valutazioni - 1, GPA: 3
(
)
)
|
Facilità d'uso
• Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring- wound watches away from the player to prevent possible damage from the magnet. • When carrying the player, do not hold the lid of the CD compartment. If you do so, the lid may open so that you may drop the player. On operation • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate. • If the player has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. continued Additional Information Precautions (continued) Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. • Do not stick paper or sticker on the CD, nor scratch the surface of the CD. • After playing, store the CD in its case. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error. Notes on cassettes • Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape. Side A Tab for side B Tab for side A • To record on a tape with its tab broken off, cover the respective tab hole for side A or B with adhesive tape. • The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. Additional Information Troubleshooting Symptom Remedy There is no audio. • Press POWER to turn on the player. • Connect the AC power cord to a wall outlet securely. General• Connect the power cord to the POWER IN of the player (page 26). • Connect the audio connecting cord correctly (page 27.) • Adjust the volume. • Unplug the headphones when listening through speakers. “no disc“ lights in the display even when a CD is in place. • Insert the CD with the label surface up. The CD does not play. • Make sure that the CD compartment is closed. • Place the CD with the label surface up. • Clean the CD. CD Player• Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. • Press pon the CD section to switch the function of the player to “Cd”. The sound drops out. • Reduce the volume. • Clean the CD, or replace it if the CD is badly damaged • Place the player in a location free from vibration. The audio is weak or has poor quality. • Move the player away from the TV. • If you are using the remote while listening to AM radio, noise may be heard. This is unavoidable. Radio The audio is not stereo. • Press PLAY MODE/MONO/ST/ISS on the player until “STEREO” appears. The picture of your TV becomes • If you are listening to an FM program near the unstable. TV with an indoor antenna, move the player away from the TV. continued Additional Information Troubleshooting (continued) Symptom Remedy The tape does not move when you press an operation button. • Close the cassette compartment securely. The r/Pbutton does not function/The tape does not play. • Make sure the safety tab on the cassette is in place. • Press pon the TAPE section to switch the function of the player to “TAPE”. The tape does not erase completely. • Clean the erasing heads (see page 38.) The tape does not record. • Make sure the tape is inserted properly. • Make sure the safety tab of the cassette is in place. The audio is weak/The audio quality is poor. • Clean the heads, pinch rollers and capstans (See page 38). • Demagnetize the heads using a demagnetizer (see page 38). The tape player cannot be paused during playback. • The tape player can be paused during recording only. The sound is distorted. • The TYPE II (high position) or TYPE IV (metal) tape is being used. Use TYPE I (normal) tape only. The timer does not operate. • Make sure the time on the clock is correct. • Check to see if the AC power had been cut off. • Make sure the tape has not wound to the end. • Make sure the t(clock) indication is displayed. Timer Tape Player Additional Information Symptom Remedy Remote The remote does not function. • Replace all the batteries in the remote with new ones if they are weak. • Make sure that you are pointing the remote at the remote sensor on the player. • Remove any obstacles in the path of the remote and the player. • Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lam...
Questo manuale è adatto anche per i modelli :Stereo - PMC-D307 (465.29 kb)