valutazioni - 4, GPA: 4.5
(
)
)
|
Facilità d'uso
Click [Switch]. Quick Guide Mixer Basics Step Recording with Cubase AI 4 5 This section describes the procedure for recording to the Cubase AI 4 software we installed earlier via the MG mixer. For details on operation of the Cubase AI 4 software refer to the pdf-format manual provided with the software. NOTE NOTE Macintosh: Select [VST Audio System] in the [Device] field on the left side of the window. Select [USB Audio CODEC (2)] in the [ASIO Driver] field on the right side of the win- dow, and click [OK]. Skip ahead to step 6, below. Under Mac OS X you can select either [USB NOTE Audio CODEC (1)] or [USB Audio CODEC (2)] in the [ASIO Driver] field. Normally you should select [USB Audio CODEC (2)], but if you will only be playing back and mixing previously recorded data you can select [USB Audio CODEC (1)] to lighten the load on the computer’s CPU. 4 On a Windows computer select [ASIO DirectX Full Duplex Driver] in the [Devices] field on the left side of the Device Setup window, and click [Control Panel] on the right side of the window. 10 MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual 7 Select [New Project] from the [File] menu to create a new project file. The new project dialog window will open. For this example select [CAI4 - 4 Stereo 8 Mono Audio Track Recorder] and click [OK]. Recorded Cubase AI 4 data is stored as a “project file”. 8 When the directory selection dialog win- dow appears, select the folder to which the project and audio files for the project are to be stored, and click [OK]. An empty project window with 4 stereo and 8 monaural tracks will appear. Project window Transport panel Mixer window Mixer Basics Quick Guide 7 Select [New Project] from the [File] menu to create a new project file. The new project dialog window will open. For this example select [CAI4 - 4 Stereo 8 Mono Audio Track Recorder] and click [OK]. Recorded Cubase AI 4 data is stored as a “project file”. 8 When the directory selection dialog win- dow appears, select the folder to which the project and audio files for the project are to be stored, and click [OK]. An empty project window with 4 stereo and 8 monaural tracks will appear. Project window Transport panel Mixer window Mixer Basics Quick Guide 5 The ASIO Direct Sound Full Duplex Setup dialog window will be displayed. Check only the input port and output port [USB Audio CODEC] checkbox. 6 Make sure that “USB Audio CODEC 1/2” are shown in the [Port System Name] field, and check the [Visible] column in the Device Setup window. Click [OK] to close the window. If the [Port System Name] field does not NOTE change, close and restart the Cubase AI 4, then open the Device Setup window. NOTE MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual 11 Preparing to Record 1 Click in the track list (the area in which the track names are displayed) to select a track to record on. The various settings for the selected track are available in the Inspector on the left side of the display. You will normally use a stereo track when recording synthesizers, and a monaural track when recording vocals or guitar. 2 Click the Input Routing field in the Inspec- tor to select the audio input source. Select “Stereo In 1” for a stereo track and “Left (Right)-Stereo In 1” for a monaural track. 3 Make sure the [Record Enable] button for the track to be recorded is turned on. If the [Record Enable] button is off, click it to turn it on. Inspector Input routing [Record Enable] button Track list Quick Guide Mixer Basics Preparing to Record 1 Click in the track list (the area in which the track names are displayed) to select a track to record on. The various settings for the selected track are available in the Inspector on the left side of the display. You will normally use a stereo track when recording synthesizers, and a monaural track when recording vocals or guitar. 2 Click the Input Routing field in the Inspec- tor to select the audio input source. Select “Stereo In 1” for a stereo track and “Left (Right)-Stereo In 1” for a monaural track. 3 Make sure the [Record Enable] button for the track to be recorded is turned on. If the [Record Enable] button is off, click it to turn it on. Inspector Input routing [Record Enable] button Track list Quick Guide Mixer Basics NOTE 4 Play the instrument to be recorded, and adjust the MG mixer’s GAIN controls, channel faders and STEREO OUT Master fader so that the Clipping indicator never light.
Strumenti Musicali - MG166C-USB (2.05 mb)
Strumenti Musicali - MG206C-USB (2.05 mb)