valutazioni - 3, GPA: 3.3
(
)
)
|
Foto e specifiche Sony CMT-EP707 |
Facilità d'uso
Press TUNER (TUNER/BAND on the remote) or MD to select the desired source to record. 3 Load the CD you want to record. Tune in the radio station (or load another audio source) you want to record. 4 Press z REC PAUSE/START. The deck stands by for recording. When you want to record on the reverse side, press nN. 5 Press FM MODE/DIR (REPEAT/DIR on the remote) repeatedly to select g to record on one side, h to record on both sides. 6 Press z REC PAUSE/START again. Recording starts. Press z REC PAUSE/START again, and then start playing the desired source. To stop recording Press x. Tips • When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side. • For recording from the radio: If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Note To erase a recording, remove all the CDs, press CD, and then press z REC PAUSE/START twice. 14GB Recording a CD by specifying track order —Program Edit 1 Load a recordable tape. 2 Program CD tracks following steps 1 to 6 in “Programing the CD tracks” on page 9. 3 Press z REC PAUSE/START. The tape deck stands by to record. The CD player stands by for playback. 4 Press FM MODE/DIR (REPEAT/DIR on the remote) repeatedly to select g to record on one side. Select h to record on both sides. 5 Press z REC PAUSE/START again. Recording starts. Timer-recording radio programs To timer-record, you must preset the radio station (see “Presetting radio stations” on page 10) and set the clock (see “Setting the clock” on page 7) beforehand. 1 Press CLOCK/TIMER SET on the remote. 2 Press CLOCK/TIMER SET on the remote repeatedly until “SET TMR” appears, then press ENTER. “ON” appears, and the hour indication flashes. 3 Set the starting time. Press PRESET/CLOCK/TIMER + or – on the remote repeatedly to set the hour, then press ENTER. The minute indication begins flashing next. Press PRESET/CLOCK/TIMER + or – on the remote repeatedly to set the minute, then press ENTER. 4 Set the time to stop the recording following the procedure in step 3. 5 Press PRESET/CLOCK/TIMER + or – on the remote repeatedly until “RECORD” appears, then press ENTER. 6 Insert a recordable tape with the side you want to record on facing up. 7 Press PRESET/CLOCK/TIMER + or – on the remote repeatedly to tune in the desired preset station, then press ENTER. 8 Press ?/1 to turn off the system. To Do this Check or change the Turn on the system and then setting start over from step 1. Activate the timer Press CLOCK/TIMER ON/ operation OFF on the remote until “REC” appears. Cancel the timer Press CLOCK/TIMER ON/ operation OFF on the remote until “REC” and “DAILY” disappear. Notes • When you use the recording timer at the same time as the Sleep Timer, the Sleep Timer setting has priority. • You cannot activate the Daily Timer and the recording timer at the same time. • If the system is on at the preset time, the timer- recording will not be activated. • The volume is reduced to minimum during recording. • If the system is in the recording or recording-pause mode at the preset time, the timer recording will not be made. Tape 15GB Sound Adjustment Timer Sound Adjustment Timer Adjusting the sound Reinforcing the bass sound —MEGA BASS You can listen to music with stronger bass tones. Press MEGA BASS. “MEGA BASS” appears in the display and the bass is reinforced. Press again to cancel MEGA BASS. Selecting the preset effect from the music menu Press MUSIC MENU (or MUSIC MENU +/– on the remote) repeatedly to select the preset effect you desire. Each time you press the button, the display changes cyclically as follows: ROCK t POP t JAZZ t FLAT* t ROCK t ... * “FLAT” is displayed for a few seconds. To cancel the effect Press MUSIC MENU (or MUSIC MENU +/– on the remote) repeatedly until “FLAT” appears. Turning off the sound —Muting You can turn off the sound temporarily. Press MUTING on the remote. Press again to cancel muting. Tip You can also turn up the volume by turning VOLUME clockwise or turning off the power and turning it on again. Falling asleep to music — Sleep Timer You can set the system to turn off after certain amount of time, so that you can fall asleep to music. Press SLEEP on the remote. Every time you press the button, the minute display (the turn-off time) changes as follows: 90 t 80 t 70 t … t 10 t OFF t … To Press Check the SLEEP on the remote once. remaining time Change the SLEEP on the remote repeatedly time to turn off to select the time you want. Cancel the Sleep SLEEP on the remote repeatedly Timer function until “SLEEP OFF” appears. Waking up to music — Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” page 7). 1 Prepare the sound source you want to play. • CD: Place a CD. • Tape: Insert a tape with the side you want to play on facing up. • Radio: Tune in the station you want (see “Listening to the radio” on page 11). 2 Adjust t...