valutazioni - 4, GPA: 3.5
(
)
)
|
Facilità d'uso
1. PLAYLIST - Normal / Title/ Artist / Album / Genre The DATABASE BUILDER can generate "Playlist" for USB device. You can adjust various criteria in order to filter tracks in this setting. You can turn the TRACK KNOB (21) or JOG WHEEL (16) to scroll through the different settings; " Normal / Title/ Artist / Album / Genre". See page 33 Playlist Operation. 2. REPEAT MODE - 3 different modes: Play All Repeat / Folder Repeat / Track Repeat 3. MIDI CH - Setup MIDI Channel from 1 to 16 (Deck A - Mixer - Deck B). 4. MIDI SETUP - • TAP = HOLD/TOGGLE • I/O = Hide/DIS. (Hide/Display MIDI I/O value) 5. CROSSFADER - • LOCK = To lock the crossfader in the middle of the two channels • UNLOCK = The crossfader is back to normal status 6. CROSSFADER REVERSE - • ON = Reverse the crossfader • OFF = Normal Mode 7. DISPLAY TIME - 0.5 ~ 12.0 secs. (Line name start/stop time adjustment) 8. SCROLL SPEED - 50 ~ 2000 msecs. (Adjust the scroll speed of the character display) 9. SENSITIVITY - Touch Wheel Sensitivity adjustment (Adjustment range is -20 ~ +20) A. INTENSITY - VFD Brightness (Brightness Range is 1 ~ 4) B. A.CUE LEVEL - Change the AUTO CUE level (Level range is -36 ~ -78dB) C. LINE SETUP - Select VFD line name and display D. BIT RATE - Display ON/OFF E. VERSION - CXX (Control Version) DSPXX (DSP Version) F. LOAD DEFAULTS - Press the TRACK KNOB (21) to change all settings back to default. G. EXIT & SAVE - Exit & Save your custom settings until you power down. Press the TRACK KNOB (21) to exit & save. NOTE: SAVE: U1/U2, PITCH ON/OFF, PITCH RANGE, SGL/CTN, AUTO CUE, TIME MODE, HOLD, KEY LOCK, EFFECTS ON/OFF, PLAYLIST, REPEAT MODE, MIDI CHANNEL, MIDI SETUP, CROSSFADER, CROSSFADER REVERSE, DISPLAY TIME, SCROLL SPEED, SENSITIVITY, INTENSITY, A.CUE LEVEL, DISPLAY DEFAULTS: U1/U2 (U1), PITCH (OFF), PITCH RANGE (10%), SGL,CTN (CTN), AUTO CUE (ON), TIME MODE (REMAIN), HOLD (OFF), KEY LOCK (OFF), EFFECTS (OFF), PLAYLIST (NORMAL), REPEAT MODE (ALL), MIDI CHANNEL (1-2-3), MIDI SETUP (TAP=HOLD, I/O=HIDE), CROSSFADER (UNLOCK) CROSSFADER REVERSE (OFF), DISPLAY TIME (3sec.), SCROLL SPEED (400ms), SENSITIVITY (0), INTENSITY (4), A.CUE LEVEL (-48dB), BIT RATE DISPLAY (ON) ©American Audio® - - VERSADECK Instruction Manual Page 19 BASIC OPERATIONS 1. LOADING/EJECTING AN USB DEVICE When loading a USB stick, USB card reader, or external hard drive make sure you are correctly lined up with the USB port and connect to the USB port. To disconnect a USB drive, stop playback and disconnect the USB connection. VERY IMPORTANT: PLEASE SEE PAGE 8 FOR DETAILS REGARDING/USING USB DEVICES. CAUTION: • NEVER remove a USB device while in PLAY mode. Figure 7 2. SELECTING TRACKS Select a desired track by using the TRACK KNOB (21). Turn the knob clockwise to move forward a track or counter-clockwise to move back a track. If you want to select a new track during playback (a track is already in play mode) the new track you selected will immediately begin playback as soon as the search operation is completed. You can also push the knob in and turn to jump 10 tracks forward or 10 tracks backward. Figure 9: Turning the track button counter-clockwise will jump back to the previous track. Figure 8: Turning the track button clockwise will skip forward to the next track. ©American Audio® - - VERSADECK Instruction Manual Page 20 BASIC OPERATIONS (CONT.) 3. STARTING PLAYBACK - Figure 10 Load an audio source as described on page 20 (LOADING/EJECTING USB DEVICE). Pressing the PLAY/PAUSE BUTTON (13) with an audio device loaded will immediately start playback. The PLAY (57) indicator will glow as soon as playback begins. The point at which playback starts (cue point) will automatically be stored in the memory as the cue point. The unit will return to this cue point (the point at which playback started) when the CUE BUTTON (14) is pressed. 4. PAUSING - Figure 10 This function pauses playback at the exact same point the PLAY/PAUSE BUTTON (13) was pressed. Pressing the PLAY/PAUSE BUTTON (13) will switch between play and pause modes. When the unit is in pause mode the PAUSE INDICATOR (57) will show in the VFD DISPLAY (23). The blue PLAY/PAUSE BUTTON (13) LED will also begin to flash repeatedly. 5. AUTO CUE This function will automatically set a cue point to the first audio source that is loaded. The first set cue point will always be the beginning of track 1. If a new track is selected before the PLAY BUTTON (13) is pressed, a new CUE POINT will be set to reflect the new starting point. 6. STOPPING PLAYBACK - Figures 10 & 11 Stopping playback will not stop the drive mechanism, but merely pause or cue the track, this functions allows the unit to begin play instantly. The drive mechanism will only stop if a disc is ejected or the unit has gone in to sleep mode. There are two ways to stop (pause) playback: 1) Press the PLAY/PAUSE BUTTON (13) during playback. This will pause play- back at the exact same point the PLAY/PAUSE BUTTON (13) was pres...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - Versadeck (8.31 mb)