Log:
valutazioni - 4, GPA: 4 ( )

Istruzioni per l'uso Roland, Modello SYB-3

Produttore : Roland
File Size : 745.39 kb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :

Facilità d'uso


When operating on battery power only, the unit's indicator will become dim when battery power gets too low. Replace the battery as soon as possible. MODE CHART The Mode allows you to select two bass synthesizers, or T Wah mode. Each mode will work as follows. 1 - 7: < INTERNAL SOUND MODE >_ This mode detects the pitch and attack from the input bass guitar sound and creates sound using the internal sound source. Depending on the number selected, the output sound of the internal sound source will differ as follows: * When using an electric guitar, be sure to play using notes lower than the 12th fret of the third string. 1: (sawtooth wave) A sound with a sharpened wave edge is output. 2: rUU (square wave) A sound softer than Wave "1" is output. 3: rnrTiJ (Pulse Width Modulation) By modulating a square wave, the created sound will be fatter and broader. 4: /'VI (-1 oct) s A sawtooth wave one octave lower than "1" is output. 11 5: /1/1 + Noise Noise is added to sound "1," creating a typical bass synthesizer sound. 6: rOTOJ + Noise Noise is added to sound "3," creating a typical bass synthesizer sound. 7: /'V'l + Noise (-1 oct) Noise is added to sound "4," creating a typical bass synthesizer sound. * The above function will not work properly if you play chords. So, ha ve all the other strings muted, and play the bass guitar using single notes. * To play the next note while the previous note is still sounding, be sure to mute the previous note completely, then play the note with a distinct attack. By applying your finger or pick forcefully to the string, it will be easier to detect the attack. * When the unit cannot detect the attack, it may not sound correctly. 12 8 - 9: < WAVE SHAPE MODE >_ This mode directly transforms the audio input from the bass guitar into a synthesized bass sound. The direction of the movement of the cutoff frequency will differ depending on the number selected. 8: Up The cutoff frequency of the filter moves to the higher direction, in correlation with the level of the input sound. 9: Down The cutoff frequency of the filter moves to the lower direction, in correlation with the level of the input sound. 10 - 11: < T WAH >_ T wah is an effect whereby the cutoff frequencies of the fi Iter change automatical ly as the volume of the bass guitar changes. The direction of the movement of the cutoff frequency of the filter will differ depending on the number selected. 10: Up The cutoff frequency of the fi Iter moves to the higher di rection, i n correlation with the level of the input sound. 11: Down % The cutoff frequency of the filter moves to the lower direction, in correlation with the level of the input sound. OPERATING THE UNIT 1 When you have made the necessary connections, set the knobs as shown in the illustration. 2 Depress the pedal switch to turn the effect on. (Make sure that the CHECK indicator lights.) 3 Select the mode with the MODE switch 4 Set the SENS/DECAY knob to your taste, depending on the selected mode. Use the knob as a decay controlling knob to set the time for the filter to move. Use the knob as a sensitivity control knob to set the depth of the effect respective to the input level. 14 5 Adjust the cutoff frequency of the filter using the FREQUENCY knob. 6 Adjust the feedback amount of the filter using the RESONANCE knob. 7 Adjustthevolumeofthe effect and direct sounds using the EFFECT Level and DIRECT Level knobs. 15 USING THE HOLD FUNCTION In the Internal Sound Mode, you can use the Hold function that allows you to output the effect sound (synthesizer sound) continuously while holding the pedal down. It is also possible to mix the direct sound to the effect sound continuously being output by playing the bass guitar to it. (OPERATING THE UNIT) 1 Turn the Effect On by pressing the Pedal Switch. 2 Selectthe Internal Sound Mode (MODE = 1-7) using the Mode switch. Set the other knobs to your taste. 3 Play the bass guitar using single notes. 16 4 Press the Pedal Switch once again while the effect sound you wish to output continuously is being played, to hold it. Whi le you are pressing the Pedal Switch, the Check indicator will flash and the effect sound will be continuously output. 5 Release the Pedal Switch, and the indicator will stop flashing and instead light constantly, showing that the unit is returned to the normal Effect Ota status. USING THE MODE LABEL The SYB-3 is supplied with a Mode Label which shows the effect obtained with each of the modes. The Label (which serves as a quick reference) can be attached as shown in the illustration. .....'x : _Q_ SYB-s 3 MODES 1 2 rUTJlSQR) 3 runaiPWM) 4 SOUND /Vlf-tQCt) 5 /V"! + Noise 6 nJTil ♦ Noise / /V'i ♦ Noise(-loct) 8 WAVE Up S SHAPE Down 10 TWAH Up 11 Down 17 CHANGING THE BATTERY When the indicator goes dim or no longer lights whi le an effect is on, it means that the battery is nearly dead and ...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie