valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
These functions and parameters are marked by an [880] symbol. If MIDI messages marked by an [880] symbol are transmitted to another GS format sound module oder to the SC-88/88Pro, these messages will not be recognized. In addition, functions and messages which were added to the SC-88 (and not found on previous GS format sound modules) are marked by an {88] symbol, and functions and parameters which were added to the SC-88Pro (and not found on the SC-88) are marked by a [Pro] symbol. The SC-880 receives the lower byte of the Bank Select message (control number 32) to switch the Tone Set When the lower byte of the Bank Select message is 00H, the Tone Set specified in Tone mode will be selected. A lower byte of 01H will select Tone Set 1, 02H will select Tone Set 2, and 03H will select Tone Set 3. 4 Some other GS devices do not recognize the Bank Select LSB (Controller number 32). The SC-880 receives the upper byte of the Bank Select message and the Program Change to select Patches oder Performances. Section 1. Receive data ■ Channel Voice Messages • Note off Status 2nd bvte 8nH 9nH kkH kkH 3rd bvte wH ООН n = MIDI channel number: kk = note number: vv = note off velocity: OH-FH (ch.l-ch.16) ÖÖH-7FH (0-127) 00H-7FH (0-127) * For Rhythm Parts, these messages are received when Rx.NOTE OFF = ON for each Rhythm Tone. 4 The velocity values of Note Off messages are ignored. * Not received when Control Channel « OFF. (Initial value is OFF) (S. 95) * Bank Select messages correspond to Patches as follows. Bank Select 1 Program No I Group I Pate MSB PC# I 80 81 0 - 127 0 - 127 Preset Patch User Patch 001 - 128 001 - 128 * In the case of PC# by itself, the Patch of the currently selected type (Preset, User) will change. * Bank Select messages correspond to Performances as follows. Bank Select MSB Program No PC# Group Perf. No. 96 97 0-7 0-7 Preset Performance User Performance 001 - 008 001 - 008 In the case of PC# by itself, the Performance of the currently selected type (Preset, User) will change. • Note on Status 2nd bvtC 9nH kkH 3rd by te wH О Modulation (Controller number 1) Status 2nd bvte 3rd bvte BrtH 01H wH n « MIDI channel number: kk = note number, w = note on velocity: OH-FH (ch.l-ch.16) 00H-7FH (0-127) 03H-7FH (1-127) Not received when Rx.NOTE MESSAGE - OFF. (Initial value is ON) For Rhythm Parts, not received when Rx.NOTE ON = OFF for each Rhythm Tone. n == MIDI channel number: w я Modulation depth: OH-FH (ch.l-ch.16) OOH-7FH (0-127) * Not received when Rx.MODULATlON = OFF. (Initial value is ON) * The resulting effect is determined by System Exclusive messages. With the initial settings, this is Pitch Modulation Depth. Polyphonic Key Pressure 2nd bvte 3rd bvte AnH kkH wH O Portamento Time (Controller number 5) Status 2nd bvte 3rd bvte BnH 05H wH n = MIDI channel number OH-FH (ch.l-ch.16) kk = note number: OOH-7FH (0-127) w = key pressure: 00H-7FH (0-127) * Not received when Rx.POLY PRESSURE (PAf) ~ OFF. (Initial value is ON) * The resulting effect is determined by System Exclusive messages. With the initial settings, there will be no effect. * Control Change * When Rx.CONTROL CHANGE = OFF, all control change messages except for Channel Mode messages will be ignored. * The value specified by a Control Change message will not be reset even by a Program Change, etc. O Bank Select (Controller number 0, 32) Status 2nd bvte 3rd bvte BnH 00H mmH BnH 20H 11H n » MIDI channel number: w = Portamento Time: OH-FH (ch.l-ch.16) 00H-7FH (0-127), Initial value = ООН (0) * This adjusts the rate of pitch change when Portamento is ON oder when using the Portamento Control A value of 0 results in the fastest change. O Data Entry (Controller number 6,38) Status 2nd bvte 3rd bvte BnH 06H mmH BnH 26H 11H n = MIDI channel number: OH-FH (ch.l-ch.16) mm, 11 = the value of the parameter specified by RPN/NRPN mm = MSB, 11 = LSB O Volume (Controller number 7) Status 2nd byte 3rd byte BnH 07H wH n = MIDI channel number: OH-FH (ch.l-ch.16) mm = Bank number MSB: 00H-7FH (GS Variation number 0 -127), Initial Value = 00H 11 - Bank number LSB: 00H - 03H (Tone Set), Initial Value - 00H * Not received when Rx.BANK SELECT = OFF. „Rx.BANK SELECT" is set to OFF by „Turn General MIDI System On", and set to ON by ,,GS RESET". (Power-on default value is ON.) * When Rx.BANK SELECT LSB = OFF, Bank number LSB will be handled as OOH regardless of the received value. However, when sending Bank Select messages, you have to send both the MSB (mmH) and LSB (llH, the value should be OOH) together. * Bank Select processing will be suspended until a Program Change message is received. * The GS format „Variation number" is the value of the Bank Select MSB (Controller number 0) expressed in decimal. =* MIDI channel number: =* Volume: OH-FH (ch.l-ch.16) 00H-7FH (0-127), Initial Value » 64H (100) * Volume messages are used to adjust the volume balance of each Part. * Not rece...