valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
The red “beat” LED will remain solid alerting you to which input is ready to start. When the music starts again, the Beatkeeper begins right on the beat and indicates how well the two songs are synced within seconds. Syncing To Off Beats Now if you really want to be fancy, you can actually use the Beatkeeper to sync to the off- beats. You can have two songs going “Boom - Cha - Boom - Cha”. Normally, you would sync the “Booms” of both songs (beat-to-beat mixing). But you can also sync the “Boom” of one song to the “Cha” of the other (beat-to-half beat mixing). The Beatkeeper’s Beat Offset graph will display whichever offset is smaller. This allows the DJ the flexibility to mix with the beat or the off-beat. Beat mixing is a skill that must be practiced in order to be proficient at it. 3 and 4-way mixing can be a very difficult skill to master. Visual mixing with the Beatkeeper gives you the tools to help you do this, but nothing replaces practice. Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 13 DM 1835X BEATKEEPER TROUBLESHOOTING T1 The BPM goes way off when using the search button on my high tech CD mixer. Some high tech CD mixers have a cueing feature which allows you to cue precisely to an exact spot in the music so you can slam mix. The only problem is that this mode repeats the first beat of the music at a rate which is unrelated to the actual BPM of the music. As a result, the BPM goes off track. The best way to avoid this is to restart the music after a search, make sure the Beatkeeper is resynced to the music and then press the Cue button on the CD player. The Beatkeeper will remember the BPM and track the music once it starts. T2 The Beatkeeper doesn't resync to the downbeat of the music when the music restarts. Either the downbeat isn't strong enough to be detected, or the music was started well before a strong downbeat. You can easily resync to the downbeat by tapping the Beat Assist button once with the beat. Alternatively you can cue the music to a strong downbeat so that the Beatkeeper starts on this downbeat. T4 Either the BPM display is blank, or it is noticeably off. This is common at the beginnings of songs where the beat is not well defined. To sync simply tap the Beat Assist button two or more consecutive times on the downbeat. The Sync Lock LED turns on automatically, indicating that the Beatkeeper is now tracking the beat of the music. T5 The BPM display is correct, but the beat LED isn't flashing on the downbeats of the music. If this happens tap the Sync Lock button (turning the Sync Lock LED on) and tap the Beat Assist button once to make the Beatkeeper track the downbeat. You can also use this to force the Beatkeeper to track an offbeat for more advanced mixing. Alternatively you may sync manually by tapping the Beat Assist button 2 or more times on the beat. T6 The Beats per minute number seems to jump all over the place. The Beatkeeper is analyzing different sections of the music to find the BPM. If there is a temporary suspension of a distinct beat or if the rhythm is too complex, this number may not follow the actual BPM. a) You can wait for a passage of music with a steady beat for a more accurate BPM indication. b) Hit the Sync Lock button once the red beat LED starts following the beat or c) Tap the Beat Assist button at least twice along with the music beat. Either method (b or c) will cause the Sync Lock LED to turn and lock on, indicating that the Beatkeeper is now tracking the music. T7 It takes too long for the Beatkeeper to find the beat on its own. To speed up the BPM detection process, tap the Beat Assist button at least twice. At this point, the Beatkeeper will turn on the Sync Lock LED, immediately providing a BPM estimate, while resynchronizing to the beat you tapped. Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 14 DM1835X T8 I hit the Sync Lock button, but the flashing red beat LED doesn't seem to follow the beat. This means you hit the Sync Lock button before the red beat LED actually started tracking the tempo. You can easily fix this by tapping the Beat Assist buttons as many times as necessary to resync to the beat of the music. T9 The beat tracking suddenly gets off track. This may happen if the music has several beats missing, or the rhythm suddenly becomes extremely complex or variable. You can either resync the beat using the Beat Assist button or wait a few seconds for the Beatkeeper to automatically recover. T10 The Beatkeeper seems to track the music for a little bit right after using the Beat Assist, and then drifts off. This could be one of two things: a) The Beatkeeper is averaging the time between each of your Beat Assist button taps. If the first tap is way off, the tempo will be way off. b) The Beatkeeper was synced during a section of the music without a well defined beat. In either case, the problem can be overcome by waiting a few seconds before preceding ...