valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
O Preset stations again. » Knowledge section 71In case of difficulty 71In case of difficulty HM-381MD (En) Symptoms related to MD standard Symptom Cause “DISC FULL” is displayed while the disc still has a remaining recordable time. O More than 255 tracks (track No. 256 or more) cannot be recorded. (There may be also cases in which recording is impossible while the track number is less than 256.) In such a case, the REMAIN time display shows “0:00”. The possible recording time does not increase even when a short track is erased. O When the remaining time of the entire disc is less than 12 sec, the remaining time indication on the display becomes “0:00”. When the total time of the deleted tracks exceeds 12 sec, the display changes to the recordable time. O When a short track is deleted on a repeatedly edited disc, the remaining time may not increase. Tracks can not be connected. O Connection of the track resulting from edit processing may not be possible. The time which has been recorded on the MD and the remaining time do not add up to the maximum recording time (60 or 74 min.). O As recording is executed with 2 sec. as the minimum unit, the display time may not coincide. When search is performed in a track which has been compiled by editing, the sound is sometimes interrupted. O This derives from the restriction in the MD system standard and not a malfunction. The track numbers are not assigned correctly. O Depending on the contents of the recorded source (CD etc.), the track numbers may not be assigned correctly. “READING” is displayed for an abnormally long time. O When a new recordable MD (with nothing recorded) is inserted, “READING” is displayed longer than usual. The time display becomes inaccurate with a monaurally recorded disc. O Monaural recording and stereo recording are executed according to different formats. This is not a malfunction. Input of 1792 title characters is not possible. O The title recording area is used in units of 7 characters, so that input of 1792 characters may not be possible. MD recorder section (other symptoms) Symptom Cause Remedy Sound is not output even when the play key is pressed. O No disc has been loaded. O A non-recorded disc has been loaded. O Load a disc. O Load a prerecorded disc or playback- only disc. 8 Recording is not possible O The disc is write-protected. O An attempt is made to record digital signal from a source while its digital copy has been prohibited by SCMS. O The recording level is too low. (During AUX input operation) O A playback-only disc has been loaded. O The disc does not have a recordable area. O The input selector is set to MD. O Change the position of the write protect tab to the write position or use a recordable disc. O Recording is not possible. O Adjust the AUX input level. O Use a recordable disc. O Use another disc. O Set the input selector to the source to be recorded. 8 . Sound is distorted. O The recording level has not been adjusted. (During AUX input operation) O A disc in which distorted sound has been recorded is played. O Adjust the AUX input level. O Record again. Noise is noticeable. O An external noise is induced. O Install the unit at a position apart from an electric appliance or TV set. The display goes out for a moment after the unit has been turned ON. O Switching is operated too quickly. O This is not a malfunction. Knowledge section 72 In case of difficulty 72 In case of difficulty HM-381MD (En) MD recorder section (Displayed messages and actions to be taken against them) Displayed Message Meaning Action NO DISC O No disc is placed on the tray. O Load a disc. CAN'T COPY O An attempt is made to record digital signal from a source while its digital copy has been prohibited by SCMS. O Switch to analog recording. DISC FULL O There is no recordable area on the disc. O An attempt is made to record a 256th track. O Use another recordable disc. O More than 256 tracks cannot be recorded per disc. TITLE FULL O An attempt is made to assign a title with more characters than usable. O Refer to “Total number of title characters”. p BLANK DISC O The disc does not contain any recordings. O When playback is required, use a recorded disc. NO TRACKS O The disc does not contain any tracks but has a disc title. O The disc can be used for recording without any problem. READING O The TOC *1 data of the disc is being read. O This is a normal operation. WRITING O The data related to editing or recording is being written in the disc. O This is a normal operation. DISC ERROR O The contents of UTOC *2 are abnormal. O Perform “ALL ERASE” operation. If this is not possible, use another disc. O CAN'T EDIT O An attempt is made to perform editing beyond the restrictions, for example to erase a track which is too short. O Perform editing following the restrictions. ?(blinking) O This is a message for confirming if editing can really be executed. O Press the ENTER key to execute editing. PROTECTED O The minidisc is write-protected. O Cancel the write ...