valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
26 Specifications AMPLIFIER Output power .......................... 500W+500W MPO ................................................................. 2 x 250 W RMS(1) Signal-to-noise ratio .......................... . 62 dBA (IEC) Frequency response ........ 63 – 16000 Hz, .–3 dB Input sensitivity AUX In ................................................................................... 640 m V Gamepor t .............................................................................. 640 mV Output Speakers ..................................................................................... . 8 . Headphones ........................................................ 32 . – 1000 . (1)(8 ., 60Hz - 12.5 kHz, 10% THD) DISC PLAYER Programmable tracks .................................................... 99 Frequency response ........... 50 – 18000 Hz, –3 dB Signal-to-noise ratio ........................................ . 62 dBA Channel separation .......................... . 35 dB (1 kHz) MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO MP3-CD bit rate ....................................... 32-256 kbps .................................................................... (128 kbps advised) Sampling frequencies ....................... 32, 44.1, 48 kHz USB Frequency response ...... 50 – 18000 Hz, . ±3 dB Signal-to-noise ratio .......................................... . 62 dBA Channel separation .............................. . 35 dB (1 kHz) Total harmonic distor tion ............... < 0.3% (1 kHz) TUNER FM wave range ................................... 87.5 – 108 MHz MW wave range ................................ 531 – 1602 kHz Number of presets ........................................................ 40 Antenna FM ......................................................................................... 75 . wire MW .............................................................................. Loop antenna SPEAKERS System ................................................... 3 way, Bass reflex Impedance ......................................................................... 8 . Woofer ...................................................................... 1 x 6.5" Tweeter ................................. 1 x 2" Ferro fluid cooled Dimensions (w x h x d) .. 348 x 322 x 245(mm) Weight ............................................................. 4.35 kg each GENERAL Material/finish ................................... Polystyrene/Metal AC Power ..................................... 220 – 230 V / 50 Hz Power Consumption Active ........................................................................................ 130 W Standby .................................................................................. < 25 W Eco Power Standby ............................................................. < 1 W Dimensions (w x h x d) . 265 x 322 x 390 (mm) Weight (without speakers) ................................. 8.6 kg Specifications and external appearance are subject to change without notice. English 27 Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Auto Installation of the Installer CD-ROM did not install the Philips Sound Agent 2 onto my PC. When in USB PC LINK mode, “NO CONNECTION” is displayed. I want the minimum effect from the Philips Sound Agent 2 sound mode when listening to MP3 music streaming via USB PC Link. Radio reception is poor. “NO DISC” is displayed or the disc cannot be played. The system does not react when buttons are pressed. Sound cannot be heard or is of poor quality. .Check that your PC’s Operating System is running on Windows 2000/XP. .Check the connection between your PC and the system and the inital setup required, see “Connections” and “USB PC Link”. .Make sure the connected PC is turned on. .Select the PRESET - Neutral mode. .Select the REVERB - No environment mode. .If the signal is too weak, adjust the antenna or connect an external antenna for better reception. .Increase the distance between the system and your TV or VCR. .Inser t a disc. .Load in the disc with label facing right. .Replace or clean the disc, see “Care and safety information”. .Use a finalised CD-R(W) or a correct format disc. .Remove and reconnect the AC power cord and switch on the system again. .Adjust the volume. .Disconnect the headphones. .Check that the speakers are connected correctly. .Check that the AC power cord is connected properly. .When in USB PC LINK mode, check that the PC’s volume is not put into mute. .When playing CD from PC’s CD drive, refer to “USB PC Link - Enable digital CD audio output“. Problem Solution Refer to the FAQ (Frequently Asked Questions) on the supplied CD-R...