valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
Remember that the Footswitch assignment can be saved to a Performance Memory. Here are the functions the optional DP-2, DP-6, or Boss FS-5U connected to the FOOT SWITCH jack can perform: Parameter Explanation Start/Stop Starts and stops Arranger playback. Same function as [START/STOP], Play/Stop Starts and stops Recorder playback. Same function as the Recorder [PLAY ►]. Intro Selects the Intro of the current Style Type during Arranger playback. Same function as [INTROI. Ending Selects the Ending of the current Style Type (Basic or Advanced). Same function as [ENDING], Fo/Fv Triggers either the To Original or To Variation fill, depending on whether the Original or Variation Division is currently active. Upon completion of the Fill, the Arranger will play the Division selected by the Fill. B sc/Ad v Selects either the Basic (Bsc) or Advanced (Adv) Type, depending on which one is active at the time you press the footswitch. Same function as [BASIC] and [ADVANCED], Org/Var Selects either the Original or Variation Division of the currently active Type, depending on which one is active at the time you press the footswitch. Same function as [ORIGINAL] and [VARIATION]. Inversion Switches the Inversion function on and off. Kbd Rec Allows you to switch the keyboard recognition on and off. When off, the notes you piay in the chord recognition area of the keyboard no longer cause the Arranger to play another chord. Works well for long arpeggios when the Arranger and Realtime zones (partially) overlap. Prf Up Selects the next Performance Memory (i.e. A12 if A11 is currently active). Mote: Seeing that the footswitch function can also be saved to a Performance Memory, the memory you select using the footswitch in Prf Up mode may contain another footswitch assignment so that you can no longer select the next Performance Memory (i.e. A13) by foot. Fade Out Starts the Fade Out. Same function as [FADE OUT] on the front panel. Portamento Switches the Portamento function (see page 32) on and off. Soft In this case, the footswitch functions as Soft pedal (a pedal found on grand and digital pianos that reduces the volume). Note: This function only works for the Realtime parts. Sostenuto In this case, the footswitch functions as Sostenuto pedal (another pedal found on grand and digital pianos that allows you to sustain only those notes you played at the time you pressed the pedal). Note: . This function only works for the Realtime parts. Hold The footswitch has the same function as a DP-2, DP-6, or Boss FS-5U connected to the SUSTAIN FOOTSWITCH jack. 35 G-800 Reference Manual Param\Cntrl\4 page: Expression pedal Part Status Down Up i u PflRflM » 4 H751 1 m ■ paa i 1ST bal sTune II % • M- 3Cntrl n---I E EX it [7 u es EXPRES SION PEDAL D Master page: [F2] (Param)-> [F3] (Cntrl) [PAGE] AfW (select page 4) Part The first parameter on this page is used to select the Realtime (UP1, UP2, LWR, MBD, or MDR) or Arranger part (ADR, ABS, AC1-AC6) whose Expression settings you wish to edit. Note: There is no need to set these parameters if you don’t have an EV-5 or EV-10 Expression pedal connected to the EXPRESSION PEDAL jack. Status (Realtime part & Arranger parameter) Select Of! if you wish to control the selected part’s volume by foot, or Off if you don’t want the selected part’s volume to change whenever you use the Expression pedal. Up (0-127) The value you set here is the Expression volume (CC11) value that the selected part will have whenever the Expression pedal is closed (minimum setting). In fact, this parameter duplicates the function of the knob at the left side of an EV-5, for example. Down (0-127) The value you set here represents the maximum volume you can achieve for that part by fully depressing the Expression pedal (maximum setting). Note: It is perfectly possible to set the Up value to “127” and the Down value to “0”, so that the corresponding part will only sound when the Expression pedal is up (closed). Param\Cntrl\5 page: Extra Bender Controller (Realtime parts) This display page is entirely devoted to the Extra Bender settings. Before explaining the parameters, we’d like to draw your attention to the fact that you can set the Value of several available parameters, so that the Extra Bender allows you to control several parameters simultaneously. Therefore, do not forget to scroll through all the options and set their Value to zero to turn off the Extra Bender function for the selected Realtime part. pi □ Part _Parameter_ Value BÍ3-1 ¡-Pitch ea liGlbal III 5 1 ■ i ETune -•= • 13 cntrl! □BIS □ S 1 EXTRA BENDER CONTROLLER - i [EEXitni 36 Parameter mode, Param\Cntrl\5 page: Extra Bender Controller (Realtime parts) O Master page: [F2] (Param)-> [F3] (Cntrl) [PAGE] ATV (select page 5} Part (UP1, UP2, LWR, MBS, MDR) This parameter allows you to select the Realtime part whose Extra Bender settings you wish to edit. Parameter The Extra Bender has the same ef...