valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
– To avoid magnetic interference, do not position the front speakers too close to your TV. Helpful Hint: For optimal enjoyment of your Gaming Experience, it is advisable that you avoid connecting the TV’s AUDIO OUT to the audio system’s AUX IN (R/L) terminals. If you wish to listen to your favorite movies/TV programmes through the Philips Mini System, please disconnect the Game Console connection on the front of the set to avoid experiencing any unwanted noise. English 11 Connections English Step 5: Connecting the AC power cord "AUTO INSTALL -PRESS PLAY" may appear on the display panel when the AC power cord is plugged into the power outlet for the first time. Press EA on the main unit to store all available radio stations (page 3 – P3) or press C to exit (refer to “Tuner Operations”). Step 6: Inserting batteries into the remote control 1 3 2 1 Open the batter y compar tment cover. 2 Inser t two batteries type R06 or AA, following the indications (+-) inside the compar tment. 3 Close the cover. Using the remote control to operate the system 1 Aim the remote control directly at the remote sensor (iR) on the main unit. 2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER). 3 Then select the desired function (for example EA, i , e ). CAUTION! – Remove batteries if they are exhausted or will not be used for a long time. – Do not use old and new or different types of batteries in combination. – Batteries contain chemical substances, so they should be disposed of properly. 12 Gameport Operations About Gameport Gameport allows you to connect your game console to this mini system which enables you to enjoy a total game immersion experience by having powerful sound output. Preparation before use Game console front panel rear panel SPEED PUN CH BLAST MODEMODE MIX-IT GAME SOUNDGAME SOUND GAMEVOLUME GAMEGAME•AUXAUX 2 5 6 7 3 AUDIOL. VIDEO AUDIOR. 1 1 Connect your game console’s video and audio output to the GAMEPORT video and audio inputs respectively (refer to “Connections – Connecting to game console). 2 Connect your TV’s video input to the VIDEO OUT (CVBS) on the rear panel. 3 Connect all the AC power cord to the power outlet. Start operating 4 Turn on the TV and set to the correct video-in channel. The TV’s video input channel may be called AUX(iliary) IN,AUDIO/VIDEO (A/V) IN, EXT 1, etc. These channels are often near channel 00 on your TV. Or, your TV remote control may have a button or switch that chooses different video modes. See your TV manual for details. 5 Press AUX•GAME until “GAMEPORT” is displayed. 6 Press MODE (or GAME SOUND on remote) to select the type of sound setting that best suit the game : SPEED, PUNCH, BLAST or OFF. 7 If you like to mix your game sound to your favourite music, press MIX-IT to select the desired music source : CD,TUNER, USB PC LINK,AUX or OFF. CD ™ “MIX-CD" TUNER ™ “MIX-TU" USB PC LINK ™ “MIX-USB" AUX ™ “MIX-AUX" OFF ™ “MIX-OFF" 8 If necessary, start playback your chosen mixer source. 9 Start playing your favourite game. To adjust the game console’s volume level . Adjust GAME VOLUME. To change the mixer source . Press MIX-IT. To control the current active mixer source . Press the respective source button (for example, CD,TUNER) on the remote control, then select the desired function (for example E, i, e). For example, if CD is the mixer source and to change the disc tray, you have to press CD, then press CD 1~5 to select the desired disc tray. Notes: – You can only activate GAME VOLUME and MIX-IT while in game source mode. – If your game console is switched on, the video image will always appear on the TV even though you are not in the gameport mode. English 13 USB PC Link English Quick Setup Guide PC system requirement – Windows 98 (SE)/ ME / 2000 / XP – Intel Pentium MMX200 or higher – CD-ROM drive – USB por t – Free hard disk space : 15 MB for the software Install MusicMatch software POWER ON/OFF 1 2 3 5 4 1 Use the supplied USB cable to connect the audio system to your personal computer’s USB por t. 2 Press USB PC LINK. 3 Turn on the PC and inser t the USB PC LINK installer disc (which comes with this product) onto the PC’s CD-ROM drive. This application software can also be downloaded from “IMPORTANT! Please use this customised MusicMatch software for your USB PC Link application. Remember to un-install all other MusicMatch jukebox software first from your PC system (if available). 4 The installation guide will appear automatically. If it does not, go to the CD-ROM drive in Windows Explorer and double click on the “USBPCLINK.exe”. Then perform the following steps: – First, select your desired language from the list. – Then, select “installer driver” and follow by “installer MusicMatch jukebox”. – Select other options (Tutorial, Free goodies, FAQ). Note: – You are advised to read the MusicMatch tutorial before using it for the first time. Make sure the mute function on the P...