valutazioni - 2, GPA: 5
(
)
)
|
Facilità d'uso
If you set the INPUT SELECTOR switch so that it matches the setting made via the control signal from the CS1D, “ O.x. ” lights up continuously. B INPUT SELECTOR switch Use this switch to select an input source from the INPUT A or B connector on the rear panel. During the Mirror mode operation, the control signal sent from the CS1D has priority, and the INPUT SELECTOR switch is disabled. In this case, the OUTPUT UNIT ID indicator shows the status. For more information, refer to 1 OUTPUT UNIT ID indicator. C POWER ON/OFF Use this switch to turn the power to the AO8 on and off. When the power is turned on, the OUTPUT UNIT ID indicator lights up. D INPUT connectors A and B These connectors are used to input multi-channel digital audio signals from the DSP1D/DSP1D-EX. Use the INPUT SELECTOR switch 2 on the front panel to select an input source (INPUT A or INPUT B). Be sure to use the included genuine Yamaha half-pitch 68-pin cable for connection. Optional genuine Yamaha cables in a variety of lengths are also available. E WORD CLOCK IN jack, ON/OFF switch The WORD CLOCK IN jack is used to provide the word clock to the AO8 from a clock generator or a connected external device. Use a BNC cable with an impedance of 75 . for connection. The WORD CLOCK ON/OFF switch is used to terminate the word clock connection. Basically, if the AO8 is the last device of the word clock chain, or if nothing is connected to the WORD CLOCK IN/OUT jacks, set this switch to ON. F WORD CLOCK OUT jack The WORD CLOCK OUT jack is used to provide word clock from the AO8 to the connected external device, such as a digital MTR or a DAT recorder. Use a BNC cable with an impedance of 75 . for connection. “. .” “ .x.” “. .” “ ”( ......“ ”) s Sampling frequency (external sync) 39.69 kHz – 50.88 kHz Power supply USA and Canada : 120 V, 60 Hz Others : 230 V, 50 Hz Power consumption 120 W Dimensions (W . H . D) 480 mm . 141.5 mm . 466.8 mm Weight 15.4 kg Operating temperature 10 – 35°C Power cable length 2.1 m Cooling fan speed always fixed Accessories Connection cable (68-pin, D-sub, half-pitch) x 1, Length: 3m Digital I/Os I/O connectors Level Type INPUT A, B RS-422 D-sub, half-pitch, 68-pin connector (female) WORD CLOCK IN TTL/75 . (ON/OFF) BNC connector WORD CLOCK OUT TTL/75 . BNC connector Slots Card Output LMY4-DA Channel 1 – 4 s 455466.8 480 430 132141.5(3U) OUTPUT UNIT ID INPUT SELECTOR A B POWER ON/ OFF 1 2 3 4 5 6 7 8 ANALOG OUTPUT BOX 9.5 unit: mm • Specifications and appearance are subject to change without notice for improvement. • For European Model Purchaser/User information specified in EN55103-1 and EN55103-2. Inrush Current: 13A Conformed Environment: E1, E2, E3 and E4. YAMAHA CORPORATION YAMAHA CORPORATION P.O. Box 3, Hamamatsu, 430-8651, Japan .......... -DA8 A...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - AO8 (216.51 kb)