valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
NOTE In the Panel Lock state, only the grand piano sound can be played. 1. Turn the volume to the minimum, and press the [POWER] switch to turn off the power. 2. Hold down the [TONE] button and press the [POWER] switch to turn on the power. Continue holding down the [TONE] button until the panel indicator lights. C1 D1 E1 F1 G1 A1 B1 While holding down the [TONE] button, press the [POWER] switch. All buttons are disabled. Adjust the volume by using the [VOLUME] knob. When you play the keyboard, the grand piano sound will be heard. To defeat the Panel Lock function, turn the volume down to the minimum, and turn on the power once again. Using the V-LINK function Connecting the RP101 to a V-LINK compatible image device allows you to control the images with the RP101. V-LINK V-LINK ( ) is a function that allows music and images to be performed together. By using MIDI to connect two or more V-LINK compatible devices, you can easily enjoy a wide range of visual effects that are linked to the expressive elements of a music performance. How to Use the V-LINK V-LINK is set to Off when the instrument is turned on. 1. While holding down the [METRONOME] and [REVERB/KEY TOUCH] buttons, the “A 7” note to turn the setting On, or press the “G7” note to turn the setting Off. C8 G7 Press Key Pressed Setting Explanation G7 Off The V-LINK function is switched off. A7 On The V-LINK function is switched on. You can control images using the twelve keys at the left end of the keyboard. NOTE While V-LINK is switched on, no sound is produced when you press any of the twelve keys at the left end of the keyboard. All button indicators light up when the V-LINK function is on. Changing Various Settings Changing Various Settings Normally, the settings of the various variations will revert to their default values when the power is turned off. However, you can specify that the various settings will be remembered even when the power is turned off. This function is called “Memory Backup.” Stored Settings • Brilliance (p. 20) • Reverb On/Off, Depth of the Reverb (p. 21) • Damper Resonance (p. 34) • Key Touch (p. 22) • Twin Piano Mode (p. 25) • Master Tuning (p. 32) 1. While holding down the [SONG] button and [METRONOME] button, hold down the A0 key for approximately five seconds. A0 Hold down for five seconds Restoring the Original Default Settings (Factory Reset) The memory backup settings can be restored to the original default condition. This operation is referred to as “Factory Reset.” 1. While holding down the [SONG] button and [METRONOME] button, hold down the C8 key for approximately five seconds. C8 Hold down for five seconds 2. When the indicators of all buttons start blinking, switch off the power, then turn it back on again. NOTE Executing this operation will not erase the recorded performance. When you want to erase the recorded performance, refer to “Erasing Recorded Performances” (p. 31). The indicators of all buttons will blink several times. When memory backup has been completed, the RP101 will return to its previous state. Connecting External Devices Connecting External Devices You can connect audio devices to play the sound of the RP101 through the speakers of your audio system, or to record your performance on a tape recorder or other recording device. When connecting, please use an audio cable with a standard phone plug (sold separately). Connection Examples NOTE To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. NOTE Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable. Playing the sound of the RP101 through the speakers of an audio system/Recording the performance of the RP101 on a recording device RP101 Input R/L (Line In, Aux In) . Use the following procedure when turning on the power. 1. Turn on the power of the RP101. 2. Turn on the power of the connected device. 3. Adjust the volume of each device. When Recording RP101 Performances on a Recording Device 4. Start recording with the connected device. 5. Perform on the RP101. 6. When the performance ends, stop recording on the connected equipment. Playing the sound of an audio device through the speakers of the RP101 RP101 Output R/L (Line Out, Aux Out) . Use the following procedure when turning on the power. 1. Turn on the power of the connected device. 2. Turn on the power of the RP101. 3. Adjust the volume of each device. NOTE You cannot use the RP101 to adjust the volume of the connected sound generating device. Turning off the power 1. Set the volume of the RP101 and of the connected devices to the minimum position. 2. Turn off the power of the RP101. 3. Turn off the connected equipment. Connecting External Devices Connec...