Log:
valutazioni - 4, GPA: 5 ( )

Istruzioni per l'uso Kenwood, Modello XD-855

Produttore : Kenwood
File Size : 2.08 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


. button repeatedly until the desired track number is shown. • To start playback from a desired track, press the P. CALL 4 1 or . . button whilst in the stop mode to select the track number, and then press the 3 button. Note : Tracks skipping can only search for music on a single disc. Cue and review 7 STOP 7 3 3 7 STOP P.CALL 4 1 . . P.CALL 4 1 . .7 1 Load a disc and begin playback. 2 Hold down the P. CALL . . button for audible fast forward, and hold down the P. CALL 4 1 button for audible fast reverse. 3 Normal playback will resume when the P. CALL 4 1 or . . button is released. Notes : • When the end of the disc is reached whilst cueing, “END” will appear in the display and CD operation will be paused. (Even though the next disc has been loaded, the disc will not be switched.) Press the P. CALL 4 1 button for fast reverse or press the 7 STOP button to stop CD operation. • If the beginning of the disc is reached whilst reviewing, the mode will automatically switch to normal playback at that point. Repeat play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. To repeat all tracks on up to 3 discs : Press the 3 button twice. • “RPT.” will light up on the display. To repeat a programmed sequence : 1 Programme a sequence of up to 32 tracks. (see page 18) 2 Press the 3 button again. • “RPT.” will light up on the display. To cancel repeat play : Press the 3 button again. • “RPT.” will goes off. Note : • When using repeat play, be sure to press the 7 STOP button after you are through listening. Otherwise, the CD(s) will play continuously. 17 EN 1 2 2 3 3 5 5 CLEAR 1 2 2 3 3 5 5 CLEAR Program playback You can playback the tracks on the CDs in the disc 1-3 position in any order desired. By specifying the disc numbers from 1 to 3, and the track numbers from 1 to 99, you can choose up to 32 selections for playback in the order you like. 1 When in the stop mode, use the disc number buttons (DISC 1 - DISC 3) to select the desired disc number. 2 Press the P. CALL 4 1 or . . button to select the desired track. 3 Press the MEMORY/SET button. • “PGM” will light up on the display to show that the programmed sequence is being entered into memory. 4 Repeat steps 1 -3 for any other track. Up to 32 tracks can be programmed. • If you make a mistake whilst in the programming mode (“PGM” will light up on the display) or if you wish to change your selections, the programmed tracks can be cleared by pressing the CLEAR button. The tracks will be cleared sequentially, starting with the last track entered. 5 Press the 3 button to start playback of programmed selections. To clear the programmed selections : Press the CLEAR button on the remote control whilst the disc is stopped. • Each time the button is pressed, one track will be cleared, beginning with the last track programmed. Notes : • Opening the disc tray, automatically cancels the programmed sequence. • Even if you press the ON/STANDBY button to enter the standby mode or the function is changed from CD to some other function, the programmed selections will not be cleared. • During program playback operation, random play is not possible. 18 EN RADIO OPERATION 4 1 2,3, 5,6 2,3, 5,6 4 1 After use : Press the ON/STANDBY button to enter the standby mode Note : • The last station turned in will be recalled, even after changing the tuning band or the function, or after switching the unit to the standby mode. Tuning 1 Press the ON/STANDBY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired frequency band. (FM ST, FM or AM) 4 Press the TUNING/TIME (%UP or fiDOWN) button to tune into the desired station. Manual tuning : Press the TUNING/TIME (%UP or fiDOWN) button as many times as required to adjust the frequency shown on the display to the frequency of the desired station. Auto tuning : When the TUNING/TIME (%UP or fiDOWN) button is pressed for more than 0.5 second, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Notes : • When radio interference occurs during auto scan tuning, auto scan tuning may stop automatically at that point. • If a weak station signal is found during auto scan tuning, the station will be skipped. • To stop the auto tuning, press the TUNING/TIME (%UP or fiDOWN) button again. • When a RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. Finally, the station name will appear.(For UK and Europe only) 5To receive an FM stereo transmission, press the TUNER (BAND) button so that the “ST.” indicator on the display lights up. • “ ” will light up on the display when an FM broadcast is in stereo. 6 If the FM reception is weak, press the TUNER (BAND) button so that the “ST.” indicator goes off. • The reception changes to mono, the sound becomes clearer. 19 EN Backup function : The backup function protects all station presets for a few hours should there ...

Questo manuale è adatto anche per i modelli :
Stereo - XD-655 (2.08 mb)
Stereo - XD-755 (2.08 mb)
Stereo - XD-755E (2.08 mb)
Stereo - XD-855E (2.08 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie