valutazioni - 2, GPA: 2
(
)
)
|
Foto e specifiche Sony LBT-XG500 |
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
1 Load CDs and a recordable tape into deck B, then press FUNCTION repeatedly until “CD” appears. 2 Press PLAY MODE repeatedly until “PROGRAM” appears. 3 Select a CD and track by pressing DISC SKIP and turning the jog dial, then press PLAY MODE once. Repeat this procedure to program the remaining tracks for A side. 4 Press X on the remote to insert a pause at the end of side A. “P” appears and the total playing time resets to “0.00” in the display. 5 Repeat step 3 to program the remaining tracks to be recorded on side B. 6 Press CD SYNC. Deck B stands by for recording. 7 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 8 Press X. Recording starts. 9 Press x on the deck B and the CD player to stop recording. Tip To check the required tape length for recording a CD, press EDIT so that “EDIT” flashes after you have loaded a CD and switched function to CD. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively (Tape Select Edit). Notes • You cannot use Tape Select Edit for discs containing over 20 tracks. • You cannot use this function when Program Play mode has been set. After clearing the entire program, follow the above procedure. Timer-recording radio programs To timer-record, you must preset the radio station (see “Presetting radio stations” on page 12) and set the clock (see “Setting the time” on page 8) beforehand. 1 Tune in the preset radio station (see “Listening to the radio” on page 13). 2 Press c/CLOCK SET. 3 Press v/V repeatedly to select “REC,” then press ENTER/NEXT. “ON” appears and the hour indication flashes in the display. 4 Set the time to start recording. Press v/V to set the hour, then press ENTER/NEXT. The minute indication starts flashing. Press v/V to set the minute, then press ENTER/NEXT. The hour indication flashes again. 5 Set the time to stop recording following the above procedure. The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”), then the original display appears. 6 Insert a recordable tape into deck B. 7 Turn off the power. When the recording starts, the volume level is set to the minimum. Tape To Do this Check the setting Press TIMER SELECT. Press v/V to select “SEL REC.” Then, press ENTER/NEXT. To change the setting, start over from step 1. Cancel timer Press TIMER SELECT. Press operation v/V to select “TIMER OFF.” Then, press ENTER/NEXT. Notes • The system turns on 15 seconds before the preset time. • If the system is on at the preset time, the Timer recording will not be made. • When you use the Sleep Timer, Daily Timer and Timer recording will not turn on the system until the Sleep Timer turns it off. • Recording starts from the front side. Sound Adjustment Adjusting the sound To reinforce lower bass sound (SUPER WOOFER) Press SUPER WOOFER. Each time you press this button, the super woofer level display changes cyclically as follows: SUPER WOOFER FLAT t LOW t HIGH To select the super woofer mode Press SUPER WOOFER MODE while the super woofer is on. Each time you press this button, the super woofer mode display changes as follows: MODE MOVIE y MODE MUSIC For a powerful sound (GROOVE) Press GROOVE. The volume switches to power mode, the equalizer curve changes, and the indicator on the GROOVE button lights up. Press GROOVE again to return to the previous volume. Note Canceling the Groove mode cancels the equalizer curve and super woofer level. Adjust the equalizer settings to obtain the desired effect. Selecting the audio emphasis effect Selecting the preset effect from the music menu Press DIRECT EQUALIZER button you want. The preset effect name appears. See the chart “Music menu options.” To Press Select USER FILE P.FILE Cancel the effect FLAT (or FILE SELECT ON/OFF on the remote). Music menu options “SUR ” appears if you select an effect with surround effects. Effect For SALSA standard music sources REGGAE SAMBA TANGO MOVIE DANCE JAZZ ROCK GAME soundtracks and special GUITAR listening situations Selecting the surround effect Press SURROUND. Every time you press the button, the display changes as follows: SURROUND ON (SUR ) Y SURROUND OFF Making a personal audio emphasis file –– Personal File You can create personal files of audio patterns (surround effect and graphic equalizer) and store them in the system’s memory. Later, you can call up an audio pattern when playing a favorite tape, CD, or radio program. Before operating, first select the basic audio emphasis you want for your sound. 1 Press b/B to select the frequencies, then press v/V to adjust the level. Frequency level VOLUME Sound adjustment DOLBY NR OFF ALL DISC S 2 Press ENTER/NEXT. This setting is automatically stored as P.FILE. Any settings previously stored at this memory location are erased and replaced by the new settings. To call up the personal file Press P.FILE. Tip If you choose another audio emphasis, the adjus...
Questo manuale è adatto anche per i modelli :Stereo - LBT-XG60 (256.29 kb)
Stereo - LBT-XG700 (256.29 kb)
Stereo - LBT-XG80 (256.29 kb)