valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
• To scroll through the menu, press / . • To confirm a selection, press to confirm. » If no key is pressed for more than 10 seconds after pressing the button MENU, acts back as the play/pause key. EN 7 Listen to radio Listen to Digital Audio Broadcasts (DAB) Digital Audio Broadcasting (DAB), is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality, and more information. For the first time when DAB mode is switched on. 1 Press SOURCEon the main unit repeatedly to select DAB. » The system per forms auto search. » All the available DAB stations are stored. » The radio tunes to the first available station Tip • The display shows a rectangle. The position of the rectangle indicates the degree of signal streng th. ( The fur ther towards the right, the greater the signal streng th.) • If there is no DAB coverage currently available, or DAB signal is too weak in your area, no DAB station is found, and message [Ser vice not available] scrolls. Tune to DAB radio station manually 1 In DAB mode, press / repeatedly until your desired station name displays. 2 Press ENTER to confirm the selection. » The radio immediately tunes to the selected station. • About station display symbols You probably see some symbols displayed before the station names as follows: • H: Indicates that the station is one of 10 most-listened stations by you based on DAB radio’s monitoring. • ?: Indicates that the station is not currently available, or not active. • : Indicates that the station is a primar y station with secondar y service. • : Indicates that the station is a secondar y station. Program DAB radio stations manually You can program a maximum of 30 preset DAB radio stations. 1 Tune to a DAB station. 2 Press PROG on the remote control to activate programming. 3 Press / on the remote control to allocate a number (1-30) for the preset. 4 Press PROG to confirm. Note • If a DAB station is already stored under a preset location, new DAB station assigned to this location will over write the old DAB station. • DAB station presets will not over write FM presets. Scan for new DAB stations New stations and ser vices will be regularly added in the DAB broadcast. To make new DAB stations and ser vice available on your DAB radio, a search is needed. 1 In DAB mode, press SCAN. » The unit star ts to scan for DAB stations. Listen to a preset DAB radio station 1 Press / to select a preset number on the main unit. EN 17 English Display DAB information On the display of DAB broadcasting, the first line shows station name, and the second line shows the ser vice information for the current station. Seven types of ser vice information are available. 1 Press RDS/DISPLAY repeatedly to cycle through the display information (if available). » Dynamic label segment (DLS) » Program type (PT Y ) » Ensemble Name » Time » Channel and frequency » Bit rate and audio status » Signal error rate Use DAB menu 1 In the DAB mode, press MENU to enter the DAB menu. » The first setup option [Station list] displays. 2 Press / to scroll the menu options: • [Station list] • [Full scan] • [Manual tune] • [DRC] • [Prune] • [System] 3 To select an option, press ENTER. 4 Repeat step 2-3 if sub-option is available under one option. Full scan Full scan is used to per form a wide range of DAB radio search. 1 In the DAB mode, press MENU to enter the menu options. 2 Press / repeatedly until [Full scan] displays. 3 Press to confirm the selection. » Full scan star ts automatically. 18 EN Manual tune With this feature, you can tune to a specific channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. 1 In DAB mode, press MENU to display the [Manual tune] option. 2 Press ENTER to confirm the selection. » The display shows a channel and its frequency. 3 Press / repeatedly until the desired channel/frequency appears. 4 Press ENTER to confirm the selection. Tip • You can press RDS/DISPLAY to change the ser vice information on the display. • You can adjust the position of the antenna to obtain the optimal signal strength. Dynamic Range Control (DRC) DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations. There are three levels of compensation: • [DRC Off]: No compensation applied. (the default) • [DRC Low]: Maximum compensation applied. • [DRC High]: Medium compensation applied. 1 In DAB mode, press MENU to enter the menu options. 2 Press / repeatedly until [DRC] displays. 3 Press ENTER to enter the sub-menu. » The current DRC level displays on the first line. 4 Press / to select a DRC value » [DRC Off], [DRC Low] and [DRC High] displays on the second line. 5 Press to confirm the selection. » You should be able to hear the difference in compression immediately. Note • The best way to determine which of these DRC value settings suits you best is to experiment with them on vario...