valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
Timer operation Timer operation Operate easy To use Timer (O.T.T.) Playback of the selected input source starts at the specified time, and the unit is switched off after one hour. This timer operates only once directly after setting. Sleep timer (SLEEP) The unit is turned OFF automatically after the specified period has elapsed. Timer playback, timer recording (PROG.1, PROG.2) With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set time period. AI timer playback (PROG.1, PROG.2) Operate easy To use Timer (O.T.T.) Timer playback is possible simply by setting the time. The source selected last before the unit was switched off will be played. One hour after start of timer playback, the unit will be switched off automatically. 1Select the source to be played. 2Switch OFF the unit supply. 3Press the MODE key. 4Set the ON time. 5Press the ENTER key. The time is returned. The time is advanced. . When the MODE key is pressed, the input source and the ON time are displayed. . The ON time can be set in steps of 5 minutes. Press the MODE key twice while the unit is OFF. To cancel ON time display Sleep timer Set the number of minutes after which the unit is to be turned OFF. 1Turn the unit ON. 2Set the time. Turn the unit OFF or press the SLEEP key until the sleep time is cancelled. To cancel . The unit is turned OFF automatically after the set time has elapsed. . Each press decreases the time by 10 minutes. The maximum time that can be set is 90 minutes. 90=80=70...30=20=10=Cancel=90=80... Duration for sleep timer Lights The MD operates on the basis of the information read from the disk into memory. Before timer setting with the MD, leave the unit ON for 10 min. or more to make the memory backup function effective. k Note Each press switches the modes as follows. 1 “O.T.T.” lit........... The timer is used. 2 “O.T.T.” not lit.... The timer is not used. The volume increases gradually after start of timer playback. The program timer does not operate until the end of operation of the O.T.T. timer. MODE ENTER SLEEP A M 7:) ) O.T.T. TUNED STEREO AUTO SLEEP ECHO EQ. CLASSIC MANUAL ROCK POP VOL. s L E E P 9 ) EX.BASS DOWN UP MULTI CONTROL /VOLUME XD-980MD (En) 7 0 Knowledge sections Application section Basic section Preparation section Adjust the clock before setting the timer. Timer operation Select a program No. Set the ON/STANDBY key to STANDBY position. Adjust the listening volume. Make preparations for the play (recording). . For recording of broadcasts, the minimum volume is set automatically when the unit is switched on by the timer. Make preparations for recording. Cassette deck (option) MD ¤ Make timer setting of the component connected to the AUX or VIDEO jacks. Set a tape into. Cassette deck (option) Insert a disc. (Program playback is not possible.) The station should be preset prior to the above. . Select the disc (1, 2, 3) to be played. . Timer reservation is possible for the two types PROG.1 and PROG. 2 at the same time. . Please make reservations with an interval of at least one minute, so that the operation times of PROG. 1 and PROG. 2 do not overlap. Timer programming Two 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) are available. In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected to be activated or not as required. For tape timer operation, please read the operation manual of the cassette deck (option) carefully. 1 2 3 4 . The selected program No. lights. . If a program No. under which a timer program has already been reserved, it is replaced by the new timer program. 1 2 Each press of the key switches the program numbers as follows. 1 PROG.1..... Program 1 2 PROG.2..... Program 2 3 Normal operation The MD operates on the basis of the information read from the disk into memory. Before timer setting with the MD, leave the power ON for 10 min. or more to make the memory backup function effective. k Note Press during display of the program contents. Load a disc. To listen to CD Playing the auxiliary input source To listen to radio To listen to MD To listen to tape For recording Connect the related equipment under reference to “System connection”. 6 ENTER EX.BASS ON/STANDBY PROG. A M 1 ) ) ) 1 : DOWN UP MULTI CONTROL /VOLUME XD-980MD (En) 7 1 Preparation section Basic section Application section Knowledge sections Adjust the clock before setting the timer. Timer operation Make the desired reservation. Select the timer program No. to be used. Enter the OFF time. Enter the ON time. 2 1 1 PROG.1........ Execution of program 1 only. 2 PROG.2........ Execution of program 2 only. 3 PROG.1, 2... Execution of programs 1 and 2. 4 Timer OFF (2)Enter it. (1)Select the preset station No. (2)Enter it. 1 TUNER ...... Broadcasts 2 CD ............. CD 3 MD ............ MD 4 AUX........... External input (tape etc.) 2 1 . After entering the figure of “hour” with th...