valutazioni - 4, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. As shipped, the DB-90’s battery is not yet installed. Be sure to read “Changing the Battery” and then follow the instructions to install the battery. Copyright © 2005 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. Main Features . Large backlit LCD panel, easy-to-follow and highly visible pendulum-style tempo indicator . PCM count sound plus internal drum sounds In addition to high-quality PCM count sounds, human voice and drum sounds are also provided as metronome sounds. . Note Mixing function The four different rhythms (quarter-note, eighth-note, sixteenth-note, and triplet) and accent volume are completely adjustable, allowing you to create original rhythm styles quickly and easily. . Loop Play You can call up stored metronome settings in predetermined sequences, and have them play for a specified number of times. This gives you the freedom to practice using various combinations of rhythms as well as irregular rhythms. . Amp Simulator The DB-90 is equipped with an input jack, which allows you to connect your guitar or bass directly to the unit and do rhythm training with the metronome. Also featured is an amp simulator function, which allows you to use the DB-90 as a simple monitor amp. . Includes Rhythm Coach function, perfect for individualized practice The DB-90 features a Rhythm Coach function, which provides effective rhythm training using trigger pads and the DB-90’s internal mic. . Count In function You can set the metronome to give a lead-in count before the metronome count itself starts. . Reference Tone function The DB-90 includes a chromatic sound generating function, which produces tones in a five-octave range (C2-B6). . Memory function The memory is capable of storing 50 different metronome settings and ten reference tone settings. . START/STOP jack You can connect an FS-5U (or FS-6) pedal to the START/STOP jack and start and stop operation with the pedal. . MEMORY UP/DOWN jack An FS-5U (or FS-6) pedal can be connected to the MEMORY UP/DOWN jack and then used to shift up and down through the memories and make your selection. . MIDI IN Connector You can connect an external MIDI device to the MIDI IN connector, synchronize to and display the tempo for the external device, and use the device to start and stop the metronome. ¦ Printing convertions in this manual Text or numerals enclosed in square brackets [ ] indicates buttons; i.e. [TAP]...TAP button Panel Descriptions 1. [POWER] Turns the power on and off. * Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction. [LIGHT] Switches the backlit on and aff. [MUTE] Mutes the sound being played. * The Mute status is not stored in memory. [WRITE] Used when storing settings to memory. [MEMORY] Switches the memory number. [MIDI] Swtiches the unit to MIDI mode. 2. TEMPO/VALUE dial Changes the tempo and the setting values. 3. MIC You can practice rhythms with the DB-90 set to respond to the sound from drums, practice pads, and other mic input. You can use this in Coach mode. 4. [START/STOP] Starts and stops the metronome, Loop Play, reference tone and Rhythm Coach. 5. [TAP] Sets the metronome tempo. * This setting is ignored in Loop Play mode, Reference Tone mode, and MIDI mode. 6. [TEMPO] Changes the tempo. [LOOP] Switches the unit to Loop Play mode. [TUNE] Switches the unit to Reference Tone mode. Changes the note name. [COACH] Switches the unit to Coach mode. Press the button to switch among the four practice modes. [BEAT/PATTERN] Switches between metronome Beat and Pattern. [VOICE] This changes the tone used for the Beat you select. * This does not change the tone when Patterns are selected. [PITCH] Switches the unit to Reference Tone mode. Changes the reference pitch. [TRIG/GUIDE] Switches the unit to Coach mode. Set the pad sensitivity and Time Check difficulty settings here. 7. Rhythm Level sliders Adjust the volume of the accent on the first beat and the volume of each rhythm. * This setting is enabled in Metronome mode (excluding the count-in operation), and MIDI mode. 8. Master Volume slider Adjusts the overall volume. * The master volume setting is not stored in memory. 9. Display Information in the display is changed depending on the modes. 10. Tempo indicators Light in time with the tempo. 11. MIDI IN connector Used to conn...