valutazioni - 4, GPA: 3.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Before operation, first select the audio emphasis you want for your basic sound. Use buttons on the unit for the operation. 1 Press EQ BAND repeatedly to select a frequency band, then turn – EQ + to adjust the level. Frequency band Frequency level 2 Press and hold P FILE. A personal file number appears. 3 Press P FILE repeatedly to select P FILE 1 – 3 you want to store the equalizer setting. 4 Press ENTER. “COMPLETE” appears. This setting is automatically stored as the personal file you selected in step 3. Other operations To Press Call up a P FILE repeatedly to select the personal file desired personal file number. Cancel a personal EFFECT ON/OFF repeatedly file until “EFFECT OFF” appears. 22GB Selecting the surround effect Press SURROUND on the unit. Each time you press the button, the display changes as follows: SURROUND ON (SURR) Y SURROUND OFF (off) Enhancing video game sound —Game Sync You need to connect a video game machine (see “Hooking up optional components” on page 29). Press GAME on the unit. Tips • In the standby mode, the system automatically turns on. • The GAME EQ is automatically selected (page 22). • These operations cannot be performed in Power Saving Mode (page 27). Mixing video game sound with other sound source — Game Mixing Use buttons on the unit for the operation. 1 Select the desired source sound. 2 Press GAME MIXING. Each time you press the button, the level of the game sound changes cyclically as follows: MIXING LOW t MIXING MID t MIXING HIGH t MIXING OFF Notes • If you start recording while Game Mixing is activated, Game Mixing is canceled. To record the mixed sound, press GAME MIXING after step 4 of “Recording on a tape manually” on page 20, and then press REC PAUSE/START to start the recording. • The game sound is not output while the tape deck is performing the AMS operation (page 19). Tip Once Game Mixing is activated, it will remain active while the power is on even if the source sound is changed. Sound Adjustment 23GB Singing along (MHC-RG555 only) You can sing along by connecting an optional microphone. 1 Turn MIC LEVEL on the unit to MIN to turn down the microphone control level. 2 Connect an optional microphone to MIC. 3 Start playing the music. 4 Adjust the microphone volume by turning MIC LEVEL on the unit. After you have finished Turn MIC LEVEL on the unit to MIN and disconnect the microphone from MIC. Mixing and recording sounds You can “mix” sounds by playing one of the components and singing or speaking into a microphone (not supplied). The mixed sound can be recorded on a tape. Use buttons on the unit for the operation. 1 Prepare the source you want to mix. Then, load a recordable tape in deck B and press TAPE A/B repeatedly to select deck B. 2 Press PLAY MODE repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 3 Press the function button of the source you want to record (e.g., CD). When you want to record from TAPE A, press TAPE A/B repeatedly until TAPE A is selected. 4 Press REC PAUSE/START. Deck B stands by for recording. “REC” flashes. 5 Press REC PAUSE/START, and then start singing, speaking or playing the desired source. Recording starts. To stop recording Press x. Note Microphone does not function while the tape deck is performing the AMS operation (page 19). Tips • If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone. • If you want to record your voice through the microphone only, you can do so by selecting the CD function and not playing a disc. • When high level sound signals are input, the system automatically adjusts the recording level to prevent distortion of the recorded sound signal (Auto Level Control function). 24GB Timer Falling asleep to music — Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90MIN t 80MIN t 70MIN t … t 10MIN t OFF * The system automatically turns off in 100 minutes or after the current disc or tape finishes playing. Other operations To Press Check the SLEEP once. remaining time* Change the time SLEEP repeatedly to select the to turn off time you want. Cancel the Sleep SLEEP repeatedly until “SLEEP Timer Function OFF” appears. * You cannot check the remaining time if you select “AUTO”. Note Do not set to “AUTO” during Synchro Recording on a tape. Tip You can use the Sleep Timer, even if you have not set the clock. Waking up to music —Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 10). Use buttons on the remote for the operation. 1 Prepare the sound source you want to play. • CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 14). • Tape: Load a tape with the side you want to play facing forward. • Tuner: Tune in t...
Questo manuale è adatto anche per i modelli :Stereo - MHC-GX250 (497.52 kb)
Stereo - MHC-GX450 (497.52 kb)
Stereo - MHC-GX750 (497.52 kb)
Stereo - MHC-RG555 (497.52 kb)