Receive MIDI channel can be set to 1,11,12 or 13. The messages received last has priority. Also, the chorus effect on the piano affects all the four voices at the same time. The Chorus ON/OFF messages are sent on the MIDI channel used in the voice currently selected on the piano. In Multi Timbre mode, Program Change messages are not sent or received. 14 7. Local ON/OFF Usually, MIDI devices, including the Roland Piano, are not intended to transmit MIDI messages received at MIDI IN to MIDI OUT. However, MIDI sequencers are provided with the SOFT THRU function that enables to do that. The Soft Thru function can be effective when using a MIDI Keyboard Controller and a separate MIDI sound module with a sequencer. That is, to record keyboard performance from a keyboard controller into a sequencer, and play it using the sound module, you connect the sound module to the MIDI THRU on the sequencer, play the keyboard controller, then disconnect it from the MIDI THRU, and connect it to the MIDI OUT of the sequencer to play it back. Such complication can be resolved by the Soft Thru function. Simply turn Soft Thru on, connect the sound module to the MIDI OUT on the sequencer, and you can record and playback without changing the setups. The Soft Thru function, however, must not be on when using the sequencer with a Roland Piano type keyboard that contains both the keyboard and a sound moude in it. If the Soft Thru on the sequncer is set to ON, the piano stutters, or the maximum voices are reduced. This is because the same performance information travels to the sound module section of the piano through the internal connection (0) and via sequencer (@). Most of the sequencers are default to SOFT THRU OFF, and therefore free from the above trouble. However, if the sequencer cannot be set to SOFT THRU OFF, you can set LOCAL OFF on the piano by setting the Local Switch on the piano to the ":" position. LOCAL ON may be called a normal condition (0 route is connected). • position —» LOCAL ON : position —> LOCAL OFF * Unless a MIDI cable is connected to the MIDI IN connector on the piano, LOCAL OFF cannot be set. MIDI IN ГЖД1 Key Sound board Module Memory Roland Piano MIDI recorder (sequencer) ® LOCAL SWITCH (D SOFT THRU SWITCH * These switches do not mechanically exist. These are the functions engaged in the software. 15 APPENDIX MIDI Channel, Program Change and Key Transpose correspond to the keyboard as shown below. HP-800 -MIDI CHANNEL- -PROGRAM CHANGE- 113|4|6|8|9|11|13|15|16| I /fl|2|3|4|5|6|7|8| |A_ /NUMBER 1 -8 /GROUPA. В KEY ["TRANSPOSE! II III II III II III II III II III II III II III ABODE F BANK 1 8 HP-600/700 -MIDI CHANNEL I-MIDI CHANNEL-. r—PR ílllillllÉ [2|4 бЫэтпзЫиб! Il 121 : PROGRAM CHANGE Д KEY 'TRANSPOSE! /111 |2[3|4|5|6|7l8| IA /NUMBER 1—8 "/GROUP A, BANK 1 ~-8 Sound Range Diagram 16 SPECIFICATIONS Keyboard HP-800: 88 Keys HP-700: 76 Keys HP-600: 76 Keys (light action) Sound Source SA Sound Maximum number of voices 15 voice polyphonic Preset Voices Piano 1,2, Harpsichord, Vibraphone, Electric Piano Effects Chorus 1,2 (ON/OFF) Connectors Output Jacks (Mono, Stereo) Input Jacks (Mono, Stereo) Damper Pedal Jack Soft Pedal Jack MIDI IN Connector MIDI OUT Connector MIDI THRU Connector Switches Power Switch Speakers 16cm x 2 Output HP-700/800: 15W x 2 HP-600 : 8.5W x 2 Finish Roland Original Oak Dimensions HP-800 : 1318(W) x 407(D) x 126(H) mm/51x 16" x 4-^he" HP-600/700: 1155(W) x 407(D) x 126(H)mm/45-V2'' x 16" x 4-is/ie" Weight HP-800: 34.5 kg/76 lb 30z HP-700: 30.5 kg/67 lb 50z HP-600: 19.5 kg/43 lb 10z Consumption HP-700/800: 45W (117V), 85W (220/240V) HP-600 : 30W (117V), 45W (220/240V) Accessories Music Rest, Power Cord, DP-6 (for HP-600) Options Stand: KS-800 for HP-800 KS-700 for HP-700 KS-600 for HP-600 Pedal Switch: DP-6, DP-2 '87-5-CHF1-1S UIU1IAL .NANU Date : May. 1.1987 HP-600/700/800 MIDI Implementation Chart version: 1.00 Function... Transmitted Recognized Remarks Basie Default Channel Changed 1 1-16 1 1-16 Default Mode Messages Altered 3 POLY, OMNI OFF 3 POLY, OMNI ON/OFF MONO (M*1) -*1, (M = 1) -»3 Note Number True Voice 22-108, 15-113 (HP-800) 0-127 15-113, 15-108 (HP-600) w , . Note ON Velocity Note OFF 0 X (9n, v=0) O X v= 1-127 After Key’s Touch Ch's x X X X Pitch Bender X X 64 66 67 93 Control Change O O O O (v = 0) (v = 64) (v= 127) o o o O (v=0—41) (v=42 —84) (v=85 —127) Damper pedal Sostenuto pedal Soft pedal Chorus off Chorusl on Chorus2 on Prog Change True # O (0-127) O (0 — 6) can be ignorec 0 — 6 power—up sel by :ting System Exclusive X O multi timbre System ; common i Song Pos Song sei True X X X X X X System Real Time j Clock : Commands X X X X Aux Message i Local ON/OFF All Notes OFF Active Sense Reset X 0 0 X X O (123-127) O X Notes When power on, ch —1 OMNI OFF and POLY are sent. When Basic Channel is changed, Mode is set to 3. Mode 1 : OMNI ON, POLY Mode 3 : OMNI...
)
