valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
For more information, see the “Connecting to alternate audio source” section. SSttaarrtt PPllaayyiinngg 1. With your Zune docked inside the Altec Lansing M604, turn on your Zune. 2. Turn on the Altec Lansing M604 by pushing the power button located on the top of the unit. An LED will light when the power is on. PPoowweerr OOffff The Altec Lansing M604 includes a pass-through video feature that allows you to display videos and photos from your Zune onto a television set. To connect the Altec Lansing M604 to a television set or VCR, follow the steps below: 1. Make sure the power to your television set or VCR is turned off. 2. Locate a Composite (RCA) cable (sold separately). 3. Connect one end of the Composite (RCA) cable to the Composite (RCA) port on the back of the Altec Lansing M604 and the other end to the yellow Composite (RCA) input on your television set or VCR. CCoonnnneeccttiinngg ttoo aalltteerrnnaattee aauuddiioo ssoouurrccee The Altec Lansing M604 includes a auxiliary input jack that allows you to connect to alternate audio sources, such as CD players, MP3 players, portable DVD players, and laptops. To connect the Altec Lansing M604 to an alternate audio source, follow the steps below. 1. Locate a 3.5 mm stereo cable. 2. Connect one end of the 3.5 mm stereo cable into the auxiliary input jack (AUX) located on the back of the Altec Lansing M604, and the other end to the headphone or line out jack on your alternate audio device. 3. Set the volume on the audio source at mid-level. 4. Set the volume on the Altec Lansing M604 at minimum level and adjust upward to a comfortable listening level. VVoolluummee The “+” and “–” buttons on the top of the Altec Lansing M604 are the master volume controls. Press and hold the “+” button to increase the volume and the “–” button to decrease the volume. An LED indicator is located on the front of the unit. TTrreebbllee aanndd BBaassss To control treble or bass levels, press the “TREBLE” or “BASS” buttons on the top of the unit and press and hold the “+” button to increase the corresponding level, or the “–” button to decrease it. To control treble or bass levels using the wireless remote, press the “TREBLE” or “BASS” or buttons on the wireless remote, and press and hold the “+” button to increase the corresponding level, or the “–” button to decrease it. An LED indicator located on the front of the unit will indicate the corresponding level. Note: After a few seconds, the “+” and “–” controls will automatically reset to “Volume.” RReesseett To reset volume, bass and treble functions to original factory settings, press and hold the power button on the top of the unit for five seconds. Turn off the Altec Lansing M604 by pushing the power button located on the top of the unit. The LED will turn off. SSyynncciinngg wwiitthh yyoouurr PPCC The Altec Lansing M604 includes a pass-through feature that allows you to connect your Zune to your computer. To connect the Altec Lansing M604 to a PC or laptop, follow the steps below: • Locate a mini USB-to-USB cable and connect the mini USB connector to the back of the Altec Lansing M604, and the USB connector to the USB port on the PC computer, Mac computer, or USB hub. • Make sure the M604 is on. 2 No Power LED is lit (AC Operation). No sound is coming from speakers. There is a crackling sound coming from speakers. There is a crackling sound coming from speakers (when connected to PC or laptop). The sound is distorted. There is radio interference. Intermittent buzzing. Speaker system exhibits erratic or unexpected behavior. Controls do not function. The power supply isn’t connected to a wall outlet and/or the power supply connector is not plugged into the power supply jack on the back of the Altec Lansing M604. The surge protector (if used) isn’t powered on. The wall outlet is not functioning. The power isn’t turned on. The volume is set too low. The Zune is not correctly seated into the docking station. If using an alternate audio source, the audio source is not properly connected to the Altec Lansing M604 or there is a problem with the alternate audio source. The Zune is not correctly seated into the docking station. If using an alternate audio source, the audio source is not properly connected to the Altec Lansing M604 or there is a problem with the alternate audio source. The operating system’s volume level is set too high. The Altec Lansing M604’s volume level is set too high. The unit is too close to a radio tower. The unit is located too close to a GSM cell phone. Static electricity, momentary interruption of power, or abnormal operating conditions may be responsible. Insert the barrel connector from the power supply into the DC connector on the back of the Altec Lansing M604. After this connection is made, insert the power supply into a wall outlet. If the power supply is plugged into a surge protector, make sure the surge protector is switched on. Plug another device into the same wall outlet to confirm the outlet is w...