valutazioni - 2, GPA: 3.5 ( )

Produttore : Kenwood File Size : 1.12 mb File Nome : Lingua di insegnamento:

To set the tape counter to “0000”, open the cassette holder once. Then the counter will be reset. TAPE 000 0 25Let's have sound 25Let's have sound CHANNEL SPACE setting (Except for the U.S.A., Canada, U.K., Europe, and Australia) The space between radio channels has been set to the one that prevails in the area to which the system is shipped. However, if the current channel space setting does not match the setting in the area where the system is to be used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by referring to the following table. 1 Select the TUNER input. 2 While holding the TUNER (BAND) key depressed, turn the MULTI CONTROL jog dial to select the system mode. MULTI CONTROL 1 “FM100/AM10 kHz” STEP, 2 “FM 50 /AM 9 kHz” STEP, Area CHANNEL SPACE freq. 1 USA, Canada and South American countries FM : 100 kHz AM : 10 kHz 2 Other countries FM : 50 kHz AM : 9 kHz FM100/AM10 FM 50/AM 9 . The “AM” display is variable depending on the model (country or area), and “MW” may be displayed in some areas. Basic section 26 Let's have sound 26 Let's have sound Receiving broadcast station Basic section1. Select the broadcast band. Collective presetting of stations (TUNING MODE) One-by-one presetting (ENTER) Each press changes the band. It is also possible to receive them by one-touch operations. 2. Selecting the tuning mode When the TUNER/BAND key is pressed, this unit will be switched on automatically and tuned to the last received frequency. 4. 1 TUNING . 1FM 2AM or 1FM 2MW (AM) 3LW .The broadcast bands defer depending on the model (country or area). When no stations have been memorized Auto tuning : Turn the MULTI CONTROL jog dial to receive the next tuned station automatically. (On the remote control unit, press the 1 or . key.) Manual tuning : Turn the MULTI CONTROL jog dial to select a frequency. (On the remote control unit, press the 1 or . key.) 3. Select a station. Each press alternates the mode. “Auto” (Auto tuning) “P.call” (Preset call) “Manual” (Manual tuning) . When no operation has been performed for 5 seconds while “P.call” is displayed, the tuning mode is set automatically to the Auto mode. 11 TUNING MODE 22 MULTI CONTROL 33 .. 33 22 11 BAND 27Let's have sound 27Let's have sound Collective presetting of stations (Auto memory) Keep the TUNING MODE key depressed (about 2 seconds). TUNING MODE (For U.K. and Europe) A.utoMemoAUTO ST. (Other countries) A.PresetAUTO ST. . Some stations may not be able to be preset if their reception conditions are weak. . A maximum of 30 stations are preset automatically by giving the priority to the FM band. . When there are many stations and the intended station has not been preset, please use “One-by-one presetting (manual preset)”. . The stations which have been preset are overwritten. Example when an FM station is received AUTO --FM 89.00 ST. . Use the manual tuning mode when reception is noisy due to weak reception. (In the manual mode, stereo broadcasts are received in monaural.) . Normally, use the “AUTO” (Auto tuning) mode. . If you are operating the remote control unit, the “AUTO” (Auto tuning) and manual tuning mode can be alternated by pressing the stop (7) key (Remote). One-by-one presetting (manual preset) 1 Press the ENTER key during reception. ENTER AUTO -FM-89.0 0 Presetting is cancelled when no operation is executed for 5 seconds or more. 2 Select one of the preset numbers from 1 to 30. MULTI CONTROL Presetting is cancelled when no operation is executed for 5 seconds or more. 3 Press the ENTER key again. ENTER . Repeat steps 123 to preset other stations. . If several stations are preset under the same number, the previous memory is replaced with the latest memory contents. Basic section When stations have been memorized (Preset call) Turn the MULTI CONTROL jog dial to select a station. (On the remote control unit, press the 4 or . key.) . When a key is held depressed, preset stations will be skipped at an interval of about 0.5 second. . Preset stations can also be recalled using the numeric keys of the remote control unit. Lights during auto tuning The “ ” indicator lights when a station is received AUTO 03FM 89.0 0 ST. Lights during stereo Frequency display reception 28 Let's record 28 Let's record NoteNoteNote Note that this cassette deck cannot record onto Recording on TAPE Metal tapes. 5533 44 22 11 Basic section 11 A 1. Load a cassette tape. (Recording is available on deck B only.) . Differentiation between normal 1 Open the cassette holder (TYPE ) and high (TYPE ) tape is of deck B. set automatically. PUSH 2 Insert a tape. OPEN . Remove tape slack before load 3 Close the door. ing. 2. Select the tape transport direction. 22 To reverse the transport direction 1 Select deck B by pressing the TAPE B key. 2 Press the TAPE B key so that the desired direction indicator appears.™ ...

Scarica la tua

Per scaricare, digitare 2 cifre :