valutazioni - 4, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
When the remote no longer operates the system, replace both batteries with new ones. • When you set the time, the demonstration is deactivated. To activate the demonstration again, press DISPLAY/DEMO while the system is off. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Hold down PLAY MODE and press 1/uto turn off the system. Step 2: Setting the time You must set the time before using the timer functions. The clock is on a 24- hour system for the European and Brazilian models, and a 12-hour system for other models. The 24-hour system model is used for illustration purpose. 1 3,5 2,4 LBT-D390/D790/G5500/XB33/XB33K/ XB44/XB44K/XB50/XB60 only 1 Press t/CLOCK SET. The hour indication flashes. 4 Press TUNING +/– to set the minutes. 5 Press ENTER/NEXT. The clock starts. LBT-XB66/XB66K/XB660 only 1 Press t/CLOCK SET. The hour indication flashes. 2 Press TUNING +/– to set the hour. 2 Press TUNING +/– to set the hour. 3 Press ENTER/NEXT. The minutes indication flashes. 3 Press ENTER/NEXT. The minutes indication flashes. 4 Press TUNING +/– to set the minutes. 5 Press ENTER/NEXT. The clock starts. Tip If you make a mistake, start over from step 1. Step 3: Presetting radio stations You can preset the following number of stations: — 2 band model: 20 for FM and 10 for AM — 3 band model: 20 for FM, 10 for MW, and 10 for LW — 4 band model: 20 for FM, 10 for MW, 10 for LW, and 5 for UKV 3 Press TUNING +/–. The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. LBT-D390/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 DOLBY NR OFF TUNED STEREO AUTO ALL DISC S MHz LBT-XB66/XB66K/XB660 The bands you can select depend on the kind of tuner built into your system. Confirm the bands by pressing TUNER/BAND repeatedly. DISCALL DOLBY NR OFF AUTO TUNED STEREO MHzS 1/u 4 Press TUNER MEMORY. (Power) 6 4 23,51 A preset number flashes in the display. LBT-D390/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 DOLBY NR OFF TUNED STEREO AUTO ALL DISC S LBT-XB66/XB66K/XB660 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press this button, the band changes as follows: DISCALL DOLBY NR OFF AUTO TUNED STEREO S 5 Press TUNING +/– to select the preset number you want. 2 band model: FM .AM LBT-D390/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 3 band model: DOLBY NR OFF FM nMW nLW TUNED STEREO AUTO n ALL DISC S 4 band model: FM nMW nLW nUKV* n * When you select this band, “STEREO Plus” appears in the display. LBT-XB66/XB66K/XB660 DISCALL DOLBY NR OFF AUTO TUNED STEREO S 2 Press TUNING MODE repeatedly until “AUTO” appears in the 6 Press ENTER/NEXT. The station is stored. display. 7 Repeat steps 1 through 6 to store other stations. continued Step 3: Presetting radio stations (continued) To tune in a station with a weak signal Press TUNING MODE repeatedly until “MANUAL” appears in step 2, then press TUNING +/– to tune in the station. To change the preset number Start over from step 1. Note The preset stations are canceled when you disconnect the power cord or if a power failure occurs for half a day. Connecting optional AV components To enhance your system, you can connect optional components. Refer to the instructions included with each component for details. Connecting audio components Connecting a turntable Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected turntable, press FUNCTION repeatedly until “PHONO” appears. To the audio output of the turntable Note Using the turntable at high volume may cause distortion or howling. This is often caused by the bass sound from the speakers. The bass sound may be picked up by the needle of the turntable, and produce the distortion or howling. To avoid this, do the following: 1 Keep some distance between the speakers and the turntable. 2 Stop using the surround effect. 3 Install the speakers or the turntable on a firm and stable surface. 4 Press DBFB repeatedly until “DBFB ” disappears from the display (LBT-D390/G5500/ XB33/XB33K/XB50 only). Press SUPER WOOFER repeatedly until the indicator on this button goes off (except for LBTD390/ G5500/XB33/XB33K/XB50). Connecting an MD deck for digital recording (except for LBT-D390/ D790/G5500) You can record a CD to an MD digitally by connecting your MD deck using an optical cable. To the digital input of the MD deck Connecting an MD deck for analog recording (except for LBT-D390/ D790/G5500) Be sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until “MD” appears. To the audio outputs To the audio inputs of of the MD deck the MD deck Note If you cannot select “MD” by pressing FUNCTION, press 1/uwhile pressin...
Questo manuale è adatto anche per i modelli :Stereo - LBT-D390 (855.98 kb)
Stereo - LBT-G5500 (855.98 kb)
Stereo - LBT-XB33 (855.98 kb)
Stereo - LBT-XB33K (855.98 kb)