valutazioni - 4, GPA: 3.8 ( )

Produttore : Roland File Size : 4.33 mb File Nome : Lingua di insegnamento:

Also, the Sound Parameters of any Instrument can be transferred using Exclusive messages. a. Transmit (Bulk Dump) Connections Data stored in the R- 8MK device. MIDI OUT II can be transferred to another MIDI MIDI IN i R-8MK II • Sequencer R-8MK II, etc. Transmitter Receiver Step 1 Set the basic channel (receive channel of the Instrument section) to the basic channel of the receive unit (see page 161). Step 2 With the Menu Display shown in the MIDI mode, press Numeric Key 8 to select "BLK DUMP.” BULK DUMP 0ÑLL ssetup ШБ EQSÜ * mm BULK DUMP ED h E Q ED 0 h E 0 d SI РТЫ * Step 3 Using Numeric Keys 1 to 6, specify the data group to be transferred. 1 ALL :All data is transferred. (SEQ and SETUP) 2 SETUP instrument Assign, Sound Parameters, Performance Parameters, Level Parameters, Feel Patches, Metronome, Roll, Sync Mode, and settings of MIDI functions are transferred. 3 SEQ002 ¡Rhythm Patterns (Pattern Bank A/B) and Song data are transferred. 4 SEQ [U :Rhythm Patterns (Pattern Bank A) and Song data are transferred. 5 SEQ OH rRhythm Patterns (Pattern Bank B) and Song data are transferred. 6 1 PTN :One Rhythm Pattern is transferred. 172 IfiJMIDI The display responds with : Select Data Group _A_ BULK DUMP ** press ENTER- When you have pressed Numeric Key 6, specify the Pattern Number to be transferred with | - l/OFF ji~+ I/ON j, the VALUE slider or the Numeric Keys. BULK DUMP ** Press ENTER,. Step 4 Press | ENTER 1. The display responds with “Are you sure?’’. Step 5 Press | ENTER j to transfer the data. When the data transfer is finished, ‘‘Completed" appears in the display. ♦ To leave this mode, press 1 EXIT . 173 ©MIDI b. Receive The R-8MK I! can receive Exclusive messages from another R-8MK II or MIDI device. Connections MIDI OUT i MIDI IN ' Seqencer, R-8MK II, etc. R-8MKИ Transmitter * Receiver To receive “ALL” or "SEG" data, delete all the programmable patterns in the internal memory (see page 139). / 1 ** ^ Set the basic chanrtel (receive channel of the Instrument section) to the basic channel of the Transmitter (see page 161). Step 3 Set the Exclusive Switch (Function Switch) to “ON” (see page 164). If the R-8MK II is stopped, it can receive Exclusive messages. ♦ When the R-8MKM cannot receive “1 PTN” data, delete some rhythm patterns in the internal memory to create sufficient memory space. Transfer the data once again. StejD*1 Step 2 ;-r c. Transmitting Sound Parameters Sound Parameters of an Instrument can be transferred via Exclusive messages. Connections MIDI OUT i MIDI IN r R-8MK II Sequencer, R-8MK II, etc. T ransmitter Receiver Step 1 With the unit set to the Edit Mode of Sound parameters, specify the Instrument whose Sound parameters should be transferred. Step 2 Press ENTER j to transfer the data. 174 ■i rvcrcntlNOC REFERENCE 1. Error Message Table If an error message appears in the display, refer to the information in this table for help. * L- -"i r* d n O t- r* 0 3 d y ►A RAM Card is not inserted correctly into the RAM Card Slot. o-lnsert the RAM Card properly (it should click into place). Name of previously loaded ROM card _i__ LGfiDED=< > ■Jj. {•“* :“■] j-"j t”s f . j- • Î-J fj y •A Sound ROM Card is not inserted correctly into the ROM Card Slot. ^Insert the Sound ROM Card properly (it should click into place). -+ ij |~ d F' I-" O 0 G *t" 0 d ►The protect switch on the RAM card is set to “ON.” »■Set the switch to “OFF." ■* •* 1 r-'i F- r o F' e r c a r d ! ►The card connected to the RAM Card Slot cannot be used with the R-8MK [|. ^-Replace the card with the specified RAM card (M-256E). ► R 0 I -~i Ti d \ R-8 M R F: KI > X f!’i F' i~' O P hr1 G id P d Î ►When the R-8MK li is turned on, the card connected to the ROM Card Slot is not an R-8MK It Sound ROM card. ^Replace the card with the specified Sound ROM card. •No more Rhythm Patterns can be written into P t- n i'iyi'iur'd full !! Pattern Bank currently selected. (Press EXIT return to the previous mode.) c^To continue Pattern Writing, select another Pattern Bank or erase some, existing Rhythm Patterns to make sufficient space. 175 »REFERENCE h Ci n 9 P'i 0 P'i O f~ ’d f' U 1 1 » •There is no additional memory left for songs. ct’To continue to write or edit song data, clear any unneeded songs in the unit's memory. B a r # O y 0 r f' 1 Ci i.'j •As a result of Pattern Append the number of bars in the pattern exceeds 99. ^Change the settings so that the total number will not exceed 99. b pi p t y p a i t e r n ►There is no data in the source rhythm pattern for Pattern Copy, Pattern Merge, Pattern Append, etc. o-Select another rhythm pattern. No E!v!0nt- ? •In Micro Timing Shift or Macro Timing Shift, the sound to be shifted is not yet selected. o"Check the procedure for the Micro Timing (Macro Timing) Shift. * I n 3 t n Ci t f Ü u n d •In Pattern Extract or Instrument Change, the Instrument you specified d...

Scarica la tua

Per scaricare, digitare 2 cifre :