valutazioni - 1, GPA: 3
(
)
)
|
Facilità d'uso
Please read this Owner's Manual carefully. It contains valuable information which will help you use the unit to maximum effectiveness. Features • Fifteen watts (rms) of output from a high-performance, full-range speaker designed for digital audio. • A choice of two input jacks (high-gain/low-gain) to match instrument output levels. • A LINE IN jack for monitoring tape recorders, stereo equipment, and other external audio sources. • A LINE OUT jack for connection to recording equipment, PA mixers, and other audio equipment; • A headphone jack for private listening through standard monaural or stereo headphones. Control Panel (1) INPUT jacks (H I/LOW) — Provides a choice of a high-gain circuit for weak inputs and a low-gain circuit for stronger ones. (2) LINE IN jack — Accepts input from external audio sources. (3) TREBLE/BASS knobs — Control the tone of the output for the high and low ranges. Turning the knob clockwise increases the amount of amplification added; counterclockwise rotation decreases it. (4) PHONES jack — Accepts the standard headphone plug. Plugging in a set of headphones automatically disconnects the monitor speaker — for private listening. (5) LINE OUT jack — Provides output for a tape recorder, mixer, or similar equipment. (6) VOL knob — Controls the overall volume. Turning the knob clockwise raises the volume; counterclockwise rotation decreases it. (7) POWER switch — Controls power to the unit. The pilot lamp next to the switch lights when the unit is in operation. Note: If there is noise or humming, try reversing the plug in the electrical outlet. (D (D (D (D © Ô Ô O ^ D/"1 ® © ZT DOFF TREBLE BASS VOL -1-1 © ® © HI LOW LINE IN LINPUTJ PHONES POWER © LINE OUT Operation (1) Rotate the volume knob fully courttercloskwise to cut ail output. (2) Turn on the instrument and plug it into the appropriate INPUT jack {HI/LOW). (3) Make sure that the power switch is in the OFF position and then connect the unit to the electrical outlet. (The pilot lamp should light.) (4) Rotate the volume knob to adjust the output volume. (5) Adjust the tone with the TREBLE and BASS controls. Warnings (1) Keep the amplifier away from neon or fluorescent light fixtures and other potential noise sources. (2) Always reduce the volume to zero before connecting or disconnecting the power. Otherwise the high volume might overload the speaker and damage it. (3) Plug the cord into the instrument first and then into the amplifier. Disconnect in the reverse order. (4) Protect the amplifier from physical shocks and impact. Never move it while it is in operation. (5) Shield the unit from moisture and dust. (6) Clean the case with a cloth and possibly a mild detergent. Never use harsh cleansers or organic solvents. Main Specifications Output Speaker Input jacks Output controls Output jacks Dimensions Weight 15 watts (rms) Full-range, 10 cm speaker High-gain, low-gain, and line inputs Volume, bass, and treble Headphones and line output 195 x 222 x 156 (mm) 3.5 kg OM702E Printed in Japan...