The system offers the following display modes. Display mode When the system is off, Demonstration The demonstration is displayed. Power Saving The display is turned off Mode1) to conserve power. The timer and clock continue to operate. Clock2) The clock is displayed. 1) You cannot set the clock in Power Saving Mode. 2) The clock display automatically turns to Power Saving Mode after 8 seconds. 18GB Notes on the display information Notes on the display information Characters that cannot be displayed appear as “_”. • The following are not displayed: – total playing time for an MP3 disc and USB device. – remaining playing time for a file. • The following are not displayed correctly: – elapsed playing time of an MP3 file encoded using a VBR (variable bit rate). – folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. • The following are displayed: – remaining playing time for a track. – ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used (ID3 version 2 tag information display has priority when both ID3 version 1 and version 2 tags are used for a single MP3 file). – up to 15 characters of ID3 tag, WMA tag and AAC tag information using uppercase letters (A to Z), numbers (0 to 9), and symbols (” $ % ’ ( ) *+ , –. / < =>@ [ \ ] _ ` { | } !? ^). Changing the illumination brightness To Do this Change the brightness of the illumination around the VOLUME control 1 Press OPTIONS on the unit. 2 Press ./> repeatedly to select “ILLUMI,” and then press ENTER. 3 Press ./> repeatedly to select the desired mode, and then press ENTER. Operations 19GB Using the timers Using the timers Sleep Timer: You can fall asleep to music. Press SLEEP repeatedly. If you select “AUTO,” the system automatically turns off after the current disc or USB device stops, or within 100 minutes. Play Timer: You can wake up to CD, FM/AM reception or USB device at a preset time. Make sure you have set the clock. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/– to adjust the volume. To start from a specific CD track or audio file, create your own program (page 16). 2 Select the timer set mode. Press CLOCK/TIMER SET. 3 Set the play timer. Press ./> repeatedly to select “PLAY SET,” and then press ENTER. “ON TIME” appears, and the hour indication flashes. 4 Set the time to start playback. Press ./> repeatedly to set the hour, and then press ENTER. Use the same procedure to set the minutes. “OFF TIME” appears and the hour indication flashes on the display. 5 Set the time to stop playback. Use the same procedure as in step 4. 6 Select the sound source. Press ./> repeatedly until the desired sound source appears, and then press ENTER. The display shows the timer settings. 7 Turn off the system. Press ?/1. The system turns on 15 seconds before the preset time. If the system is already on at the preset time, the Play Timer will not be activated. Do not operate the system from the time the system turns on until the playback starts. To check the setting 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly to select “PLAY SEL,” and then press ENTER. To cancel the timer Repeat the same procedure as above until “OFF” appears in step 2 of “To check the setting,” and then press ENTER. To change the setting Start over from step 1 of “Using the timers.” 20GB Additional Information Additional Information Discs that this system CAN play • Audio CD • CD-R/CD-RW (audio data/MP3 files) Discs that this system CANNOT play •CD-ROM • CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet • CD-R/CD-RW recorded in multisession that have not ended by “closing the session” • CD-R/CD-RW of poor recording quality, CD-R/CD-RW that have scratches or are dirty, or CD-R/CDRW recorded with an incompatible recording device • CD-R/CD-RW which is finalized incorrectly • Discs containing files other than MPEG 1 Audio Layer-3 (MP3) files • Discs of non-standard shape (for example, heart, square, star) • Discs that have adhesive tape, paper, or sticker attached to them • Rental or used discs with attached seals where the glue extends beyond the seal • Discs that have labels printed using ink that feels tacky when touched Notes on discs • Before playing, wipe the disc with a cleaning cloth from the centre outward to the edge. • Do not clean discs with solvents, such as benzine, thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. On safety • Completely disconnect the power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. • Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified p...

Questo manuale è adatto anche per i modelli :
Stereo - MHC-EX66 (965.58 kb)
Stereo - MHC-EX700 (965.58 kb)
- ()
- ()