valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
Please assemble in accordance with the sequence given below. Assembly should be carried out by at least two persons. Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage. Be sure to tighten up all screws upon completing assembly of each unit. To disassemble, reverse the assembly sequence given below. If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. Assembly procedure 1 You will need a Phillips screwdriver to assemble the stand. 2 Open the box and remove all parts. Make sure that all of the parts are included. — Screw set (VS64540) - (A) Long screws (B) Short screws (C) Small screws (D) Caps (E) Knob bolts (6 x 30 mm) ijiiiiiiiiiiiiiiiiiiiii (6 x 16 mm) rjjiiiiiiiiii (4 x 8 mm) 0mnni c^b (6 x 40 mm) ft- 6 pcs. 2 pcs. 4 pcs. 4 pcs. 4 pcs. Upp e r beam Attachments % - I?l Right /s Left n |v side Zy \\ side panel panel // B races 2 pcs . \\ (identical) i i----- 4 pcs. 3 Attach the upper beam and cap (D). Notes: Tighten four long screws (A) loosely at first, then do them hardly to set each screw in place correctly. When inserting the screws, turn them in loosely at first, then tighten them after making sure the upper beam is positioned correctly. :IEZ 1 Secure the upper beam with long screws (A). 2 Attach the caps (D). 4 Attach the braces. © Attach the braces to the center of the upper beam using the short screws (B). Do not tighten the screws yet. 2 Attach the stays to the side panels using the remaining long screws (A). Again, do not tighten the screws yet. 2 Tighten the screws when all four are in place. 5 Set the attachments. Note: Fix them using small screws (C). Attach ments Small screws-