valutazioni - 0, GPA: 5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
This is achieved with an intelligent, built-in feedback logic design, a matrix surround decoding and the decoding of stereo, full bandwidth surround outputs. The Pro Logic II modes programmed into this model are “Movie”, “Music”, “Game” and “Pro Logic”. Especiially in "Game" mode, base sound not only from Front and Center but also from Surround channel is added to Subwoofer. This provides even more dynamic surround effects. DTS DTS has volume of data more than the Dolby Digital, and can reproduce the surround of high sound quality or more. DVD that adhere the mark can be reproduced. They are the same as the Dolby Digital 5.1 channels but it is a format that lowered the audio compression rate when recording digitally though. Because of that, high S/N with the thickness of the sound can be reproduced. Moreover, an exact, magnificent surround sound of wide a dynamic range and excelling in Separation is a feature of DTS. DTS has a “.1” or “LFE” channel. The indication “LFE” appears in the surround indicator when a signal is being input for this channel. (See page 14.) Selecting the listening mode SOUND SELECTOR ENTER MULTI CONTROL LISTEN MODE SET MULTI CONTROLC-AX7 (AX-7 system) 1Start playing the video software. 2Select the "LISTEN MODE". Main unit: 1 Press the [SOUND SELECTOR] key of C-AX7, turn the [MULTI CONTROL] knob to select "SURROUND". Then press the [SET] key. Switching as shown below is done each time the knob is turned. SURROUND D-BASS TONE 2 Turn the [MULTI CONTROL] knob to select "LISTEN MODE". Then press the [SET] key. Switching as shown below is done each time the knob is turned. V.F.S. CLEAR VOICE LISTEN MODE Remote control unit: Press the [LISTEN MODE] key. ENGLISH Continued to next page EN 13 Surround play ENGLISH 3 Press the MULTI CONTROL [%/fi] keys on the remote contorl to select the listening mode. Then press the [ENTER] key. • Only "Stereo (EQ)" is displayed when "FRONT SYSTEM" is selected with the speaker settings. (See page 11.) • The items "D-BASS" and "TONE" can be selected only when the "V.F.S.", "CLEAR VOICE", or "Stereo (EQ)" is selected, when the "5.1CH SYSTEM" is selected with the speaker settings. (See page 11) The mode switches as below according to the input source. When the Dolby Digital signal is input: Character information display Listening mode Indicator "Dolby D" Dolby Digital "Dolby Digital" "PL II Movie" Pro Logic II Movie "Dolby Digital" "PL II" "PL II Music" Pro Logic II Music "Dolby Digital" "PL II" "PL II Game" Pro Logic II Game "Dolby Digital" "PL II" "Pro Logic" Pro Logic "Dolby Digital" "PL" "Stereo" Stereo "Dolby Digital" "Stereo (EQ)" Stereo (EQ ON) "Dolby Digital" When you select Dolby Digital When the DTS signal is input: Character information display Listening mode Indicator "DTS" DTS "DTS" "Stereo" Stereo "DTS" "Stereo (EQ)" Stereo (EQ ON) "DTS" When you select DTS When the analog signal or the digital signal --except for Dolby Digital or DTS signal-- is input: Character information display Listening mode Indicator "Stereo" Stereo –– "Stereo (EQ)" Stereo (EQ ON) –– "PL II Movie"* Pro Logic II Movie "PL II" "PL II Music"* Pro Logic II Music "PL II" "PL II Game"* Pro Logic II Game "PL II" "Pro Logic"* Pro Logic "PL" * It can not be selected when the sampling frequency is 96 kHz signal. When you select Stereo • Dolby Digital or DTS signal having more channels than the maximum number of playback channels available using this model’s current settings is input, downmixing is performed to match the number of available channels. Surround indicator The surround indicator of C-AX7 lights according to the number of signal channels recorded in the selected sources. C-AX7 (AX-7 system) Surround indicator Front left Front right Center LFE *1 Surround left Surround right Surround *2 *1 LFE= Low Frequency Effects. This channel delivers separate non-directional bass signals to the subwoofer for more dynamic deep bass sound effects. *2 The "S" indicator lights when the surround component consists of a single channel. “DTS” and "DTS Digital Surround" are registered trademarks of DTS, Inc. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double -D symbol are trademarks of Dolby Laboratories. 14EN Troubleshooting Troubles are not always due to malfunction or failure of the system. In case of a trouble, check the following tales before calling for service. Symptom Remedy The power does not become ON or channel switching is not possible. • Insert the system control cord securely all the way. Channel switching is not possible when the CHANNEL SELECTOR key is pressed. • This key does not work when Dolby Digital or DTS signal are input when selecting "5.1CH SYSTEM" of the "SPEAKER MODE" setting. The standby indicator blinks in red and no audio is output. • A speaker cord is short-circuited. Turn the power off and reconnect the speaker cord. • There may be an internal defect. Switch it OFF, unplug the power cord and call for service. ENGLISH Care and ...