The following table describes how to use the Copy & Paste function. Copying a channel Right-click (+click) a copy source channel, then choose [Copy]. Pasting a channel Right-click (+click) the copy destination channel, then choose [Paste]. . Resetting to the default value (Ctrl ( ) + click) Move the cursor to a control or a parameter value, then hold down the key ( ) and click the mouse button to reset the value to the default (e.g., to reset an Input Channel fader to –., or reset a pan setting to Center). . Ctrl( )+Shift+Click Move the cursor to a fader or AUX Send control, then hold down the key ([ ]) and key and click the mouse button to reset the value to the nominal level. Getting ShortcutsIndex Windows DM1000 Editor—Owner’s Manual 6 Using DM1000 Editor Windows Master Window The Master window enables you to switch between layers and control Stereo Out sig 1 nals. To open this window, choose [Master] from the [Windows] menu. A[ONLINE]/[OFFLINE] button Repeatedly clicking this button toggles between online and offline status. Note: If DM1000 Editor is not connected or is not communicating with the DM1000, clicking this button will not switch the unit from offline to online. This indicator is displayed when DM1000 Editor is connected to the DM1000 correctly. If the connection is correct, the DM1000 Editor parameters will work in unison with the DM1000 parameters. 2 This indicator is displayed when DM1000 Editor is not connected or is not communicating with the DM1000, or when you have selected Offline Edit. If the connection is incomplete, the DM1000 Editor parameters will not work in unison with the DM1000 parameters. BMeters These meters display the output level of the Stereo Out when Surround mode is set to “STEREO,” or the Bus Outs used for surround processing when Surround mode is set to 3-1, 5.1 or 6.1. The meters in 3-1, 5.1 and 6.1 Surround modes are shown on the 3 right. CLAYER buttons These buttons are used to select the Layers. 4 DPAN CONTROL 5 These buttons are used to select either “STEREO” (Stereo display mode) or 3-1 5.1 6.1 6 “SURR” (Surround display mode). The 7 Pan control on the Input Channels is a rotary control when “STEREO” is 8 selected, and a dot on a pan graph when “SURR” is selected. If Surround mode is set to Stereo, the [SURR] button will be disabled. EScene number display This display indicates the currently-recalled scene’s number. F[AUTO] button This button displays the Automix status of the Stereo Out. 9 G[SELECT] button This button is used to select the Stereo Out. H[ON] button This button turns the Stereo Out on and off. It appears orange while the Stereo Out is on. IMaster fader J This is the Stereo Out fader. JFader value indicator This indicator indicates the fader position in decibels (dB). Getting ShortcutsIndex Windows DM1000 Editor—Owner’s Manual 7 Layer Windows The Layer window displays 16 channel strips. You can select a layer using the LAYER buttons in the Master window. To open the Layer window, choose [Layer] from the [Windows] menu. Note: •You can selectively turn on or off some of channel strips by using the [View] menu. •You can open multiple Layer windows by choosing [Windows] menu -> [Layer] -> [Additional View]. The titles of these windows will indicate [Locked]. Windows that are indicated as [Locked] will not reflect layer changes made on the console or in the Master window. If you want the Layer windows to reflect the changes, right-click each window (Macintosh: + click), then select the desired layer using the LAYER buttons. Getting ShortcutsIndex Windows . Input Channels Selecting the 1-16, 17-32, or 33-48 button in the Master window displays the corre- A B C D E F G H I J K L M N O sponding Input Channel strips. ASOURCE parameter This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears. BRouting buttons These buttons are used to route the Input Channel to the Bus Outs. C[STEREO] button This button is used to route the Input Channel’s signal to the Stereo Out. D[DIRECT] button This button turns on and off the Input Channel’s routing to its Direct Out. EDirect Out parameter This parameter is used to select the Direct Out destination. To select a destination, click the parameter and choose from the list that appears. F[PHASE] button This button is used to reverse the signal phase of the channel. G[INSERT] button This button is used to turn on and off the Input Channel’s Insert. H[GATE] button This button is used to turn on and off the Input Channel’s Gate. IGate open/close indicators These indicators display whether the Gate is open (green) or closed (red). JGate threshold This displays the Gate Threshold, which can be set by dragging. K[COMP] button This button is used to turn on and off the Input Channel’s Compressor. LCompressor curve This display shows the Compressor’s curve. M[EQ] button This button is used to turn on and...
)
