valutazioni - 4, GPA: 3.5 ( )

Produttore : Yamaha File Size : 3.51 mb File Nome : Lingua di insegnamento:

The currently set MIDI receive channel will appear on the display. 3. Use the / button to select a MIDI receive channel (1 – 16, All, oF). * With the “All” setting omni is set to on. Set the MIDI Merge If you want the MIDI signal received by the DG amplifier’s MIDI IN jack to be transmitted on to other MIDI devices via the DG amplifier’s MIDI OUT jack, set the MIDI Merge to “on” (ON). If you don’t want the data to be transmitted, set to “oF” (OFF). 1. Press and hold the button for more than one second. The “UTIL.” mode display will light. 2. Press the button.The currently set MIDI merge setting will appear in the display. 3. Use the / button to select either “on” or “oF”. MIDI Bulk Out You can back up the data stored in the DG amplifier’s internal memory by saving the data to an external MIDI storage device (Yamaha MDF3, etc.). 1. With a MIDI cable, connect the DG amplifier’s MIDI OUT jack to the MIDI IN jack on the external MIDI storage device. 2. Press the button for more than one second. The “UTIL.” mode display lamp will light. 3. To transmit all memory (128 memory, plus Utility setting data) with the Bulk Out operation: > Press the button. “All” will appear in the display. To transmit a single memory: > Press the button. Use the / button to select the memory number (1 – 128, All) that you want to save with the Bulk Out operation. * When “All” is selected in the Bulk Out operation, all memory data (128 memory) will be transmitted. 4. Press the button to execute the Bulk Out operation. Press the button to cancel the operation. * The device number is the same as that of the MIDI receive channel. If the MIDI receive channel is set to “All” (Omni ON) the device number will be 1. MIDI Cable DG amplifier Rear Panel External MIDI Device MIDI IN MIDI OUT ¦ MIDI Bulk In With a MIDI cable, connect the DG amplifier’s MIDI IN jack to the MIDI OUT jack on an external MIDI device. Return your MIDI back up data to the DG amplifier. * The MIDI Bulk In operation is carried out in the AMP or EFFECT modes only. It can not be carried out in the Utility Mode. * The device number is the same as that of the MIDI receive channel. If the MIDI receive channel is set to “All” (Omni On), the MIDI channel will be set to 1. The DG amplifier will not receive data if the MIDI channel is set to “oF” (OFF). * “Ld” is shown on the display while the MIDI Bulk In operation is being executed. 13 Speaker Simulator ON/OFF The DG amplifier’s speaker simulator provides the line signal with a realistic simulation of the natural sound of a speaker. The speaker simulator can be used on the line signal when the LINE OUT jack is connected to a mixer or recorder. 1. Press the button for more than 1 second. The “UTIL.” mode display lamp will light. 2. Press the button. The current setting will be shown on the display. 3. Use the / buttons to select either “on” or “oF” (ON/OFF). Set the Volume Pedal Position Set the position for where control of the volume, via MIDI, will take place. (Refer to the “Using MIDI to Control Volume” section on page 11 for more information on Volume Pedal Position.) 1. Press the button for more than 1 second. The “UTIL.” mode display lamp will light. 2. Press the button. The current setting will be shown on the display. 3. Use the / buttons to select the volume control position (bP, Ap, Ar). MIDI Transmission/Reception between DG series amplifiers. You can use the MIDI bulk out/bulk in functions to copy memory and utility setup data from one DG series guitar amplifier (DG100-212A/DG80-210A/ DG80-112A/DG130HA) to another. * Make sure the receiving DG amplifier is in the AMP mode or EFFECT mode. EX.) Copy the memory from a DG100-212A to a DG130HA. MIDI Bulk Out DG100-212A Rear Panel MIDI Cable MIDI Bulk In DG130HA Rear Panel MIDI OUT MIDI IN Utility Mode STATUS DATA/CTRL BANK MSB/MAX BANK LSB/MIN TOGGLE ON-OFF /NUMBER OF PGM DEC /NO INC /YES MEMORY EDIT PC EDIT WRITE /EXIT ±10 8.8.8. DG amplifier Rear Panel MIDI Cable External MIDI Device MIDI IN MIDI OUT DG100-212A/DG80-210A/DG80-112A/DG130HA Error Messages If an error occurs during operation, one of the following error message numbers will appear on the display. E1: Motor Drive Error CAUSE: The volume knob has not returned to its assigned position after 20 seconds has elapsed from the start of the recall operation or, the device does not recognize the recall command. SOLUTION: Turn off the power and return the device to the music dealer where you purchased it, or to the nearest Yamaha Service Center for repair. E2: MIDI Receive Buffer Full CAUSE: Too much MIDI data is being received by the DG amplifier at one time. SOLUTION: Try reducing the amount of data being sent or, break the data into smaller blocks. E3: Communication Error. CAUSE: An abnormality is detected during MIDI communications. SOLUTION: Check all connections, etc. and try again. E4: Bulk Receive Check Sum Error. CAUSE: The check sum does not match the received MIDI bulk data. SOLUTION: Check all connectio...

Scarica la tua

Per scaricare, digitare 2 cifre :