Log:
valutazioni - 0, GPA: 0 ( )

Istruzioni per l'uso Philips, Modello FW-C10/22

Produttore : Philips
File Size : 883.76 kb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3 Press a or a for more than one second, then release. ™ The display will show “ SEARCH” until a radio station with sufficient signal strength is found. 3/7/00, 5:05 PM • Repeat this procedure until the desired station is reached. • To tune to a weak station, briefly press a or a repeatedly until the display shows the desired frequency and/or when the best reception has been obtained. Storing Preset Stations You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (BAND). 2 Press PROGRAM for more than one second. ™ The PROG flag starts flashing and “ AUTO” will be displayed. 3139 116 19311 TUNER TAPE ™ The system will search for every available station in the FM waveband first, MW and then search the LW waveband. ™ All available stations will be stored automatically. The frequency and preset number will be displayed briefly. ™ The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. ™ The system will remain tuned to the last stored preset radio station. Notes: – You can cancel the automatic programming by pressingPROGRAMor C(on the system only). – If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed. Manual programming 1 Press TUNER (BAND). 2 Press TUNER (BAND) to select the desired waveband : FM, MW or LW. 3 Press PROGRAM for less than one second. ™ The PROG flag starts flashing. ™ The next available preset number will be displayed for selection. pg 01-22/C10/22-Eng 15 4 Press a or a to tune to the desired frequency. • If you wish to store the radio station to another preset number, press 4 or 3 to select the desired preset number. 5 Press PROGRAM again. ™ The PROG flag disappears and the radio station will be stored. • Repeat steps 3– 5to store other preset radio stations. Notes: – When 40 radio stations are stored and you attempt to store another radio station, the display will show " PROGRAM FULL” . If you want to change an existing preset number, repeat steps 3– 5. – You can cancel manual programming by pressingC(on the system only). – During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. Tuning to Preset Radio Stations • Press 4 or 3 to select the desired preset number. ™ The preset number, radio frequency, and waveband appear on the display. English STANDB - • TAPE 2TAPE 1 PLAY . RECORD PLAY STOP. OPEN PAUSE FW- C10 MINI HIFI SYSTEM CD1 • 2 • 3 BAND TAPE 1 • 2 TAPECD TUNER AUX PRESET TUNING STOP• CLEARSEARCH PLAY• PAUSE PREV NEXT DBB VIDEO OPTIMAL JAZZ ROCK TECHNO DSC MASTER VOLUME Loading a tape 1 Press STOP• OPEN. 2 The tape deck door opens. 3 Load the tape with the open side downward and the full spool to the left. 4 Close the tape deck door. 15 3139 116 19311 3/7/00, 5:05 PM English TAPE Tape Playback 1 Press TAPE to select TAPE mode. ™ " TAPE" will be displayed. 2 Load the tape into the selected tape deck. 3 Press PLAYE to start playback. • To interrupt playback, press PAUSE. • To resume playback, press PAUSE again. 4 Press STOP• OPEN to end playback. Rewind/Fast Forward When playback is stopped 1 You can rewind or fast forward a tape by pressing a or a , respectively. ™ The tape will stop automatically at the end of rewinding or fast forwarding. 2 Press STOP• OPEN to stop rewinding or fast forwarding. 16 pg 01-22/C10/22-Eng 16 Continuous Playback From Tape Deck 2 to Tape Deck 1 1 Press TAPE to select TAPE mode. 2 Load the tapes in tape deck 1 and 2. 3 Press PLAY 2 on tape deck 2. 4 Press PAUSE on tape deck 1. 5 Press PLAY 2 on tape deck 1. ™ Playback will begin with tape deck 2 and will continue with tape deck 1 when playback on tape deck 2 ends. 6 Press STOP• OPEN if you want to stop playback before the end of the tape in tape deck 1 or tape deck 2. Notes: – During rewinding or fast forwarding of a tape, it is also possible to listen to another source (e.g. CD, TUNER or AUX). – Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism. – C-120 tape is extremely thin and is easily deformed or damaged. It is not recommended for use in this system. – Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV or speaker). . AUX ST - • FW- C10 MINI HIFI SYSTEM CD1 • 2 • 3 BAND TAPE 1 • 2 TAP E C D TUNER AUX PRESET TUNING STOP• CLEARSEARCH PLAY• PAUSE PREV NEXT DBB VIDEO OPTIMAL JAZZ ROCK TECHNO DSC Selecting External Equipment If you have connected the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals, you can ...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie