valutazioni - 3, GPA: 3.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
39 Specifications ......................................... 42 Index ........................................ Back cover Getting Started Getting Started Step 1: Hooking up the system Do the following procedure 1 to 5 to hook up your system using the supplied cords and accessories. AM loop antenna FM antenna 5123411Left speakerRight speaker Connect the speakers. Connect the FM/AM antennas. 12 Connect the speaker cords to the Set up the AM loop antenna, then SPEAKER jacks of the same color. connect it. Keep the speaker cords away from the Extend the FM lead antennas to prevent noise. AM loop antenna antenna horizontally. FM75 AM R + L + – Insert only the stripped portion. Black (O)Red (O) 3 Set VOLTAGE SELECTOR to position of your local power line voltage (except for North American, Mexican, and Australian models). 110-120V 220-240V VOLTAGE SELECTOR 4 Connect the power cord to a wall outlet. Demo mode appears in the display. If the plug on this unit does not fit your wall outlet, detach the supplied adapter from the plug (except for North and South American countries, Australia and Malaysia). 5 Deactivate the demo mode by pressing DISPLAY/DEMO when the system power is turned off. The demo mode is also deactivated when you set the time. To attach the front speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Inserting two size AA (R6) batteries into the remote }} ] ] Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Hold down PLAY MODE and press POWER so that "LOCK" appears in the display. Step 2: Setting the Step 3: Presetting time radio stations You must set the time before using the timer functions. You can preset up to 40 stations, 20 for FM, 10 1 2,4 3,5 a.¤.0) 1 Press CLOCK/TIMER SET. The hour indication flashes. for MW and 10 for SW. For North and South American, Australian and Thai models, you can preset up to 30 stations, 20 for FM and 10 for AM. a.¤.0) POWER 3,5 6 2 1 4 1 Press TUNER/BAND repeatedly 2 Turn the jog dial to set the hour. The clock is on a 12-hour system. 3 Press ENTER/NEXT. The minute indication flashes. 4 Turn the jog dial to set the minute. 5 Press ENTER/NEXT. The clock starts working. Tips • If you’ve made a mistake, start over from step 1. • Setting the time deactivates the demo mode . If you want to display the demo mode, press DISPLAY/DEMO when the power is off. Note When setting the time, set the wqualizer display to anything other than Spectrum analyzer pattern 3. (See “To change the equalizer display” on page 30.) until the band you want appears in the display. Every time you press this button, the band changes as follows: North and South American, Australian and Thai models: FM .AM Other models: FM nMW nSW n 2 Press TUNING MODE repeatedly to select “AUTO”. 3 Turn the jog dial. The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. TUNED STEREO MHz VOLUME AUTO 4 Press TUNER MEMORY. A preset number appears in the display. Preset number TUNED STEREO VOLUME AUTO 5 Turn the jog dial to select the preset number you want. 6 Press ENTER/NEXT. The station is stored. 7 Repeat steps 1 to 6 to store other stations. To tune in a station with a weak signal Press TUNING MODE repeatedly to select “MANUAL” in step 2, then turn the jog dial to tune in the station. To change the preset number Start over from step 1. To change the AM tuning interval (Except for the Middle Eastern model) The AM tuning interval is factory-preset to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the ENTER/NEXT button, turn the power back on. When you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. Tip The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. Connecting optional AV components To enhance your system, you can connect optional components. Refer to the instructions of each component. Connecting audio components Select one of the following two connections, depending on the equipment to be connected and method of connecting. Connecting an MD deck for digital recording (except U.S. model) You can record from CD into the MD deck digitally by connecting an optical cable. To the DIGITAL IN jack of the MD deck Connecting an MD deck for analog recording Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION rep...
Questo manuale è adatto anche per i modelli :Stereo - MHC-GR7 (632.83 kb)
Stereo - MHC-GR7J (632.83 kb)
Stereo - MHC-RX70 (632.83 kb)