valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
For example, “80-12” means a cutoff frequency of 80 Hz and a filter response of –12 dB/octave. “L” means Linkwitz filter. Other filters are Butterworth. About the Presets About the Presets DVD LFE80Hz This is a preset optimized for DVD-Video production. The LFE playback bandwidth is set up to 80 Hz. When using this preset, we recommend that you use an external device to apply an LPF (fc=80 Hz, –24 dB/oct) to the LFE master source. To monitor audio on DVD-Audio or SACD discs, change the LFE level (AMP) and LPF (LPF1) to 0 dB and THRU, respectively, if necessary. The LFE output gain on some DVD players and decoders may already be set to +10 dB. To monitor the output from such devices, change the LFE level (AMP) to 0 dB. (2) DVD LFE120Hz This is also a preset optimized for DVD-Video production. This preset is the same as preset (1) mentioned above, except that the LFE playback bandwidth is set up to 120 Hz. Use this preset to monitor standard LFE signals recorded on DVD-Video discs that include the high-end frequency ranges (120 Hz). (3) Movie LFE80Hz This preset is the same as preset (1) mentioned above, except that the output level of surround channels is set to –3 dB when the Monitor Matrix mode is 5.1 or 6.1. This preset is suitable for movie production. When using this preset, we recommend that you use an external device to apply an LPF (fc=80 Hz, –24 dB/oct) to the LFE master source. (4) Movie LFE120Hz This preset is the same as preset (2) mentioned above, except that the output level of surround channels is set to –3 dB when the Monitor Matrix mode is 5.1 or 6.1. This preset is suitable for movie production. (5) Bypass Use this preset not only for bass management but to bypass all parameters, such as the LFE level & LPF, surround channel level, etc. To disable only the bass management, select another preset, then turn off the BASS MANAGEMENT ON/OFF button. ¦ THX Presets: The following presets have been approved by THX™ Ltd. for use in THX pm3™ Certified Studios*. They are designed to provide dedicated parameters for the proper playback of multi-channel audio content in bass managed systems and to be compatible with subwoofer-satellite type consumer systems. *Use of a THX preset does not permit a studio to use the designation - THX pm3 Certified Studio. The THX pm3 Studio Certification Program uses performance and design specifications to create calibrated environments for optimum sound and picture presentation. For more information, visit the THX website at [THXD] THX DVD This preset is configured for DVD-Video production. Use this preset when mixing and/or monitoring audio content not from a theatrical film source. The parameters cannot be changed. [THXF] THX Film This preset is configured for Film pre-production. Use this preset when mixing and/or monitoring theatrical film-based content (such as a pre-mix for film). The parameters cannot be changed. [THXM] THX Music This preset is configured for DVD-Music production. Use this preset when mixing and/or monitoring multi-channel music content (including DVD-Audio and SACD). Only one parameter can be changed. The LFE gain (AMP) can be set to +10dB (default) or 0dB. Select the level that complies with the standards of the target media. Please note: The LFE output gain on some DVD players, receivers, and/or decoders may already be set to +10dB. Select the 0dB setting only if the destination environment (home theatre, etc.) has the LFE gain set to 0dB. Otherwise, use the default setting. •• These buttons are used to turn on and off the Monitor Alignment Attenuator and Delay parameters of all Surround speakers. The MONITOR ALIGNMENT diagram and Surround Channel Attenuator and Delay parameters, which are displayed when either of these buttons are selected, allow you to align the surround monitor speakers by attenuating and delaying Surround Channels as necessary. The Attenuator parameters can be set –., –12 dB to +12 dB in 0.1 dB steps. The Delay parameters can be set from 0 to 30 msec in 0.02 msec steps. Note: •Please note that the above settings apply only to the signals being monitored. They do not affect the normal bus outputs. •If you’re monitoring in surround mode 6.1 and monitor matrix mode 6.1, you’ll need to make the above settings separately from when in other modes. Tip: The settings you make here can be stored in the surround monitor library. . Canceling the parameter display value in the channel strip display (page 274) A “Ch Numeric Disp OFF” preference has been added to the PREFERENCES 1 page. In V2.0, the channel strip display would switch to showing the parameter value when you operated a channel fader or encoder (pan setting). If you turn on this preference item, the display will not be switched to the parameter value. . MY16-C card support (pages 70 and 349) The MY16-C CobraNet interface card is now supported. However, the following restrictions apply when installing the card into a DM2000 slot. • Only one MY16-C card can...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - DM2000VCM (113.09 kb)