valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
Remove your new T1 ToneMatchTM audio engine from the carrying bag and remove its protective cover (page 6). 2. Refer to the Quick Setup Guide and connect your T1 to your L1TM system. 3. Make sure the T1 Master volume control is set to 0 (page 16). 4. Turn on the T1 and then turn on your L1 model II system. 5. Plug your instrument or microphone into the Channel 1 input on the back of the T1 (page 4). 6. Play your instrument or sing into the microphone. Turn the CH 1 Trim control clockwise until the input signal indicator glows green (page 16). 7. Slowly turn the T1 Master volume control up until it is approximately in the 12 o’clock position (page 16). 8. Slowly turn the CH 1 Vol control up until you hear your instrument or microphone (page 16). IMPORTANT! Please make sure you read “Optimizing input gain and output volume” on page 16. This explains how to properly adjust the input trim, channel volume, and master volume controls for the best possible sound. ON Master Trim (CH 1) Vol (CH 1) To shape your sound Rotate the T1 rotary selector to choose a function. Use the display information and control buttons under the display to change the settings (see “Reading the T1 display” on page 18). 1. ToneMatchTM engine: Select a preset designed for your specific instrument or microphone (see “Selecting a Tone- Match™ preset” on page 20). 2. zEQ: Adjust the low/mid/high-frequency bands specific to the selected ToneMatch preset (see “Adjusting zEQ” on page 21). 3. Para EQ: Fine-tune the equalization (see “Adjusting Para EQ” on page 21). 4. Comp/Gate: Add some dynamics controls like compression, limiter, or a gate (see “Using compressor/gate functions” on page 22). 5. Mod: Add a modulation effect like chorus or a flanger (see “Using modulation effects” on page 24). 6. Delay: Add a delay (see “Adding delays” on page 25). 7. Reverb: Add some reverb (see “Adding reverb” on page 26). 8. Reverb Type: Select a reverb type to affect all channels (see “Selecting a type of reverb” on page 27). 9. Prefs: View the status display, which shows you the activated effects on each channel (see “Using the Prefs utilities” on page 28). 10. If you like the sound that you have created, turn the T1 rotary selector to Scenes and save your settings as a new scene. If you don’t like it, try loading one of the five Bose® scenes to use as a new starting point (see “Loading and saving scenes” on page 32 and “Bose scenes” on page 37). The inside of this owner’s guide provides more information on using these features and others not mentioned here. To get the most out of your T1 ToneMatch audio engine, please read this owner’s guide. For additional help, visit SAFETY INFORMATION Please read this owner’s guide Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this owner’s guide for future reference. WARNING: •To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. • The T1 power supply and the T1 ToneMatchTM audio engine shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard. • No naked flame sources, such as lighted candles, should be placed on the apparatus. Notes: • The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats. • The product label is located on the bottom of the product. • The T1 ToneMatch audio engine must be powered only by an L1TM model II power stand or a T1 ToneMatch audio engine power supply. • The mains plug is used as the disconnect device and should remain readily operable. To completely disconnect the apparatus from the mains, disconnect the mains plug from the mains outlet. This product conforms to the EMC Directive 89/336/EEC and to the Low Voltage Directive 73/23/EEC. The complete Declaration of Conformity can be found on ©2007 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding- type plug has two blades and a third grounding prong. The...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - T1 (3 mb)