valutazioni - 2, GPA: 2.5
(
)
)
|
Facilità d'uso
If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape. IMPORTANT! Recording is permissible if copyright or other rights of third parties are not infringed upon. 33 Tape Operation/Recording English Preparation for recording 1 Select TAPE source. 2 Load a recordable tape into the tape deck with the full spool to the left. 3 Prepare the source to be recorded. DISC – load the disc. TUNER – tune to the desired radio station. AUX – connect external equipment. When recording is in progress . To stop recording, press 9 (STOP9 on the remote). . It is not possible to activate the timer function. Synchro start CD recording (for CD only) 1 Select DISC source. . You can programme the tracks in the order you want them to be recorded (refer to “Disc Operations - Programming favorite tracks”). 2 Press RECORD to start recording. . Playing of the disc programme starts automatically. It is not necessary to star t the DVD player separately. One touch recording 1 Select DISC, TUNER or AUX source. 2 If necessar y, star t playback of the selected source. 3 Press RECORD to start recording. Recording timer To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time. 1 Select the preset radio station to record from (refer to “Radio Reception - Tuning to preset radio stations”). 2 In standby mode, press TIMER SET3 (TIMER on the remote) for more than two seconds. . “SELECT SOURCE” scrolls. 3 Press SOURCE repeatedly to select TUNER REC. 4 Press TIMER SET3 (TIMER on the remote) to confirm the source. . “SET ON TIME” is displayed and the clock digits for the hours flash. 5 Press TUNING S/T to set the hours. 6 Press TIMER SET3 (TIMER on the remote) again. . The clock digits for the minutes flash. 7 Press TUNING S/T to set the minutes. 8 Press TIMER SET3 (TIMER on the remote) to confirm the recording star t time. . “SET OFF TIME” is displayed and the clock digits for the hours flash. 9 Repeat steps 5-7 to set the finish time. 0 Press TIMER SET3 (TIMER on the remote) to confirm the timer settings. . is shown and the recording timer is now set. Note: – The recording timer will not be activated if the system is in tape play mode. 34 Clock/Timer English DSCIS /PROG/PROG RDS CLOCK SETBAND STANDBY-ON ECO POWER RECORD DISPLAY VOLUME MCD510 MICR O SY STEM INCREDIBLE SURROUND PROGRAM TUNINGALBUM / PRESET SOURCE TIMER SET DBBDSC iR Clock setting See page 20. Timer setting . The system can be used as an alarm clock, whereby the CD,TUNER orTAPE is switched on at a set time (one time operation).The clock time needs to be set first before the timer can be used. 1 In standby mode, press and hold TIMER SET3 (TIMER on the remote) for more than two seconds. . “SELECT SOURCE” scrolls followed by the last selected source. 2 Press SOURCE to select your desired source and press TIMER SET3 (TIMER on the remote) to confirm. . “SET ON TIME” scrolls followed by “ON 0 : 00”. 3 Press TUNING S/T to set the hours and press TIMER SET to confirm. 4 Press TUNING S/T to set the minutes and press TIMER SET to complete the setting. . The timer is now set and activated. Activating and deactivating timer . In standby or during playback, press TIMER SET3 (TIMER on the remote) once. . Display shows if activated, and disappears if deactivated. Sleep timer setting The sleep timer enables the system to switch off by itself after a set period of time. 1 Press SLEEP on the remote control repeatedly to select a preset time. . The selections are as follows (time in minutes): 90 ™ 80 ™ 70 ™ 60 ™ 50 ™ 40 ™ 30 ™ 20 ™ 10 ™ OFF . "SLEEP XX" or "OFF" is displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP button. To deactivate the sleep timer . Press SLEEP repeatedly until "OFF" is displayed, or press ECO POWER/STANDBY-ON y. 35 Specifications English AMPLIFIER Output power .................................... 2 x 25 W RMS* ...................................................................... 2 x 50 W MPO Signal-to-noise ratio ....................................... . 62 dBA Frequency response ......... 63 – 16000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ......................................... 6 . Impedance headphones ........................................ 32 . DVD PLAYER Laser Type ................................................ Semiconductor Disc Diameter .............................................. 12cm / 8cm Video Decoding ........................... MPEG-2 / MPEG-1 Video DAC ................................................................ 10 Bits Signal System ............................................... PAL / NTSC Video Format ..................................................... 4:3 / 16:9 Video S/N ........................................... 56 dB (minimum) Composite Video Output ................ 1.0 Vp-p, 75 . S-Video Output ............................. Y - 1.0 V...