valutazioni - 3, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
; 7 ; ;; 7; \ ; / niinnCEI\‘ u / 7/ :H.i ; / ITV/AVI I YSP I The ENHANCER indicator lights up when “ENHANCER:HIGH” or “ENHANCER:LOW” is selected. 2 Press ENHANCER to select the Music Enhancer. The currently selected mode appears in the front panel display. \ I / — ENHANCER — ' I N Lights up Notes • The Music Enhancer is not compatible with the CINEMA DSP programs. If a CINEMA DSP program is selected while the Music Enhancer is on, the Music Enhancer is turned off automatically. In this case, the Music Enhancer remains off even after the CINEMA DSP program is canceled. Likewise, if the Music Enhancer is turned on while a CINEMA DSP program is selected, the CINEMA DSP program is canceled automatically. In this case, the CINEMA DSP program remains off even after the Music Enhancer is turned off. The Music Enhancer is available only when a setting other than My Surround (see page 55) is selected as the beam mode. 3 ENHANCER ENHANCER 66 En Using the volume mode (Night listening enhancer/TV volume equal mode) The night listening enhancers are designed to improve listenability at lower volumes or at night. In addition, you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change (i.e. due to commercials, etc.). The EQUAL indicator lights up in the front panel display when “TV EQUAL VOLUME” is selected. N I / — EQUAL — ' I S Lights up • Select NIGHT:CINEMA when watching films to reduce the dynamic range of film soundtracks and to make dialog easier to hear at lower volumes. • Select NIGHT:MUSIC when listening to music sources to preserve ease-of-listening for all sounds. • Select TV EQUAL VOLUME when watching TV programs. • Select OFF to turn off the volume mode. 3 Press <| / |> to adjust the effect level of compression while NIGHT:CINEMA, NIGHT:MUSIC, or TV EQUAL VOLUME is displayed. 1 Set the operation mode selector to YSP. a ITV/AVI YSP Press VOL MODE repeatedly to select NIGHT:CINEMA, NIGHT:MUSIC, TV EQUAL VOLUME, or OFF. •NIGHT^CInEMH I NIGHT:MUSIC I I The NIGHT indicator lights up in the front panel display when “NIGHT:CINEMA” or “NIGHT:MUSIC” is selected. N I / — NIGHT — ' I S Lights up *•Effect.Lvl:MIN I Effect.Lvl:MID I — Effect.Lvl:MAX Select Effect.Lvl:MIN for minimum compression. Select Effect.Lvl:MID for standard compression. Select Effect.Lvl:MAX for maximum compression. Notes The volume mode settings are canceled if you press STANDBY/ON or disconnect the AC power supply cable from the AC wall outlet. The volume mode settings become ineffective when My Surround is selected as the beam mode (see page 55). 2 VOL MODE 67 En Using the sleep timer Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source. Each time you press SLEEP, the front panel display changes as shown below. ITV/AVI I YSP I ♦ I EE v 1 Set the operation mode selector to YSP. a Press SLEEP repeatedly to set the interval for the sleep timer. Choices: 120min, 90min, 60min, 30min, OFF The SLEEP indicator flashes in the front panel display while switching the interval for the sleep timer. Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator lights up in the front panel display, indicating that the sleep timer is activated. N ' / — SLEEP — / i \ I Lights up SLEEP SLEEP Flashes 3 2 68 En Using the sleep timer ■ Canceling the sleep timer 1 Set the operation mode selector to YSP. HV/AV. , ■ r~YSP~l~ I X 2 Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display. SLEEP ♦ Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated. SLEEP Disappears Note The previous setting for the sleep timer before you deactivate it is stored in the system memory. y The sleep timer setting can also be deactivated if you press STANDBY/ON to set this unit to the standby mode or unplug the AC power supply cable from the AC outlet. 3 m 3 69 En Displaying the input source information You can display the format and sampling frequency of the current input signal in the front panel display. 2 Press DISPLAY. The information on the current input signal is displayed as follows: or 1 Set the operation mode selector to YSP. ITV/AVI I YSP I" Input signal Indicator Sampling frequency Dolby digital DOLBY DGTL 32/44.1/48/64/ 88.2/96 kHz DTS DTS PCM PCM Analog ANALOG - y When the input signal is unclear, “_” is displayed for the sampling frequency. 7С En Using the HDMI control feature You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI...