Log:
valutazioni - , GPA: ( )

Istruzioni per l'uso Philips, Modello MCD297/12

Produttore : Philips
File Size : 1.34 mb
File Nome :

Lingua di insegnamento: en

Il documento viene caricato, si prega di attendere
Il documento viene caricato, si prega di attendere

Facilità d'uso


If the language selected is not available on the disc, the language set by default will be used instead. But the menu language of the DVD Micro System cannot be changed once selected. LATIN 1 In stop mode or during playback, press SYSTEM MENU. 2 Press 22/33/5/4 on the remote control to select your preferred option. . Move to LANGUAGE SETUP and press 4. . Move to one of the following and press 33. OSD LANGUAGE (On-Screen Display) Switches the display language on the TV screen. Select the language from the displayed list. AUDIO LANG (DVD only) Switches the display language of the sound track. Select the language from the displayed list. SUBTITLE LANG (DVD only) Switches the display language of the subtitle. Select the language from the displayed list. MENU LANG (DVD only) Select the language for the DVD menu. When the selected language is not recorded in the DVD, one of the recorded languages will be selected automatically (except for OSD). You can reset all the DVD settings except for Rating. If the language selected is not available on the disc, the original language designated by each disc will be selected. 3 Press 5/4 to select a language and press OK. 4 Repeat steps 2~3 for other settings. To exit the menu Press SYSTEM MENU again. English 21 Basic Functions English Switching the system on . Press ECO POWER/STANDBY-ON B on the front panel. . The system will switch to the last selected source. . Press SOURCE repeatedly (or DISC, TUNER, TAPE or USB/AUX on the remote). . The system will switch to the selected source. Switching the system to Eco Power Standby mode . Press ECO POWER/STANDBY-ON B (or B on the remote) in the active mode. . The system enters Eco power standby (the ECO POWER LED is on) or normal standby with clock display. . The volume level (up to a maximum volume level of 12), interactive sound settings, last selected mode, source and tuner presets will be retained in the player's memor y. . If the system is normal standby with clock display, press and hold ECO POWER/STANDBYON B on the front panel for 3 seconds or more to switch to Eco power standby or vice ver sa. Power-saving automatic standby As a power-saving feature, the system will automatically switch to Standby mode if you do not press any buttons within 15 minutes after a disc has stopped playing. Sound Control DBB, DSC and LOUDNESS sound features cannot be activated at the same time. DBB (Dynamic Bass Boost) DBB enhances the bass response. . Press LOUDNESS/DBB on the front panel or press LOUD/DBB on the remote to enable/ disable DBB feature. . Some discs might be recorded in high modulation, which causes a distor tion at high volume. If this occurs, switch off DBB or reduce the volume. DSC (Digital Sound Control) DSC provides a different type of preset sound equalizer setting. . Press DSC repeatedly to select: CLASSIC, JAZZ, POP or ROCK. LOUDNESS LOUDNESS feature enables the system to automatically increase the treble and bass sound effect at low volume (the higher the volume, the lower the treble and bass increase). . Press LOUDNESS/DBB on the front panel or press LOUD/DBB on the remote to enable/ disable LOUDNESS feature. . icon appears/disappears after this feature is enabled/disabled. Volume control Turn the VOLUME -/+ control on the front panel clockwise or anticlockwise or press VOL +/-on the remote to increase or decrease the volume level. . ”VOL XX” is displayed on the display panel. “XX” denotes the volume level. To listen through the headphone . Connect the headphone plug to the n socket on the front panel of the DVD player. . The speakers will be muted. To switch off the volume temporarily . Press MUTE on the remote. . Playback will continue without sound and “MUTE” appears. . To activate sound reproduction, you can: – press MUTE again; – adjust the volume controls; – change source. 22 Disc Operations IMPORTANT! – This system is designed for regular discs.Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism. – Do not move the system during playback. Doing so may damage the system. –DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player. – According to the format requirement of DVD or VCD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. – If “INVALID KEY” appears on the TV screen when a button is pressed, it means the function is not available on the current disc at the current time. Playing discs 1 Connect the power cords of the system and TV (or any optional stereo or AV receiver) to a power outlet. 2 Turn on the TV power and set to the correct Video In channel. (See "Setting up the TV".) 3 Press ECO POWER/STANDBY-ON 2 on the DVD Player front panel. . You should see the blue Philips DVD backgro...

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie