valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
* If you turn off the power or select a different patch while the display indicates “EDITED,” your edited patch will be lost. Settings Common to All Screens UPPER/LOWER (Tone Select Button) You can select the tone to be controlled, upper tone, lower tone or both tone. KEY MODE Key Mode refers to the Upper and Lower Tones are played on the keyboard. Value: WHOLE, DUAL, SPLIT, SEP, WHOL-S, DUAL-S, SPL-US, SPL-LS, SEP-S Applying Effects to the Sound Display Description WHOLE Upper Tone can be played in 16 voice polyphony DUAL Both Upper and Lower Tones are played by each key in 8 voices polyphony. SPLIT The Split mode divides the keyboard into upper and lower sections, where two different Tones can be played in 8 voices polyphony. That is, the VC-1 works like two 8 voice synthesizers. The Split Point (where the keyboard is divided into two sections) is shown next to the Key Mode indication. SEP (Separate) This mode is effective when an external MIDI device is controlling the VC1.(“ MIDI Implementation” (p. 88)) WHOL-S (Whole Solo) The Upper Tone is monophonic. DUAL-S (Dual Solo) Both Upper and Lower Tones are monophonic. SPL-US (Split Upper Solo) The Upper Tone is monophonic, and the Lower Tone is 8 voices polyphonic. SPL-LS (Split Lower Solo) The Lower Tone is monophonic, and the Upper Tone is 8 voices polyphonic. SEP-S (Separate Solo) This mode is effective when an external a MIDI device is controlling the VC-1. (“MIDI Implementation” (p. 88)) SPLIT The Split Point can be changed as follows. Value: C2–C7 C2–B2 C3–B3 C4–B4 C5–B5 C6–B6 C7 (middle C) BALANCE (Tone Balance) The volume balance of the Upper and the Lower Tone can be change. Value: 0–100 CHASE (Chase Button) Switches the Chase function on and off. Touch the button once to switch the function on; touch it again to switch the function off again. Value: OFF, ON PORTAMENTO (Portamento Button) Switches the Portamento function on and off. Portamento is a slide from one pitch to another, and is often used for violin performance. Touch the button once to switch the function on; touch it again to switch the function off again. Value: OFF, ON Applying Effects to the Sound CONTROL Patch Controls determine how the Control Functions actually affect the Upper and the Lower Tones. Bend (Bender Range) This sets the variable range of the pitch change caused by moving the Bender lever fight and left. The variable range set here may result differently depending on the setting of the Tone Parameter Bender Mode (p. 60). Value: 0–12 AfterPB (Aftertouch, Pitch Bender) This sets the sensitivity of the aftertouch effect on pitch. Higher values mean higher sensitivity. A Minus setting decreases the pitch, and a plus setting increases it. Value: -12–+12 Hold (Hold Mode) This selects the Tone that on the Pedal Hold effect. When the Key mode is Whole, Pedal Hold always works whichever of the above three mo...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - VC-1 D-50 (2.36 mb)