valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
FM n MW n SW n The station is stored. or 6 Repeat steps 1 to 5 to store other FM n MW n LW n stations. To tune in a station with a weak signal Press + or – repeatedly in step 2 to tune in the 2 Press and hold + or – until the frequency indication starts to station manually. change, then release. To change the preset number Scanning stops when the system tunes in Start over from step 1. a station. “TUNED” and “STEREO” (for a stereo program) appear. To change the AM tuning interval (Except for the European model) 1 DISC STEREO NEXT TUNED MHzVOLUME The AM tuning interval is factory set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the ENTER button, turn the power back on. When you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. Tip The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. 3 Open the front cover by pushing the Inserting CDs right edge of the cover. You can insert up to 51 discs into this player. We recommend you use the PLUS ONE slot for CDs you will be inserting and removing frequently (see page 29). 1 43,7 2 Playing position Rotary table Loading position Front cover 4 Turn the jog dial until you find the disc slot where you want to insert a disc, while checking the disc number (written beside every slot and also indicated in the display). Disc slot at the Disc number loading position 1 Press (power) to turn on the player. 2 Press FUNCTION repeatedly until “CD” appears. The disc number* or Disc Memo (see page 33 for details) at the loading position appears in the display. As you turn the jog dial, the disc number or Disc Memo changes. * If you have already inserted discs, the disc number at the playing position appears. When you turn the jog dial, the displayed disc number changes to the one at the loading position. NEXT 1 DISC DISC VOLUME Disc number or the Disc Memo 5 Insert a disc with the label side facing right. Notes • Make sure you have inserted the disc into each slot at a right angle to the rotary table. If the disc is not put in straight, it may damage the player or the disc. • Make sure the rotary table comes to a complete stop before inserting or removing discs. With the label side facing right 6 Repeat steps 4 and 5 to insert more discs. 7 Close the front cover by pushing the right edge of the cover until it clicks. The rotary table turns and the disc slot at the loading position is set to the playing position. Always close the front cover except when you insert or remove discs. Removing CDs After following Steps 1 to 3 of “Inserting CDs” on page 12, remove the discs. Then close the front cover. Notes • Do not insert an empty 8 cm (3-inch) CD adaptor. It may damage the player. • Do not attach anything such as seals or sleeves to CDs. It may damage the player or the disc. • If you drop a disc into the player and the CD won‘t go into the slot correctly, consult your nearest Sony dealer. • When transporting the player, remove all discs from the player. • If you want to remove the disc played, press ENTER after opening the front cover. The disc comes to the loading position. Remove the disc after the rotary table comes to a complete stop. Tips • To play the disc you want independently, see “Playing your favorite CD independently”. • You can display the original Disc Memos instead of the disc numbers (see “Labeling a CD”) to locate it easily when you start playing. When you select a CD-TEXT disc, the disc title is displayed instead of the disc number. Connecting optional AV components To enhance your system, you can connect optional components. Refer to the instructions of each component. Connecting audio components Select one of the following two connections, depending on the equipment to be connected and method of connecting. Connecting an MD deck for digital recording You can record from CD into the MD deck digitally by connecting an optical cable. To the DIGITAL IN jack of the MD deck Connecting an MD deck for analog recording Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until “MD” appears. To the audio output To the audio input of the MD deck of the MD deck Note If you cannot select “MD” even when you have pressed FUNCTION, press while holding down FUNCTION when the power is turned off. “VIDEO” will be switched to “MD”. To return to “VIDEO” do the same procedure. Tip (MHC-F250AV only) When you connect a Sony MD deck, you can use the MD ·, P, and p buttons on this unit’s remote to perform play, pause, and stop operations. Connecting a super woofer speaker You can connect an optional super woofer speaker. To super woofer Connecting a VCR Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected VCR, press while holding down FUNCTION when the powe...
Questo manuale è adatto anche per i modelli :Stereo - MHC-F150 (1.09 mb)
Stereo - MHC-FR10 (1.09 mb)