Log:
valutazioni - 4, GPA: 3.8 ( )

Istruzioni per l'uso Sony, Modello MHC-RG441

Produttore : Sony
File Size : 531.14 kb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :
Stereo - MHC-RG441 (495.31 kb)es
Stereo - MHC-RG441 (569.22 kb)ru
Stereo - MHC-RG441 (471.71 kb)es
Stereo - MHC-RG441 (497.52 kb)en

Facilità d'uso


• The data is not stored in MP3 format. • Discs containing files other than MPEG 1 Audio Layer-3 files cannot be played. MP3 audio tracks take longer to play back than others.* • After the system reads all tracks on the discs, playback may take more time than usual if: – the number of albums or tracks on the disc is very large. – the album and track organization structure is very complex. The album name, track title and ID3 tag do not appear correctly.* • Use a disc that conforms with ISO9660 level 1, level 2 or Joliet in the expansion format. • The disc ID3 tag is not ver. 1 nor ver. 2. * MHC-GX750/GX450/RG555/RG551S/RG444S/ RG441/RG333/RG222/RG221/RX550 only 34GB Tuner Severe hum or noise/stations cannot be received. (“TUNED” or “STEREO” flashes in the display.) • Set the proper band and frequency (page 15). • Connect the antenna properly (page 8). • Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna. • The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. • Locate the antennas as far away from the speaker cords as possible. • Try turning off surrounding electrical equipment. A stereo FM program cannot be received in stereo. • Press FM MODE repeatedly until “STEREO” appears. Tape deck The tape does not record or play, or there is a decrease in sound level. • The heads are dirty. Clean them (page 38). • The record/playback heads are magnetized. Demagnetize them (page 38). The tape does not erase completely. • The record/playback heads are magnetized. Demagnetize them (page 38). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty. Clean them (page 38). Noise increases or the high frequencies are erased. • The record/playback heads are magnetized. Demagnetize them (page 38). The tape does not record. • No cassette is loaded. Load a cassette. • The tab has been removed from the cassette. Cover the broken tab with adhesive tape (page 38). • The tape has wound to the end. Transmitter (MHC-GX750 only) There is no sound. • Check the connection of the optional component. • Check that the optional component is turned on. • Turn up the volume on the connected optional component, if the transmitter is connected to the headphones jack. • Change the radio frequency using the CHANNEL selector on the transmitter, then press WIRELESS on the unit again. • If you connect the transmitter to the analog out jacks of an audio reproducer, make sure that the NOISE FILTER switch is set to OFF. • Make sure that the NOISE FILTER switch is set to either ON or OFF (If the switch gets stuck between ON and OFF, the sound will be cut off). There is severe hum or noise. • If the transmitter is connected to the headphones jack, turn down the volume of the connected optional component. If the connected optional component has the BASS BOOST or MEGA BASS function, set these function to OFF. • If the connected optional component has a LINE OUT jacks, connect its LINE OUT jacks. • Change the radio frequency with the CHANNEL selector on the transmitter then press WIRELESS on the unit again. • If you connect the transmitter to the analog out jacks of an audio reproducer, make sure that the NOISE FILTER switch is set to OFF. If the system still does not operate properly after performing the above measures, reset the system as follows: Use buttons on the unit for the operation. 1 Disconnect the power cord. 2 Reconnect the power cord. 3 Press x, PLAY MODE/TUNING MODE and DISC 1 at the same time. 4 Press ?/1 to turn on the system. The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer. Troubleshooting 35GB Messages One of the following messages may appear or flash in the display during operation. CD/MP3 NO DISC There is no disc in the player or you have loaded a disc that cannot be played on this system (such as DVD, VCD, or CD-ROM without MP3 audio tracks, etc.). OVER You have reached the end of the disc while pressing M during playback or pause. PUSH STOP You pressed PLAY MODE during playback. READING The system is reading information of the disc. Some buttons are not available. STEP FULL You tried to program 26 or more tracks (steps). Tape NO TAB You cannot record the tape because the tab has been removed from the cassette. NO TAPE There is no tape in the tape deck. 36GB Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconn...

Questo manuale è adatto anche per i modelli :
Stereo - MHC-GX250 (531.14 kb)
Stereo - MHC-GX450 (531.14 kb)
Stereo - MHC-GX750 (531.14 kb)
Stereo - MHC-RG555 (531.14 kb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie