminals. For your convenience, the terminals of most cartridges are color-coded. Connect each lead wire to the terminal of the same color. In case your cartridge is not marked the positive leads are the ones on top negative below, left leads are the left channel, and right leads are the right channel. TT-1000/TT-1100USB TURNTABLE SECTION: Type..................................................................Belt Drive Manual Turntable Drive Method....................................................................................Belt Drive Motor..................................................................................................DC Motor Speed................................................................................33 1/3 or 45 RPM Wow and Flutter..................................................Less than 0.25% WRMS* *THIS RATING REFERS TO THE TURNTABLE ASSEMBLY AND PLATTER ONLY AND EXCLUDES EFFECTS OF RECORDS, CARTRIDGES OR TONEARMS. TONEARM SECTION: Type...............................................Statically Balanced S-shaped Tonearm Headshell Weight...................................................................................5.6 g GENERAL: Out...
Questo manuale è adatto anche per i modelli :Stereo - TT-1000 (1.24 mb)