valutazioni - 4, GPA: 4.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
The STANDBY indicator lights up in red. On The system is connected to the network even though the power of the system is turned off, and resumes operations when controlled over the network. The STANDBY indicator lights up in amber. * Factory setting Setting the auto access permission You can set access restriction or permission for the devices on the device list. 1 Press HOME NETWORK, then press OPTIONS. 2 Press M/m to select “Access Settings,” then press ENTER. 3 Press M/m to select “Auto Access,” then press ENTER. 4 Press M/m to select “Allow” or “Not Allow,” then press ENTER. Display item Description Allow* All the devices on the home network are permitted to access this system. This system can start a PARTY as a host device and join a PARTY as a guest device if requested. Not Allow The system restricts a new device that is accessing the system. When connecting a new device to the home network, add the device to the device list, and set access permission (page 52). * Factory setting Note Up to 20 devices can be added to the device list. If 20 devices have already been registered, “Device Full” appears, and a new device cannot be added to the list. In this case, delete unnecessary devices from the lists (page 40). To add devices to the device list 1 Press HOME NETWORK, then press OPTIONS. 2 Press M/m to select “Access Settings,” then press ENTER. 3 Press M/m to select “Control Device,” then press ENTER. The device list appears. 4 Press m repeatedly to select “Add Device,” then press ENTER. 5 Press M/m to select the desired device, then press ENTER. The selected device is added to the device list. For details on setting the access permission, see “To set access permission for the devices” (page 53). 52GB To set access permission for the devices To set access permission for the devices 1 Press HOME NETWORK, then press OPTIONS. 2 Press M/m to select “Access Settings,” then press ENTER. 3 Press M/m to select “Control Device,” then press ENTER. The registered device list appears. 4 Press M/m to select the desired device, then press ENTER. 5 Press M/m to select “Access,” then press ENTER. 6 Press M/m to select “Allow” or “Not Allow,” then press ENTER. To delete a device from the list Select “Delete” in step 5, then press ENTER. Select “OK” on the confirmation display, then press ENTER. Setting the PARTY STREAMING function You can set the system to use the PARTY STREAMING function. 1 Press HOME NETWORK, then press OPTIONS. 2 Press M/m to select “PARTY STREAMING,” then press ENTER. 3 Press M/m to select “On” or “Off,” then press ENTER. Display item Description On* The system can be detected by other devices on the home network. The system can start or close a PARTY, and join or leave a PARTY. Off The system can be detected by other devices on the home network. However, the system cannot start or close a PARTY, and cannot join or leave a PARTY. * Factory setting Renaming the unit You can change the unit name to be easily recognizable by other devices on the home network. 1 Press HOME NETWORK, then press OPTIONS. 2 Press M/m to select “Device Name,” then press ENTER. 3 Press ENTER to select the current unit name. 4 Rename the unit, then press ENTER. A device name can be up to 30 characters long. For details on entering characters, see “Entering characters” (page 14). Additional information 53GB Changing the sound settings Adjusting the bass and treble You can adjust the bass and treble to your preferences. 1 Press EQ repeatedly to select “BASS” or “TREBLE.” 2 Press M/m to adjust the level. The setting display disappears when no operation is performed for 4 seconds. Generating a more dynamic sound (Dynamic Sound Generator X-tra) You can reinforce the bass and the treble to create a more powerful sound. This function is factory set to “ON.” Press DSGX to select “ON.” The DSGX function turns on. To cancel the DSGX function Press DSGX to select “OFF.” 54GB Using the timers The system offers two timer functions. If you use both timers, the Sleep Timer has priority. Using the Sleep Timer You can set the timer so that the system enters standby mode automatically after a certain period of time (Sleep Timer function). This function works even if the clock is not set. 1 Play the desired sound source. 2 Press SLEEP repeatedly. After the selected time elapses, the system turns off automatically. If you select “AUTO,” the system turns off automatically after the current disc or USB device stops, or within 100 minutes. Note If you perform the following operations before the Sleep Timer goes off, the Sleep Timer resets. – Unplug the power cord. – Turn off the system. – Reset the system to the factory settings. Additional information 55GB Using the Play Timer Using the Play Timer 1 Prepare the sound source. Select the sound source, and then press VOLUME +/– to adjust the volume. To start from a specific CD track or audio file, create your own program. 2 Press TIMER MENU. 3 Press M/m repeatedly to select “PLAY SET?,” then press ENT...
Questo manuale è adatto anche per i modelli :Stereo - CMT-MX750NI (3.18 mb)