valutazioni - 3, GPA: 4.7
(
)
)
|
Facilità d'uso
[INPUT SEL] Key * Set whether to send the A to H input signals [INPUT] or track 9-16 play [TRACK] sounds to the faders of channel faders 9 to 16. 26. [REC ASSIGN-BUSS-SOURCE] Key * Select the channel (SOURCE) to send to the REC BUSS during “BUSS” recording. Select the SOURCE channel with the [CH STATUS/CH SEL] key. * This key lights ON when the SOURCE is selected. 27. [REC ASSIGN-BUSS-REC TRK] Key * The track (READY) to record in “BUSS” recording is selectable when this key is flashing. Set READY track with the [CH STATUS/CH SEL] Key. * This key lights ON when the READY track is set for “BUSS” recording. 28. [REC ASSIGN-DIRECT-REC TRK] Key * The track (READY) record in “DIRECT” recording is selectable when this key is flashing. Set READY track with the [CH STATUS/CH SEL] key. * This key lights ON when the READY track is set for “DIRECT” recording. 29. [DISP SEL/TIMEBASE] Key * This key is used to alternate the menu shown on the LCD in the following order. * The tracks recorded vary, as shown below, according to the connection jack. a. Current location of TIME BASE selected Shows the current location of the sound. b. REMAINING TIME BASE Selected (time remaining) Shows the time remaining and space available on the disk for recordings (in terms of mono track). c. MTC Time Input Shows the MTC time input in the [MIDI IN] jack. This is a convenience for operations as a slave device. * The user can switch between time bases, as shown below, by pressing the [DISP SEL/TIME BASE] key, while the [SHIFT] key is depressed. a. ABS (Absolute Time) Indication An absolute time base from 00H 00M 00S (ABS 0) to 24H 00M 00S. b. BAR/BEAT/CLK (Bar) The “Bar, Beat, Clock” of the beat and tempo set with the internal tempo map. c. MTC (MIDI Time Code) Display of the MTC time setting. 30. [PGM SEL] Key * This is used to switch between programs 01 to 99. This is also used to create new programs. 31. [SETUP] Key * This is used to go into the setup mode to set various parameters of the recorder and mixer. 17 32. [AUTO RTN-START/MARK1] Key * This key is used to CHECK/CHANGE the parameters saved at the start point (AUTO RETURN START POINT) when executing auto return or auto repeat. * Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK1]. * This can be used as Locate Memory. 33. [AUTO PUNCH-IN/MARK2] Key * This key is used to CHECK/CHANGE the parameters saved at the recording start point (PUNCH IN POINT) when executing auto punch in/out, paste or erase. * Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK2]. * This can be used as Locate Memory. 34. [AUTO PUNCH-OUT/MARK3] Key * This key is used to CHECK/CHANGE the parameters saved at the recording end point (PUNCH OUT POINT) when executing auto punch in/out or erase. * Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK3]. * This can be used as Locate Memory. 35. [AUTO RTN-END/MARK4] Key * This key is used to CHECK/CHANGE the parameters saved at the end point (AUTO RETURN END POINT) when executing auto return or auto repeat. * Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK4]. * This can be used as Locate Memory. 36. [CLIPBOARD-IN/MARK5] Key * This key is used to CHECK/CHANGE the parameter saved at the start point (CLIPBOARD IN POINT) when copying from or pasting to the clipboard. * Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK5]. * This can be used as Locate Memory. 37. [CLIPBOARD-ALIGN SEL/MARK6] Key * This key is used to CHECK/CHANGE the parameter saved at the align point (ALIGN POINT) when copying/pasting or moving/pasting. * Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK6]. * This can be used as Locate Memory. 38. [CLIPBOARD-OUT/MARK7] Key * This key is used to CHECK/CHANGE the parameter saved at the end point (CLIPBOARD OUT POINT) when copying from or pasting to the clipboard. * Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK7]. * This can be used as Locate Memory. 39. [A RTN/A PLAY/SCENE SEQ.] Key * Every time this key is pressed the mode switches from Auto Play -> Auto Return -> Auto Repeat -> OFF, and this mode is shown on the LCD. AUTO PLAY AUTO RETURN AUTO REPEAT OFF * Press this key while the [SHIFT] key is depressed to turn ON/OFF the scene sequence. When scene sequence is switched “on”, the normal display section “S**” will change to reversed black and white display. 40. [HOLD/>] Key * This key is used to hold the parameter (time or BAR/ BEAT/CLK) when the key is pressed. The parameter is simultaneously displayed and is editable. * When this key is pressed at editing of the value, the digit can be moved to the right or below, and if this key is pressed while pressing on the [SHIFT] key, it can be moved to the left or above. 41. [STORE] Key * This key is ...