valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
However, if the damper ON message has been recognized, these ON notes will be not turned OFF until the Damper OFF message is received. OMNI OFF Status Second Third BnH 7CII 00! I OMNI ON Status Second Third BnH 7DH 00H MONO Status Second Third BnH 7EH Omll POLY Status Second Third BnH 7FH 00H These Mode Messages (2nd byte =123 —127) are also recognized as ALL NOTES OFF. Mode Messages are recognized as follows : POLY ON <127) MONO ON (126) mmrnm= 1 MONO ON (126) mmmm * 1 OMNI OFF (124) OMNI * OFF OMNI “OFF OMNI=ON POLY POLY POLY OMNI ON (125) OMNI =* ON OMNI=ON OMNI =* ON POLY POLY POLY ■ Exclusive Status F0H : System Exclusive F7H : EOX (End of Exclusive) Refer to Section 4. ■ Active sensing Status FEH : Active Sensing 3. BASIC CHANNEL SETTING When the power is first applied, the Basic Channel is normally set to 1, and the receiver is set to MODE 3 (OMNI OFF, POLY ON). However, the Basic Channel may l>e changed when the following key on the keyboard is pressed while the TRANSPOSE. MIDI switch is held down. The receiver will be set to the MODI- 3 (OMNI OFF, POLY ON). When the highest key (G7 : HP-GOO 700.C8 : HP-800) on the keyboard is pressed while the TRANSPOSE/ MIDI switch is held down. The Ha sic Channel will be set to 1, and the receiver is set to the MODE 1 (OMNI ON, POLY ON). HP-600/700 Power-on El FI F# 1 G1 G# 1 A1 A#1 B1 C2 C#2 D2 D#2 E2 F2 F#2 G2 G7 HP-800 Ke* Power —on A0 A#0 B0 Cl C#1 DJ D# 1 El FI F#1 G1 G#1 A1 A# 1 131 C2 C8 Basic Channel OMNI 1 OFF 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF 6 OFF 7 OFF 8 OFF 3 OFF 10 OFF II OFF 12 OFF 13 OFF 14 OFF- 15 OFF 16 OFF 1 ON Basic Channel OMNI 1 OFF 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF. 6 OFF 7 OFF 8 OFF 9 OFF 10 OFF 11 OFF 12 OFF 13 OFF 14 OFF 15 OFF 1G OFF I ON 7 4. MULTI TIMBRE MODE If ihe power has been applied while the PIANO 2 switch is held down, or the System Exclusive Message (Multi Timbre ON) has been received, the HP—600/700 / 800 turns to MULTI TIMBRE MODE. Also, if the power is applied again while no switchs or any except PIANO 2 are held down, or the System Exclusuve message (Multi Timbre OFF) has been received, the HP—600, 700/800 returns from this mode. The Exclusive Messages are following. Multi Timbre ON F0H Status of System Exclusive 4IH Roland ID 00H Device ID 1AH Model ID 1211 Command ID (dataset) 00H Address (msb) 00H (tsb) - multi timbre wH Data vv=01H-7FH ssll Sum ss : (ЮН+00Н +vvM + ssH-0 F7II EOX End of Exclusive Multi Timbre OFF F0H Status of System Exclusive 41H Roland ID ООН Device ID IAH Model ID 1211 Command ID (dataset) 00H Address (msb) ООН (Isb) -multitimbre 00H Data 00H Sum F71I EOX End of Exclusive Data ООН is recognized as return from Multi Timbre. Data 0111 — 7FII is recognized as turn to Multi Timbre. Transmit and receive channels are followig Tone Channel PIANO 2 1 Chorus Receive chorus 1/2 ON or OFF messages in channel 1,11,12 and 13. The last ON /OF message received has priority. Transmit chorus 1/ 2 ON or OFF messages in channel fixed upon each Tone. When the CHORUS 12 switch is pressed while the TRANSPOSE/MIDI switch is held down, chorus 1/2 ON or OFF message is sent. Damper Pedal, Soft Pedal and Sostenuto Pedal can be recognized individually as manual and MIDI message. Program Change, Mode Message NO'F transmitted and CAN NOT be recognized Program Change. CAN NOT be recognized Mode Messages, always in Mode 3 (omni off poly). HARPSICHORD VIBRAPHONE E.PIANO 11 12 13 Pedals Basic Channel Basic Channel CAN NOT be changed. IBRoland* 10988 10988 Roland 10981...