valutazioni - 2, GPA: 5 ( )

Produttore : B.C. Rich File Size : 428.44 kb File Nome : Lingua di insegnamento:

The purpose of the Blend Control is to be able to select pickups (bridge or neck) and also to be able to blend them together. Turning the knob counterclockwise will bring more of the neck pickup into the mix. Turning it clockwise will bring more of the bridge pickup into the mix. Setting the Blend Control knob in the middle (there is a middle detent position) will place each pickup evenly in the mix. • #3 is the Bass Boost/Cut Control. It controls the amount of bass (low end) output of the instrument. Turning the knob clockwise will add bass. Turning the knob counterclockwise will decrease the bass output. Once again, there is a center position that will set the bass EQ flat (no cut or boost). • #4 is the Treble Boost/Cut Control. It controls the amount of high-end output of the instrument. Turning the knob clockwise will add treble. Turning the knob counterclockwise will decrease the treble output. Once again, there is a center position that will set the treble EQ flat (no cut or boost). 3 Climate, Humidity and Your Guitar Damage done to an instrument as a result of too little, or too much, humidity is not covered by the manufacturer's warranty. Cracks resulting from a lack of humidity are not due to a manufacturing defect, but are considered neglect, and educating yourself could save you some heartaches...and expense. Do not leave your instrument in a hot car, direct sunlight, near a stove, heater, an attic or other area where the temperatures are high. Cold temperatures can also damage your guitar. If you must take your instrument out in the cold, let it warm back up before taking it out of the case.This will keep the finish from cracking or clouding. It will also keep your fretboard from drying out and cracking. Cleaning Like all fine instruments, your B.C. Rich requires periodic care and maintenance. One of the most important ways to maintain the beauty of your instrument and prolong its string life is regular cleaning. Perspiration can actually contain acids that are corrosive to the strings as well as the metal parts of the guitar. After playing, wipe down your instrument's finish, strings, fretboard, and metal parts (bridge, tuners, etc.) with a soft cloth.The finish should be polished only as needed to avoid polish build-up that will dull the appearance. When you do need to polish, use a soft treated cloth or cotton rag. Also, only use a polish formulated for musical instruments to avoid build up. Follow these simple steps and your instrument should shine for years to come. Bridge Adjustments Bronze Series Guitars The Bronze Series Guitars have a one-piece adjustable bridge. These are adjusted by turning the two screws on each side of the bridge with a flathead screwdriver until the desired height is achieved. Loosening the strings before adjustment will keep the screws from becoming scratched or blemished. Platinum,Acrylic, Exclusive, and Classic Series Guitars The Tune-O-Matic Bridge is adjusted by turning the two finger screws on each...

Scarica la tua

Per scaricare, digitare 2 cifre :