Log:
valutazioni - 2, GPA: 3 ( )

Istruzioni per l'uso Aiwa, Modello CSD-TD902

Produttore : Aiwa
File Size : 506.48 kb
File Nome :
Lingua di insegnamento: enesfr
Vai a scaricare



Facilità d'uso


1 Select a station. 2 Press PROGRAM once so that “M” is displayed to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. Preset number En Frequency 3 Repeat steps 1 and 2. The next station will not be stored if a total of 15 preset stations have already been stored for a band. To listen to preset stations Select a band then press ePLAY/PAUSE/PRESET (ePLAY/PAUSE) repeatedly. To clear a preset station Select the preset number first. Within 5 seconds, hold down PROGRAM until “M” and the preset number disappear in the display. The higher numbers in the band are decreased by one. ENGLISH 7 RADIO TAPE CD FUNCTION C 6STANDBY SKIP/SEARCH DOWN TUNING UP STOP/ BAND PLAY/PAUSE/ PRESET PROGRAM REPEAT/MODE OSC RADIO TAPE CD FUNCTION C 6STANDBY SKIP/SEARCH DOWN TUNING UP STOP/ BAND PLAY/PAUSE/ PRESET PROGRAM REPEAT/MODE OSC CD OPERATION C 1 Select CD with FUNCTION. The power is turned on. 2 Press PUSH OPEN to open the disc compartment. Place a disc with the printed side up and close the disc compartment. PUSH OPEN Total number of tracks and total playing time are displayed. 3 Press ePLAY/PAUSE/PRESET (ePLAY/PAUSE) to start play. The number of the track being played and elapsed playing time are displayed. sSTOP/BAND – Stops play. ePLAY/PAUSE/PRESET (ePLAY/PAUSE) – Pauses play. To resume play, press again. r, tSKIP/SEARCH – Searches for a particular point during playback. Hold down ror tand then release it. – Skips to the beginning of a track. Press ror t repeatedly. REPEAT/MODE/OSC – Repeats a single track or all tracks. Select as follows. : A single track is played repeatedly. Select a track with ror t. : All tracks are played repeatedly. After listening, select TAPE/6STANDBY with FUNCTION to turn the power off. NOTE • Do not use irregular shape CDs (example: heart- shaped, octagonal ones). It may result in malfunctions. • Do not place more than one disc in the disc compartment. • Do not try to open the disc compartment during play. • Do not touch the lens. Doing so may cause malfunctions. • The unit may not play a CD-R disc that is recorded on personal computers or some kinds of CD-R recorders because of differences in recording platforms. • Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R disc. It may cause malfunction. • Do not load an unrecorded CD-R disc. It will take over 30 seconds to read the disc. The disc may be damaged if you try to open the disc compartment while reading the disc. 8 ENGLISH REPEAT/ PROGRAM MODE/OSC e PLAY/PAUSE r, t SKIP/SEARCH s STOP/BAND (CSD-TD19 only) PROGRAMMED PLAY Up to 16 tracks can be programmed from the disc. 1 In stop mode, press PROGRAM. 2 Press r, tto select a track, then press PROGRAM to store it. Track number Program number 3 Repeat step 2 to program other tracks. 4 Press sto finish the program. Specifications Tuner section Frequency range, antenna – FM: 87.5 - 108.0 MHz Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna Deck section Track format – 4 tracks, 2 channels / Frequency range – Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system – AC bias / Erasing system – Magnet erase / Heads – Recording/playback head (1), Erasure head (1) CD player section Disc – Compact disc / Scanning method – Non-contact optical scanner (semiconductor laser) General Speaker – 100 mm cone type (2) / Power output – 2 W + 2 W (EIAJ 8 ohms, T.H.D. 10% DC) / Power requirements – DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption – 12 W / Dimensions (W . H . D) – 390 . 167 . 255.5 mm / Weight (excluding batteries) – 2.7 kg / Accessory – Remote control (1, CSD-TD19 only), AC cord (1) Specifications and external appearance are subject to change without notice. COPYRIGHT Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used. En Total number of the programmed tracks 5 Press eto start play. To check the program, press ror tin stop mode. To clear the program, hold down PROGRAM in stop mode until the display changes. To change the programmed tracks, clear the program and repeat all the steps again. If an erroneous display or malfunction occurs Select CD function first. Hold down sand press e. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. ENGLISH 9 ADVERTENCIA PARA REDUCIR EL RIESGO DE INCENDIOS O SACUDIDAS ELECTRICAS, NO EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.” Explicacion de los simbolos graficos: El simbolo del relampago con la punta en flecha dentro de un triangulo equilatero, sirve para alertar al usuario de la pres...

Questo manuale è adatto anche per i modelli :
Stereo - CSD-TD19 (506.48 kb)
Stereo - CSD-TD901 (506.48 kb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie