valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
43 Combining recorded tracks ................ 44 Undoing the last edit ........................... 45 Labelling an MD ................................... 46 The cassette deck** Recording CDs by specifying the track order ................................................ 48 Recording a CD, etc., on a tape manually ......................................... 49 Sound Adjustment Reinforcing Bass (DBFB) ..................... 51 Listening with the surround feature .............................................. 52 Adjusting the balance of the speakers ................................ 52 Other Features Labelling the preset stations ............... 53 Falling asleep to music ........................ 54 Waking up to music ............................. 55 Timer-recording radio programmes.. 57 Additional Information Precautions ............................................ 59 System limitations of MDs* ................ 61 Troubleshooting ................................... 62 Specifications ........................................ 65 Index ....................................................... 67 Getting Started Step 1: Hooking up the system Do the following procedures 1 to 6 to hook up your system using the supplied cords and accessories. To complete the setup, do steps 2 and 3 also. Left speakerRight speaker FM aerial AM loop aerial Tuner CD player*1 To the wall outlet. Cassette deck*2 MD deck*3 Tourist model only*4 220-240 110-120 451-2 1-1 632 *1 CMT-101/HCD-101 consists of the CD player, the tuner and the amplifier. *2 This is the optional cassette deck TC-TX101. Connect it to the tuner CD player if you have it. *3 This is the optional MD deck MDS-MX101. Connect it to the tuner CD player if you have it. *4 As for tourist model, the supplied AM loop aerial is different from the other model, but use it as the following explanation. 2 Connect the optical cable (supplied 1 Connect the MD deck. with MDS-MX101) to CD DIGITAL (for the customers who purchased OUT of the tuner CD player and MD MDS-MX101 only) DIGITAL IN of the MD deck. 1 Connect the system cord of the MD To connect tuner CD player deck to the MD jack of the tuner CD player. This mark should be at the right side. SONY logo should be at the left side. To connect MD deck CD DIGITAL OUTOPTICAL To connect MD To disconnect MD Pull this part (the outer frame) toward you. The outer frame slides toward you and comes out. DIGITALOPTICALIN DIGITALOPTICALIN SONY logo should be at the right side. 2 Connect the cassette deck. 4 Connect the speakers. (for the customers who purchased Connect the speaker cords to the speaker TC-TX101 only) jacks. Be sure to keep the speaker cable FM 75 W Connect the system cord of the cassette away from the aerials. deck to the TAPE jack of the tuner CD player in the same way as 1-1. the rear side of the tuner CD player 3 Connect the FM/AM aerials. FM lead aerial The supplied FM lead aerial is the simplified aerial. For better reception, using the optional FM external aerial is recommended. Extend the FM lead aerial up vertically as high as possible. Black (}) Gray (]) This part should be inserted. Gray (]) AM loop aerial the rear side of the speaker SS-Q101/ Q101A Set up the AM loop aerial, then connect it. Insert the plug with the convex slot on the right into the socket until it clicks. This part should be inserted. Black (}) Gray (]) Make sure if the speaker cords are connected firmly by pulling the speaker cords lightly. When they come off, connect them again. continued Step 1: Hooking up the system (continued) 5 Set VOLTAGE SELECTOR to match your local power line voltage (except for European model). 220-240 110-120 6 Connect the power. Connect the mains lead of the tuner CD player to the mains after you have made all the above connections. Inserting two R6 (size AA) batteries into the remote Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. Step 2: Setting the time Before turning on the system, you must set the time beforehand to use the timer function. The clock is on a 24 -hour system for the European model, and a 12-hour system for other models. The European model is used for illustration purpose. Remote (inside) 1 2,3,4 2,3,4 1 Press TIMER SET. 2 Press TIMER + or – to display “CLOCK” and press ENTER. The hour indication begins flashing. 3 Set the current hour by pressing TIMER + or – and press ENTER. The minute indication begins flashing. 4 Set the current minute by pressing TIMER + or – and press ENTER. The clock starts working. To correct the clock setting. Repeat steps 1 through 4. About the time indication • The built-in clock shows the time in the display when power is off. • The upper dot of the “:” in the time display flashes for the 0 to 29 seconds and the lower dot flashes for the 30 to 59 seco...