valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
26 EN 8 Adjust volume level and sound effect Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Select a sound effect Note • You cannot use different sound effects at the same time. Select a preset sound effect 1 During play, press DSC repeatedly to select: • [ROCK] (rock) • [JAZZ] (jazz) • [POP] (pop) • [CL ASSIC] (classic) • [FLAT] (flat) Enhance bass 1 To turn on bass enhancement, press LOUDNESS/DBB repeatedly during play until the DBB logo is displayed. • To turn off bass enhancement, press LOUDNESS/DBB repeatedly until the DBB logo disappears. Select automatic loudness control Automatic loudness control increases the treble and bass effect at low volume levels (the higher the volume, the lower the treble and bass levels). 1 To turn on automatic loudness control, press LOUDNESS/DBB during play until the loudness icon is displayed. • To turn off automatic loudness control, press LOUDNESS/DBB until the loudness icon disappears. Mute sound 1 During play, press MUTE to mute/unmute sound. Listen through headphone 1 Plug a headphone into the socket on the unit. English EN 27 9 Other features Activate demonstration mode You can see an over view of all features. 1 In the standby mode with clock display (if set), press on the main unit to activate the demonstration mode. » A demonstration of major available features star ts. To deactivate the demonstration mode: 1 Press on the main unit again. Adjust brightness of display panel 1 In standby mode, press MODE/DIM repeatedly to select different levels of brightness for the display panel. Set the alarm timer 1 Ensure that you have set the clock correctly. 2 In standby mode, press and hold SLEEP/ TIMER. » The hour digits are displayed and begin to blink. 3 Press + VOL - to set the hour, then press SLEEP/TIMER again. » The minute digits are displayed and begin to blink. 4 Press + VOL - to set the minute. 5 Press SLEEP/TIMER to confirm. » [OFF] (off) begins to blink. 6 To activate the wake-up timer, press + VOL - to select [ON] (on) while [OFF] (off ) is blinking. » A clock icon appears on the display. » The unit turns on automatically at the set time and switches to the last selected source. » To deactivate the alarm timer, select [OFF] (off) at step 6. Set the sleep timer 1 When the unit is turned on, press SLEEP/ TIMER repeatedly to select a set period of time (in minutes). » The unit turns off automatically after the set period of time. Connect other devices Listen to an audio player You can listen to audio player with red/white audio output sockets through this unit. 1 Connect a red/white audio cable (not supplied) to the AUX IN L/R sockets and to the audio output sockets on the audio player. 2 Select the AUX source. 3 Star t play on the audio player. 28 EN Record to a digital recorder You can record audio from this unit to a digital recorder. 1 Connect a coaxial cable (not supplied) to: • the COAXIAL socket • the digital input socket on the digital recorder 2 Play audio to be recorded. 3 Begin to record on the digital recorder (see the digital recorder user manual). English EN 29 10 Product information Note • Product information is subject to change without prior notice. Specifi cations Amplifi er Rated Output Power 2X50W RMS Frequency Response 20 -20000 Hz, ±3dB Signal to Noise Ratio >65dB Aux Input 500 mV RMS 20kohm Disc Laser Type Semiconductor Disc Diameter 12cm/8cm Video Decoding MPEG-1 / MPEG-2 / DivX Video DAC 12Bits Signal System PAL / NTSC Video Format 4:3 / 16:9 Video S/N >48dB Audio DAC 24Bits / 96kHz Total Harmonic <1% (1 kHz) Distor tion Frequency 4Hz - 20kHz (44.1kHz) Response 4Hz - 22kHz (48kHz) 4Hz - 24kHz (96kHz) S/N Ratio >65dBA Tuner (FM) Tuning Range 87.5 - 108MHz Tuning grid 50KHz 30 EN Sensitivity - Mono, 26dB <22 dBf S/N Ratio Sensitivity - Stereo, 46dB >43 dBf S/N Ratio Search Selectivity >28dBf Total Harmonic <3% Distor tion Signal to Noise Ratio >55dB Speakers Speaker Impedance 2X4ohm Speaker Driver, Base 5” Speaker Driver, 0.2” Tweeter Sensitivity >80dB/m/W±4dB/ m/W General information AC power 220 - 230 V, 50 Hz Operation Power 52W Consumption Eco Standby Power <1W Consumption Standby Power <4W Consumption Composite Video 1.0Vp-p, 75ohm Output Coaxial Output 0.5Vpp ± 0.1Vpp 75ohm Headphone Output 2X15mW 32ohm USB Direct Version 2.0 Dimensions - Main Unit (W x H x D)248 x 110 x 307mm - Speaker Box (W x H x D) 170 x 270 x 220 mm Weight -With Packing11 kg - Main Unit2 kg - Speaker Box 2 x 2.8 kg Supported disc formats • Digital Video Discs (DVDs) • Video CDs (VCDs) • Super Video CDs (SVCDs) • Digital Video Discs + Rewritable (DVD+RW ) • Compact Discs (CDs) • Picture (Kodak, JPEG) files on CDR( W) • DivX(R) disc on CD-R(W ): • DivX 3.11, 4.x and 5.x • WMA Supported MP3-CD formats: • ISO 9660 • Max. title/album name: 12 characters • Max. title number plus album: 255. • Max. nested director y: 8 levels. • Max. album number: 32. • Max. MP3 track number: 999. • Suppor ted sampling frequencies for MP3 disc:...