valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. •To record non-preset stations, use + and – in step 2 to tune in the desired station manually. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing rREC. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal) , since the deck automatically detects the tape type. You can also use the jog dial’s AMS* functions to quickly search for songs you want to hear. To select either deck A or B, press DECK A (or DECK B (on the remote. (Power) 3 p =+PPAUSE VOLUME 0) DOLBY NR 112 A . P p =+ 0) DECK A ( DECK B ( VOL +/– Basic Operations continued Playing a tape (continued) 1 Press ¤and insert a recorded tape in deck A or B. With the side you want to play facing forward 2 Press DIRECTION repeatedly to select Ato play one side. Select §* to play both sides. To play both decks in succession, select RELAY (relay play).** 3 Press TAPE A (or TAPE B) ( (DECK A (or DECK B) (on the remote). Press TAPE A (or TAPE B) 9to play the reverse side. (Press DECK A (or DECK B) (again on the remote to play the reverse side.) The tape starts playing. * The deck stops automatically after repeating the sequence five times. ** Relay play always follows the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side). To Do this Stop play Press p. Pause Press PPAUSE. Press again to resume play. Fast-forward Press 0or ). Rewind Press 0or ). Remove the cassette Press ¤. Adjust the volume Turn VOLUME (or press VOL +/– on the remote). Tips • Pressing TAPE A (or TAPE B) (or 9when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play). • You can switch from another source to the tape deck just by pressing TAPE A (or TAPE B) (or 9(Automatic Source Selection). • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears. • When dubbing tapes originally recorded with Dolby NR, the dubbed tape is automatically played with Dolby NR. Searching for the beginning of a track (AMS*) During playback, turn the jog dial the same direction as the 9or (indicator to go forward. Turn the opposite direction to go back. (Or press =or +on the remote.) The search direction, + (forward) or – (back), and number of songs being skipped (1~9) appear in the display. Example: searching forward 2 songs * AMS (Automatic Music Sensor) Notes The AMS function may not operate correctly under the following circumstances: – When the unrecorded space between songs is less than 4 seconds long. – If completely different information is recorded on the left and right channels. – When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax). – When the unit is placed near a television. (In this case, we recommend moving the unit farther away from the television or turning off the television.) Recording from a tape — High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. (Power) p 4 1 23 1 DOLBY NR 1 Press ¤and insert a recorded tape in deck A and a blank tape in deck B. With the side you want to play/record facing forward 3 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 4 Press PPAUSE. Dubbing starts. To stop dubbing Press p. Tips • When you dub on both sides, start recording from the front side. If you record from the reverse side, recording stops at the end of the reverse side. • If you set DIRECTION to §when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together. • You don’t have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A. Basic Operations 2 Press HI-DUB. Deck B stands by for recording. The CD Player Using the CD display You can check the remaining time of the current track or that of the CD. (Power) DISPLAY/DEMO /Press DISPLAY/DEMO during playback. Each time you press the button during normal playback, the display changes as follows: nPlaying time on the current track µ Remaining time on the current track µ Remaining time on current CD (1 DISC mode) or “PLAY” display (ALL DISCS mode) µ Clock display (for eight seconds) µ Effect (P FILE*) name or “EFFECT ON (OFF)” µ Name of spectrum analyzer display pattern * MHC-GRX9000/RX900/GRX7/GRX7J and MHC-RX77 (Canadian model) only. To check the total playing time and the number of tracks on a CD Press DISPLAY/DEMO in the stop mode. If you press DISPLAY/DEMO again, the clock display...
Questo manuale è adatto anche per i modelli :Stereo - MHC-GRX5 (942.15 kb)
Stereo - MHC-GRX9000 (942.15 kb)
Stereo - MHC-R500 (942.15 kb)
Stereo - MHC-R700 (942.15 kb)